Reference:Configuration/General/SNMP
Jump to navigation
Jump to search
There are also other versions of this article available:
Reference (this version) | Reference7 | Reference9 | Reference13r1 | Reference13r2
The VoIP device allows the operating state to be monitored using SNMP (Simple Network Management Protocol with version 1.0). Standard MIB II and a manufacturer-specific MIB (Management Information Base) are supported. Detailed information about this MIB can be obtained from a certified innovaphone dealer or downloaded directly in the download area of the innovaphone homepage (http://www.innovaphone.com).
Community: | If the standard community name public is not being used, a different community name can be entered in this field. |
Device Name: | For more detailed information, a device name can be specified here for the SNMP agent. |
Contact: | As can a contact person (Contact). |
Location: | As can a location (Location). |
Authentication Trap: | Access via SNMP is only possible if the correct community name is entered. If this check box is checked, a trap is generated in the case of access with an incorrect community name. |
Trap Destination: | Destinations for trap messages also have to be defined if the device is to trigger the traps defined in the manufacturer-specific innovaphone MIB. |
Allowed Networks: | To increase security, access to the device can be restricted by restricting SNMP access to a defined list of computers or IP address ranges. To disable SNMP access completely just enter 0.0.0.0 as Address and 255.255.255.255 as Mask. |