All public logs
Jump to navigation
Jump to search
Combined display of all available logs of innovaphone wiki. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).
- 16:28, 28 June 2010 TE-SYSTEMS GmbH talk contribs uploaded File:Controller-wizard-10.PNG (Well done, we are up and running.)
- 16:27, 28 June 2010 TE-SYSTEMS GmbH talk contribs uploaded File:Controller-wizard-9.PNG (All symbols on the left are green? You are almost done. Any red "X" symbol? Go back and check your input.)
- 16:26, 28 June 2010 TE-SYSTEMS GmbH talk contribs uploaded File:Controller-wizard-8.PNG (In the comment, we add the phone number of the XCAPI controller so we don't have to look it up in the routing table. In this example, the XCAPI can be called via 81893 (+ unlimited digits) from the PSTN or via 93 (+ unlimited digits) from the PBX. This c)
- 16:24, 28 June 2010 TE-SYSTEMS GmbH talk contribs uploaded File:Controller-wizard-7.PNG (There is no need for STUN requests if the XCAPI and the innovaphone gateway are running in the same local subnet.)
- 16:23, 28 June 2010 TE-SYSTEMS GmbH talk contribs uploaded File:Controller-wizard-6.PNG (We do not need any registrar or proxy functionality because the XCAPI is connected as a SIP trunk.)
- 16:22, 28 June 2010 TE-SYSTEMS GmbH talk contribs uploaded File:Controller-wizard-5.PNG (Enter the IP address of the innovaphone gateway as default SIP domain. This is the address where the XCAPI will send all SIP requests to. Please do not use any DNS hostnames in this case because of interoperability issues.)
- 16:22, 28 June 2010 TE-SYSTEMS GmbH talk contribs uploaded File:Controller-wizard-4.PNG (The XCAPI is connected as a SIP trunk, so we don't need any user information for authentication.)
- 16:21, 28 June 2010 TE-SYSTEMS GmbH talk contribs uploaded File:Controller-wizard-3.PNG (Select a generic SIP template from the list of predefined VoIP environments.)
- 16:20, 28 June 2010 TE-SYSTEMS GmbH talk contribs uploaded File:Controller-wizard-2.PNG (Select the network interface that will be used for the SIP connection between the XCAPI and the innovaphone gateway.)
- 16:20, 28 June 2010 TE-SYSTEMS GmbH talk contribs uploaded File:Controller-wizard-1.PNG (Add a new VoIP controller with the controller wizard.)
- 16:18, 28 June 2010 TE-SYSTEMS GmbH talk contribs uploaded File:Controller-wizard-0.PNG (XCAPI configuration without VoIP controllers. Start the Controller Wizard to add a new controller.)
- 15:51, 28 June 2010 TE-SYSTEMS GmbH talk contribs uploaded File:8-to-gw3-routes.PNG (Various interfaces (PSTN, PBX) route to the XCAPI SIP trunk via prefix 93.)
- 15:50, 28 June 2010 TE-SYSTEMS GmbH talk contribs uploaded File:7-from-gw4-route.PNG (The route from GW4 (accessed by local PBX users via prefix 93) leads to GW3, the XCAPI SIP trunk.)
- 15:49, 28 June 2010 TE-SYSTEMS GmbH talk contribs uploaded File:6-from-gw3-routes.PNG (Overview of the routes from GW3 (the XCAPI SIP trunk) to PSTN and PBX.)
- 15:48, 28 June 2010 TE-SYSTEMS GmbH talk contribs uploaded File:5-gw4-config.PNG (GW4 uses H.323 to register with the gateway object in the local PBX.)
- 15:47, 28 June 2010 TE-SYSTEMS GmbH talk contribs uploaded File:4-gw3-config.PNG (Configuration of GW3, the SIP trunk towards the XCAPI.)
- 15:46, 28 June 2010 TE-SYSTEMS GmbH talk contribs uploaded File:3-gw-3-4.PNG (Overview of the gateways in the gateway administration. GW3 is connected to the XCAPI via SIP, GW4 is registered with the local PBX via H.323.)
- 15:45, 28 June 2010 TE-SYSTEMS GmbH talk contribs uploaded File:1-pbx-gw-object-gw-4.PNG (Configured gateway object in the PBX for routing calls from the PBX to the XCAPI SIP gateway. A local H.323 gateway (GW4) is registered with this object.)
- 15:44, 28 June 2010 TE-SYSTEMS GmbH talk contribs uploaded File:2-pbx-gw-object-gw-4-config.PNG (Gateway object in the PBX for routing calls from the PBX to the XCAPI SIP gateway.)