Reference:Configuration/Registration/Function-Keys/Boolean-Object
Jump to navigation
Jump to search
There are also other versions of this article available:
Reference (this version) | Reference9 | Reference11r1
Boolean Object
This function monitors the state of the addressed Boolean Object in the innovaphone PBX. A Boolean Object as seen by the user is in one of four states:
- Automatic Off State: The automatic mode FALSE rule applies.
- Automatic On State: The automatic mode TRUE rule applies.
- Manual Override Off State: The manual override FALSE rule applies (automatic mode rules are disabled).
- Manual Override On State: The manual override TRUE rule applies (automatic mode rules are disabled).
How a state is indicated at the phone is configured under the corresponding topic.
Boolean Object Identification
- The number and/or name of the Boolean Object is configured here.
Pressing the key sets up a connection to the Boolean Object. The state of the Boolean Object can be changed then by entering the following DTMF codes:
- 01 - Clear Manual Override, i.e. switch to the automatic mode rule according to current time of day.
- 11 - Manual Override On, i.e. apply the manual override TRUE rule.
- 10 - Manual Override Off, i.e. apply the manual override FALSE rule.
Note: This function will only work if the setting up user and the Boolean Object belong to the same group and this group is selected under “Group indications” in the confguration of the setting up user at the innovaphone PBX.