Reference11r2:Release Notes Firmware

From innovaphone wiki
Revision as of 00:40, 12 May 2015 by Meta-reporter (talk | contribs) (regular roadmap update)
Jump to navigation Jump to search
There are also other versions of this article available: Reference | Reference8 | Reference9 | Reference10 | Reference11r1 | Reference11r2 (this version) | Reference12r1 | Reference12r2 | Reference13r1 | Reference13r2 | Reference13r3 | Reference14r1 | Reference14r2

This is the Firmware 11r2 Roadmap Document.

Service Releases are planned for the second monday each month.

This article is generated automatically. Do not edit! Please see the disclaimer before using the information presented here!


11r2 Service Release 1

Changes included in Version 11r2 Service Release 1 Definition


IP232/222/111: Partner fkey did not display icon as it did on old phones

Status Closed
Id 144957

Partner fkey did not display icon as it did on old phones.
On old phones a partner fkey displays:
- bell-icon while partner is ringing (pickup is possible)
- handset-icon while partner is connected or calling (pickup is not possible)

SIP: PBX sends re-INVITE after REFER was handled

Status Closed
Id 145005

PBX sends re-INVITE after REFER was handled.
Client expects to receive nothing but NOTIFY(sip-frag) or BYE from PBX.

Gateway: Mapping of diverted number did not work, if a calling number was mapped as well

Status To-decide
Id 145035

Some digits could be duplicated.

myPBX Hotkey: Use Windows Automation and STRG-C instead of WM_COPY

Status Closed
Id 145040

IP232/222/111: Warning symbol was displayed if phone was connected to switch via PC port

Status Closed
Id 145045

Warning symbol ("LINK-DOWN") was displayed if phone was connected to switch via PC port.
Although the phone was registered and working.

SIP: Adjust offered framesize in media offers on media-relay interfaces

Status Closed
Id 145079

Adjust offered framesize in media offers on media-relay interfaces.
Until now the original offered framesize was passed through.

Status: Fixed in 10.00, 11.00, 11r2, 12r1

PBX: No CLIR for internal calls, did not work for Pickup

Status To-decide
Id 145138

The dialog-info/group-indication did not show the number

myPBX Hotkey: Re-register if main window handle changes

Status Closed
Id 145146

Under some circumstances the window handle can change during runtime. If that happens the launcher has to re-register for some window messages.

myPBX: Remove fish from notification window

Status Closed
Id 145149

The fish in myPBX was replaced in 11r2 with the new myPBX logo. But in the notification windows there was still the fish. Not it is removed.

Fill missing bits with zeros in encode_base64

Status Closed
Id 145266

Additionally, an array boundary has been violated.

Status Closed
Id 145273

The claim was changed from "PURE IP-COMMUNICATIONS" to "PURE IP COMMUNICATIONS".

DHCP-Client:: a changed "IP Routing" option propagated via the server "Renew" button had no effect at the client

Status To-decide
Id 145284

Video/Collaboration: ICE compatibility between v11 and v11r2

Status Closed
Id 145299

hmac_sha1 was calculated different in v11.

myPBX Hotkey: Use ClipboardFormatListener instead of ClipboardViewer

Status Closed
Id 145316

Use a different windows API that is more robust.

phone: DTMF tones received from remote were not played locally

Status To-decide
Id 145347

Trap when restart is initiated

Status To-decide
Id 145368

Trap in SIP stack when restart is initiated.

PBX SOAP: 6s timeout to pickup receiver if call is initiated for analog phone

Status To-decide
Id 145387

When a call is initiated for an anlog phone with SOAP, or any other phone, which cannot be made to accept a call atomatically, first a call rings at this phone. After accepting this call, the outgoing call is initaited. There was a timeout of 6s to accept this call. It is now increased to 60s

LDAP: Trap in Flash Directory UI

Status Closed
Id 145405

A deleted memory region was re-accessed.

PBX: Connected number was not adjusted after SOAP pickup

Status To-decide
Id 145427

The call looked as if connected to the original called number

IP232/222/111: Silent Monitoring did not work

Status Closed
Id 145444

Silent Monitoring could not be started.

SIP: Problem with failover on failed call attempt

Status Closed
Id 145489

Problem with failover on failed call attempt.

PBX Wakeup Call: If Waiting was used for announcement, a restart happened if the call was rejected by the user

Status To-decide
Id 145490

This trap could also happen with other object types

PBX Executive: WebRTC could not be configured for executive object

Status To-decide
Id 145535

Should be the same as normal user

IP-DECT: Phone book search filter

Status Closed
Id 145556

The configured phone book search filter isn't considered in the search string. This is fixed now.

145308: IP232/222/111: Block dialing calls should be marked as 'sending complete'

Status Closed
Id 145583

Calls stared with enbloc dialing should be marked as 'sending complete'.

PBX: Forward received UUI on forwarded call, after CFB or CFNR

Status To-decide
Id 145584

Needed for some special applications only

IP232/222/111: Bug in Executive/Secretary scenario

Status To-decide
Id 145749

Bug in Executive/Secretary scenario.
Executive's phone show wrong presence information, when a secretary joins or leaves the group of secretaries.

Trap in conjunction with call completion

Status Closed
Id 145767

The new test cases in test/11.00/phone_android/phone-app-ip2x2 revealed this bug. To reproduce carry out these steps:
- Start an outgoing call.
- When ringing press the call completion button
- Press "Send Message"
- Send the message, click hangup.
- Go to the phone screen, change to the diversion settings and back.

Retrieved from "https://wiki.innovaphone.com/index.php?title=Reference11r2:Release_Notes_Firmware&oldid=37756"