Reference:Administration/Diagnostics/Logging

From innovaphone-wiki

Jump to: navigation, search
There are other versions of this article: Reference (this version) | Reference7 | Reference9

Using the syslog link, the log messages of the device can be viewed directly in active operation. The messages are continuously automatically updated and are scrolled upwards, out of the window.

Only messages that were enabled in the Logging submenu are displayed. The following settings can be enabled:

  • TCP: All TCP connections.
  • PPP: All PPP connections.
  • Relay Calls: All calls that go via the Relay – only visible for devices with S0 or S2m interface.
  • Relay Routing: All calls that must be routed via the Relay – only visible for devices with S0 and S2m interface.
  • DECT-Master: All DECT-Master connections – only visible for IP-DECT systems.
  • DECT-Radio: All DECT-Radio connections – only visible for IP-DECT systems.
  • H.323 Registrations: All H.323 registrations.
  • SIP Registrations: All SIP registrations.
  • Config Changes: All configuration changes.
  • TEL1-n: All TEL1-n connections – only visible for devices with TEL interface.
  • PPP: All PPP connections – only visible for devices with PPP interface.
  • BRI1-n: All BRI1-n connections – only visible for devices with BRI interface.
  • PRI1-n: All PRI1-n connections – only visible for devices with PRI interface.


Clicking OK saves the settings made.

Personal tools