View source for Howto:X2COM SIM-2-SIP Testreport

==Summary==

The X2COM SIM-2-SIP is based on a SIM card in a regular GSM or Smartphone.
The provider provides a service where this SIM card connects via the mobile network to a SBC in the providers network.
This SBC has a SIP agent that registers to the PBX.
This way, the GSM/Smartphone acts like a regular SIP Phone.

==Certification Status==

{{Template:Compat Status "tested"}}
<!-- {{Template:Compat Status "in progress"}}-->
<!-- {{Template:Compat Status "in progress"}}-->
<!-- {{Template:Compat Status "tested"}}-->
<!-- {{Template:Compat Status "rejected"}} -->

Testing of this product is in progress.

==Version==
Firmware Version:
* NA  or ask provider X2COM

innovaphone Firmware:
* V15
* V14

== Test Setup ==
[[Image:Testreport_Terminals_SIP_1.PNG]]

==Device Setup==

{| border="1"
!Tested feature
!Result
|----
|Register Device w/o specific configuration (requires DHCP)
|  
|----
|DHCP is default
|    
|----
|DHCP yields timeserver and time displays correctly
|  
|----
|SNTP config has TZ string for timezone/dst autoconfig
|  
|----
|DHCP yields correct default gateway
|    
|----
|Device supports magic registration (e.g. by serial)
|  
|----
|Fixed registrations works
|    
|----
|Device registers w/o Extension (just by name)
|    
|----
|Device registers by name with non-latin1 characters (e.g. UserÄÖÜ)
|    
|----
|Device registers by extension
|    
|----
|Device registers with password
|Yes    
|----
|Device registers multiple identities
|    
|----
|2nd GK is supported
|
|----
|Device supports Redirection of Registration (Master redirects to Slave)
|  
|----
|Device supports STUN protocol
|    
|----
|Device sends NAT - keepalive messages
|    
|----
|Device refreshes the PBX registration
|    
|----
|Device supports SIP over TCP
| 


Media Relay needs to be ticked at the Hardware ID of the User Object where the Device is registered.
|----
|Device supports SRTP
| 
|----
|Device supports SIPS (SIP over TLS)
|
|----
|Device supports HTTPS
|NA
|----
|Device supports VAD (Voice activity detection)
|
|----
|Supported menu languages
|many, check manufacturor phone
|----
|3-party conference
|Yes
|}

==Test Results==

=== Basic Call ===

{| border="1"
!Tested feature
!Result with MR
|----
|call using g711a
|
|----
|call using g711u
|    
|----
|call using g729
|    
|----
|call using g722
|    
|----
|Overlapped sending
|
|----
|Device sets up an early media channel for incoming calls
|
|----
|Device sets up an early media channel for outgoing calls
|    
|----
|Device shows called id number
|    
|----
|Device shows called id name
|    
|----
|Device shows called id display info
|    
|----
|Fax using T.38
|N/A
|----
|CGPN can be suppressed
|    
|----
|Reverse Media Negotiation
|    
|----
|Device shows CDPN/CGPN on incoming call
|    
|----
|Device shows CDPN/CGPN on outgoing call
|    
|----
|Device shows connected number
|
|----
|Device shows diverting number
|
|----
|Device supports distinctive ringing
|    
|----
|Device supports asymetric codec negotiation
|
|----
|Device supports codec renegotiation during a conversation
|    
|----
|Device shows correct display message in case of busy CDPN
|    
|----
|Device shows correct display message in case of not existing CDPN
|
|----
|Device shows correct display message in case that the call is declined
|    
|----
|3party conference possible
|Yes
|----
|Device supports display updates during call(needed for Directory Search object)
|
|----
|Long Time Call (>30 min) works?
|    
|----
|Incoming SRTP call - SRTP not enabled on DUT
|    
|----
|Incoming SRTP call - SRTP enabled on DUT
|Not tested, 
|----
|Voice Quality OK?
|Yes
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|DTMF tones sent correctly
|
|----
|DTMF tones received correctly
|
|}

=== Hold/Retrieve ===

{| border="1" 
!Tested feature
!Result 
|----
|Device handles incoming hold correctly
|    
|----
|Device can put a call on hold using correctly(inactive or sendonly)
|    
|}

=== Transfer with consultation ===

{| border="1" 
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|    
|    
|----
||inno1 calls inno2. inno1 transfers to testphone.
|    
|    
|----
|inno1 calls testphone. inno1 transfers to inno2.
|    
|    
|----
|inno1 calls testphone. testphone transfers to inno2.
|    
|    
|----
|testphone calls inno1. inno1 transfers to inno2.
|    
|    
|----
|testphone calls inno1. testphone transfers to inno2.
|    
|    
|}

=== Transfer without consultation (alerting only) ===

{| border="1" 
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|    
|    
|----
||inno1 calls inno2. inno1 transfers to testphone.
|    
|    
|----
|inno1 calls testphone. inno1 transfers to inno2.
|    
|    
|----
|inno1 calls testphone. testphone transfers to inno2.
|    
|    
|----
|testphone calls inno1. inno1 transfers to inno2.
|    
|    
|----
|testphone calls inno1. testphone transfers to inno2.
|    
|    
|}

=== Blind Transfer ===

{| border="1" 
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|    
|----
|inno1 calls inno2. inno1 transfers to testphone.
|    
|----
|inno1 calls testphone. inno1 transfers to inno2.
|    
|----
|inno1 calls testphone. testphone transfers to inno2.
|
|----
|testphone calls inno1. inno1 transfers to inno2.
|    
|----
|testphone calls inno1. testphone transfers to inno2.
|
|}

=== Blind Transfer (alerting only)===

{| border="1" 
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|    
|----
|inno1 calls testphone. testphone transfers to inno2.
|
|----
|testphone calls inno1. inno1 transfers to inno2.
|    
|}

=== Broadcast Group & Waiting Queue ===

{| border="1" 
!Tested feature
!Result 
|----
|testphone makes call to a Broadcast Group. inno1 picks up.
|    
|----
|inno1 makes call to a Broadcast Group. testphone picks up.
|    
|----
|testphone makes call to a Waiting Queue. inno1 picks up before announcement is played.
|    
|----
|testphone makes call to a Waiting Queue. inno1 picks up after announcement is played.
|    
|----
|inno1 makes call to a Waiting Queue. testphone picks up.
|    
|}

=== DTMF Features ===

{| border="1"
!Tested feature
!Result
|----
|CFU Activate/Deactivate            
|
|----
|CFB Activate/Deactivate        
|
|----
|CFNR Activate/Deactivate        
|
|----
|Pickup Group
|
|----
|Pickup Directed        
|
|----
|Park/Unpark        
|
|----
|Park To/Unpark From        
|
|----
|Call Completion Busy
|
|----
|Call Completion Cancel
|
|----
|Join Group/Leave Group
|
|----
|Join All Groups/Leave All Groups
|
|----
|Enable mobility/Disable mobility        
|
|----
|Enable mobility cw/Disable mobility cw        
|
|----
|Set presence
|
|}

==Other Features==

===Directory===

{| border="1"
!Tested feature
!Result
|----
|Device built-in directory
|----
|Exists
|    
|----
|Can be dialled from
|    
|----
|Does CLI resolution
|    
|----
|display update if directory object is used?
|    
|}

*It is possible to configure a connection to an online source like DE - Klicktel. Please take a look into the manual or configuration.
*It is possible to import and export the local Phonebook.
*You can add the call to the local phonebook from the call-list.


{| border="1"
!Tested feature
!Result
|----
|External LDAP Server supported
|
|----
|Can be dialled from
|    
|----
|Does CLI resolution
|    
|----
|display update if directory object is used?
|    
|}

===Keys===

{| border="1"
!Tested feature
!Result
|----
|Device has speed dial keys
|Yes, depending on handset
|----
|Device has programmable function keys
|Yes, depending on handset
|----
|Device has partner keys
|No
|}

===CTI Features (with SOAP / TAPI / myApps) ===

{| border="1"
!Tested feature
!Result
|----
|User Call - outgoing call
|
|----
|User Connect - Answer incoming call
|
|----
|User Reject - Reject alerting call
|
|----
|User Disconnect - Disconnect active call
|
|----
|User Hold - Put connected call on hold
|
|----
|User Hold Retrieve - Retrieve call on hold
|
|----
|User Transfer - Transfer with Consult
|
|----
|User Transfer - Transfer with Consult (Alerting only)
|
|----
|User Transfer - Blind Transfer
|
|----
|3PTY - Make 3rd Party Call
| 
|----
|Connected Number Update on Display
|
|}

* tested with myPBX and TSP(8150)only

== Configuration ==

=== innovaphone configuration ===
Add a new PBX object of type "user":<br>
[[Image:X2COM-PBX_Userobject.png]]

=== 3rd party product configuration ===

====Provider Configuration====

Send following information to the Provider for login on the PBX_Userobject

* Domain: yourdomain.com
* SIP server: yourserver.com
* SIP Proxy:  yourproxy.com
* Username:  X2COMsimSIPusername
* Password:  your users password or PBX password
* Protocol Transport:  TCP  port 5060 (don't use UDP with reverse proxy)
* ICE (check for support)



====Telephony Connection====


====Number Assignment====


====Voicemail====


====Phone Directory - Adress Book====


====Enhanced VoIP Settings====


=== Known problems ===


==== MoH ====
Need to test

 http://ip-of-pbx/!config add SIP /take-sendonly-as-inactive
 http://ip-of-pbx/!config write
 http://ip-of-pbx/!config activate

Please keep in mind that this option will affect all SIP/UDP communication. So if you have for example another 3rd party SIP-device, which wants to play its own MOH - it will not work anymore.

==== Usernames with whitespace ====

==== Recalling device after transfer ====


==== innovaphone PBX Version 13 and Chat App ====
When using myApps to send chat messages to a user, the PBX broadcasts the IM-SETUP (instant-message) to all registered endpoints of the addressed user.

[[Category:Compat|{{PAGENAME}}]]