Reference talk:Update Server

Bootcode-Activation

In diesem Artikel fehlt die Dokumentation zur Aktivierung eines neuen Bootcodes. Siehe auch Mantis 14406.

no reliable method as of now - ckl 15:01, 3 March 2008 (CET)

Unfortunately, there is no reliable way to force a cold start using the update server.

  Since V6.00 sr2-hotfix3 the commands "reboot" and "ireboot" are available.
  The system is run down the same way as with "reset" and "ireset" but finally a watchdog restart is forced instead of a soft restart.

Force-Kommando nicht richtig beschrieben

Im "scfg /force"-Kommando wird die Zeit in Stunden angegeben. In der Tat (SR2HF5) wird die angegebene Zahl als Minuten interpretiert. Somit stimmt auch das Beispiel mit /force 168 nicht. Weiterhin ist unklar on das Kommando "WEEKLY" wie in der Beispielzeile dargestellt tatsächlich gültig ist. Es ist sonst nicht dokumentiert.

   The 'scfg' extensions are not available in Version 6 firmware:
   "Beginning with V7.00 the optional Parameters <final-command>, <save-serial> and /force <hours> will be recognized."
   The example is intended to be used with V7 firmware only.

V7 Update Server and differences between IP200 and IP200A

Because there is no V7 Firmware for IP200 will there be some change with IP200A Firmware to look for a Document like IP200A.htm? If not the IP200 would take the same File and try to load a V7 Firmware or would quit because there is no IP200.bin?

Actually there no problem with IP200 and IP200A in Update Server beahvior, cause the Update Server URL is appendixed with correct values: update-IP200.htm and update-IP200A.htm for each particular device type. afi 14:33, 18 November 2008 (CET)