Search innovaphone-wiki

From innovaphone-wiki

Jump to: navigation, search

2 inaccessible namespaces removed.

Fundstellen in weiteren wikis

  • More matches in wiki-internal

Displaying 61 to 80 of 155 text matches

... on Deskphones and Dect-Phones Confirmation via DTMF ( positive, negative, PIN-based, Time) Textmessage via SOAP Interface Loudspeaker broadcast Control call forwarding Call intrusion Call recording LDAP Integration Innovaphone to import ... pressed. The pbx-prefixes: Image:Serinus - Serinus GmbH - 3rd Party Product 7 EN.PNG '''SOAP connection''' The SOAP connection is used for forced release or loudspeaker announcements Create a new user in ...
... operators do not need to be active members of these groups. Operator connect for SOAP On the SOAP/TAPI interface a call to a waiting queue is normally indicated as connected as ...
Up to and including version 6 service release 1 (V6 sr1), CDRs are only sent by the RELAY component, which is the gateway routing controlled be the applets voice routes. This will change along version 6 service release 4 (V6 sr4 ) For now, to learn about intra-PBX calls, you will need to set up a SOAP client (cf. the PBX SOAP Api). Category:Faq PAGENAME
... > Related Articles This interface is not meant to create 1st party CTI applications. Rather use SOAP for this. Reference:SOAP API Category:Howto PAGENAME
... in the PSTN. Check if the DTMF - tones are received at the PSTN phone(using SOAP). For manual test create a Waiting Queue with Map on some PBX connected via PSTN ... description: PSTN Phone calls Tel1 Check if the DTMF - tones are received at Tel1(using SOAP). For manual test create a Waiting Queue on the tested PBX with Map. trace on ...
... operators do not need to be active members of these groups. Operator connect for SOAP On the SOAP/TAPI interface a call to a waiting queue is normally indicated as connected as ...
... operators do not need to be active members of these groups. Operator connect for SOAP On the SOAP/TAPI interface a call to a waiting queue is normally indicated as connected as ...
... control panel, the TSP will not be added TAPI talks to the PBX using Reference7:SOAP_API SOAP which in turn uses HTTP for communication. Both secure (https) and non-secure (http ...
... operators do not need to be active members of these groups. Operator connect for SOAP On the SOAP/TAPI interface a call to a waiting queue is normally indicated as connected as ...
... correct display message in case that the call is declined Yes. Inclusive call back request. ---- SOAP Call works? Yes, with WH1_v4.1.12.pkg ---- Device supports display updates during call ... Yes ---- Device has programmable function keys Yes ---- Device has partner keys No CTI Features (with SOAP / TAPI / myPBX) border="1" Tested feature Result ---- User Call - outgoing call OK ---- User Connect - Answer ...
... the Media interface on a different system in the public network. Operator connect for SOAP On the SOAP/TAPI interface a call to a waiting queue is normally indicated as connected as ...
... /bin/sh Install needed PHP 7 Modules.
apt-get install php7.0-soap php7.0-pgsql php7.0-curl Update php.ini.
sed -i 's ... = \".:\/usr\/share\/php:\/var\/www\/innovaphone\"/' /etc/php/7.0/cli/php.ini echo "extension=soap" >> /etc/php/7.0/cli/php.ini Apply unoconv patch which comes with latest ...
... the Media interface on a different system in the public network. Operator connect for SOAP On the SOAP/TAPI interface a call to a waiting queue is normally indicated as connected as ...
... newer versions and/or devices on test/license mode. This Interfaces are used mainly for SOAP applications be able to perform calls via the Gateway (ex: For automated call tests). Conferencing ... Reference:Remote Control Facility innovaphone remote control facility can be sent e.g. by a SOAP application. These remote controls are available: 0: ''Connect'' 24: ''Receive on'' 25: ''Receive off'' 26 ...
... Executive object:”. Note: in the list should just be agent long names, no Queue or SOAP name or similar. If the user is fine but not in the group the agent ... : After all the initializing stuff the iQM require some seconds to establish a fully operating SOAP connections and if that is up the message “running session xx on queue yyyy” is ...
... the Media interface on a different system in the public network. Operator connect for SOAP On the SOAP/TAPI interface a call to a waiting queue is normally indicated as connected as ...
... , conference view, board monitor, Dashboard, call center monitor, board client --> Applies To iQM is a SOAP application and communicate with the innovaphone PBX. The PBX-Queue Monitor runs on a PC ... xxxx is the ip-address of the PBX, all other indicated parameter are given for SOAP sessions. A connection between iQM and PBX could be down for many reasons, for example ...
... instruction. Image:jtel_ivr.png Competitive Analysis Deep integration into Innovaphone pbx via SIP and SOAP-interface Integration of all channels Very simple to use Grafical Workflow-Editor Quick deployment = less ... Web-RTC Very simple backend-integration e.g. CRM, ERP via modern interfaces such as SOAP, REST etc. Pbx-independent, supporting all pbx’s Pricing Jtel offers a very simple and ...
... instantly and have a self-talk ;-) ; User objects ''_TAPI_'' and ''SOAP'' : they can be used to to monitor users with SOAP or TAPI Scheduled Reset The device configuration will be reset to ...
... newer versions and/or devices on test/license mode. This Interfaces are used mainly for SOAP applications be able to perform calls via the Gateway (ex: For automated call tests). Conferencing ... Reference:Remote Control Facility innovaphone remote control facility can be sent e.g. by a SOAP application. These remote controls are available: 0: ''Connect'' 24: ''Receive on'' 25: ''Receive off'' 26 ...

Result Page:   Previous  2  3  4  5  6  7  8 
match any word match all words

Search in namespaces:

















































































Powered by Sphinx
Views
Personal tools