Reference:Configuration/General/SNMP

The VoIP device allows the operating state to be monitored using SNMP (Simple Network Management Protocol with version 1.0). Standard MIB II and a manufacturer-specific MIB (Management Information Base) are supported. Detailed information about this MIB can be obtained from a certified innovaphone dealer or downloaded directly in the download area of the innovaphone homepage (http://www.innovaphone.com).

Community If the standard community name public is not being used, a different community name can be entered in this field.
Device Name For more detailed information, a device name can be specified here for the SNMP agent.
Contact As can a contact person (Contact).
Location As can a location (Location).
Authentication Trap Access via SNMP is only possible if the correct community name is entered. If this check box is checked, a trap is generated in the case of access with an incorrect community name.
Trap Destination Destinations for trap messages also have to be defined if the device is to trigger the traps defined in the manufacturer-specific innovaphone MIB.
Allowed Networks To increase security, access to the device can be restricted by restricting SNMP access to a defined list of computers or IP address ranges.

...go back