Howto:Skype Connect - SIP Testreport: Difference between revisions

From innovaphone wiki
Jump to navigation Jump to search
← Older edit
VisualWikitext
 
(61 intermediate revisions by 3 users not shown)
Line 5: Line 5:
'''SIP Provider: Skype'''
'''SIP Provider: Skype'''


<!--
* The mandatory feature '''Early Media''' is not supported by Skype Connect, the provider never sends any Session Progress message to the PBX before call establishment.
The provider supports all required innovaphone features and is therefore qualified as [[Howto:What_is_a_%22recommended_product%22%3F#SIP_Provider|recommended SIP Provider]].  
* Skype connect rejects calls with Diverting-info, special configuration is required<ref name="div">It is necessary to enable the ''Set Calling=Diverting No'' option on the ''Trunk Line'' object. If not, a diverted call is rejected by the provider with ''SIP 403 Forbidden'' because it contains ''Diverting Info''.</ref>.




...
*Caller identification using your Skype Number is available in:


That being said, the provider has achieved x% of all possible test points. For more information on the test rating, please refer to [[Howto:SIP_Interop_Test_Description#Summary|Test Description]]
**USA
**UK
**Chile
**Denmark
**Estonia
**Hong Kong
**Poland
**Sweden


* Features:
*As alternative we could verify a landline number using the ''Verify Procedure'' of Skype or use a mobile phone as Caller ID. However even these verified numbers are only available for limited countries.


** Direct Dial In
** Fax over IP (T.38)
** DTMF
* Supported Codecs by the provider
** G711
** G729
** G723
** G726
** T.38 UDP
-->
== Current test state ==
== Current test state ==


<!--{{Template:Compat Status "planned"}} -->
<!--{{Template:Compat Status "planned"}} -->
{{Template:Compat Status "in progress"}}
<!--{{Template:Compat Status "in progress"}}-->
<!-- {{Template:Compat_Status_"referral_prod."|certificate=Tpl_sip.business_Toplink_SIP_Provider_-_product-cert.pdf}} -->
<!-- {{Template:Compat_Status_"referral_prod."|certificate=Tpl_sip.business_Toplink_SIP_Provider_-_product-cert.pdf}} -->
<!-- {{Template:Compat_Status_"engineered_prod."|certificate=Tpl_sip.business_Toplink_SIP_Provider_-_product-cert.pdf}} -->
<!-- {{Template:Compat_Status_"engineered_prod."|certificate=Tpl_sip.business_Toplink_SIP_Provider_-_product-cert.pdf}} -->
<!-- {{Template:Compat_Status_"rec._prod."|certificate=Tpl_sip.business_Toplink_SIP_Provider_-_product-cert.pdf}} -->
<!-- {{Template:Compat_Status_"rec._prod."|certificate=Tpl_sip.business_Toplink_SIP_Provider_-_product-cert.pdf}} -->
<!-- {{Template:Compat Status "tested"(sip provider)}} -->
<!-- {{Template:Compat Status "tested"(sip provider)}} -->
<!-- {{Template:Compat Status "rejected"}} -->
{{Template:Compat Status "rejected"}}
<!-- {{Template:Compat_Status_"referral_prod."-no-certificate}} -->
<!-- {{Template:Compat_Status_"referral_prod."-no-certificate}} -->


<!-- Testing of this product has been finalized January 1st, 1970. -->
Testing of this product has been finalized December 20th, 2012.


== Testing Enviroment ==
== Testing Enviroment ==
Line 46: Line 41:
This scenario describes a setup where the PBX and phones are in a private network.  
This scenario describes a setup where the PBX and phones are in a private network.  


* the SIP trunk is configured without Media Relay and without exclusive coder. This is the case if all tests were successful
* the SIP trunk is configured without Media Relay and without exclusive coder.


== Test Results ==
== Test Results ==


For more information on the test procedure, please read the following wiki article: [[Howto:SIP_Interop_Test_Description|SIP Interop Test Description]]. Bold lines in the test results indicate a KO-criteria.
For more information on the test procedure, please read the following wiki article: [[Howto:SIP_Interop_Test_Description|SIP Interop Test Description]]. Bold lines in the test results indicate a KO-criteria.
{{FIXME|reason=Note: Possible test results are Ok, Nok, Not tested, N/A(not available). Ok, Nok, N/A are self explanatory. "Not tested" is more a temporary note - if its still in the test after finishing, then the summary should explain why the feature was not tested. Remove this note in the final report}}


=== Basic Call ===
=== Basic Call ===
Line 79: Line 72:
|----
|----
|'''early media channel'''
|'''early media channel'''
|Could not be tested, calls to unknown numbers are not signalled correctly at calling phone. No SDP in 18x messages, therefore NOK
|'''NOK''', no SDP in 18x messages.
|----
|----
|Fax using T.38
|Fax using T.38
Line 94: Line 87:
|----
|----
|'''Long time call possible(>30 min)'''
|'''Long time call possible(>30 min)'''
|OK
|'''OK'''
|----
|----
|'''External Transfer'''
|'''External Transfer'''
|Not tested
|'''OK'''
|----
|----
|NAT Detection
|NAT Detection
Line 125: Line 118:
|----
|----
|'''Outbound(Innovaphone -> Provider)'''
|'''Outbound(Innovaphone -> Provider)'''
|NT
|'''OK'''
|}
|}


Line 135: Line 128:
|----
|----
|'''DTMF tones sent correctly'''
|'''DTMF tones sent correctly'''
|Nok via RFC-2833, only inband in RTP-Stream
|'''OK'''
|----
|----
|DTMF tones sent correctly via SIP-Info
|DTMF tones sent correctly via SIP-Info
|Nok
|NOK
|----
|----
|'''DTMF tones received correctly'''
|'''DTMF tones received correctly'''
|Not tested
|'''OK'''
|}
|}


Line 151: Line 144:
|----
|----
|'''Call can be put on hold'''  
|'''Call can be put on hold'''  
|'''Ok'''  
|'''OK'''  
|----
|----
|Held end hears music on hold / announcement from PBX
|Held end hears music on hold / announcement from PBX
|Ok
|OK
|}
|}


Line 164: Line 157:
|----
|----
|'''Call can be transferred'''
|'''Call can be transferred'''
|Ok, only with mediarelay. Without mediarelay no audio after transfer.
|'''OK'''
|----
|----
|Held end hears music on hold
|Held end hears music on hold
|Ok
|OK
|}
|}


Line 178: Line 171:
|----
|----
|inno1 calls inno2. inno2 transfers to sip-provider-phone.
|inno1 calls inno2. inno2 transfers to sip-provider-phone.
|
|OK
|
|OK
|----
|----
|inno1 calls sip-provider-phone. inno1 transfers to inno2.
|inno1 calls sip-provider-phone. inno1 transfers to inno2.
|
|OK
|
|OK
|----
|----
|inno1 calls sip-provider-phone. sip-provider-phone transfers to inno2.
|inno1 calls sip-provider-phone. sip-provider-phone transfers to inno2.
|
|OK
|
|OK
|----
|----
|sip-provider-phone calls inno1. inno1 transfers to inno2.
|sip-provider-phone calls inno1. inno1 transfers to inno2.
|
|OK
|
|OK
|----
|----
|sip-provider-phone calls inno1. sip-provider-phone transfers to inno2.
|sip-provider-phone calls inno1. sip-provider-phone transfers to inno2.
|
|OK
|
|OK
|}
|}


Line 205: Line 198:
|----
|----
|'''Call can be transferred'''
|'''Call can be transferred'''
|
|'''OK'''
|----
|----
|Held end hears music on hold or dialling tone
|Held end hears music on hold or dialling tone
|
|OK
|----
|----
|'''Call returns to transferring device if the third'''  
|'''Call returns to transferring device if the third'''  
'''Endpoint is not available'''
'''Endpoint is not available'''
|
|'''OK'''
|}
|}


Line 223: Line 216:
|----
|----
|inno1 calls inno2. inno2 transfers to sip-provider-phone.
|inno1 calls inno2. inno2 transfers to sip-provider-phone.
|
|OK
|
|OK
|----
|----
|inno1 calls sip-provider-phone. inno1 transfers to inno2.
|inno1 calls sip-provider-phone. inno1 transfers to inno2.
|
|OK
|
|OK
|----
|----
|inno1 calls sip-provider-phone. sip-provider-phone transfers to inno2.
|inno1 calls sip-provider-phone. sip-provider-phone transfers to inno2.
|
|OK
|
|OK
|----
|----
|sip-provider-phone calls inno1. inno1 transfers to inno2.
|sip-provider-phone calls inno1. inno1 transfers to inno2.
|
|OK
|
|OK
|----
|----
|sip-provider-phone calls inno1. sip-provider-phone transfers to inno2.
|sip-provider-phone calls inno1. sip-provider-phone transfers to inno2.
|
|OK
|
|OK
|}
|}


Line 250: Line 243:
|----
|----
|Call can be transferred
|Call can be transferred
|
|OK
|----
|----
|Held end hears dialling tone
|Held end hears dialling tone
|
|OK
|}
|}


Line 263: Line 256:
|----
|----
|inno1 calls inno2. inno2 transfers to sip-provider-phone.
|inno1 calls inno2. inno2 transfers to sip-provider-phone.
|
|OK
|----
|----
|inno1 calls sip-provider-phone. inno1 transfers to inno2.
|inno1 calls sip-provider-phone. inno1 transfers to inno2.
|
|OK
|----
|----
|inno1 calls sip-provider-phone. sip-provider-phone transfers to inno2.
|inno1 calls sip-provider-phone. sip-provider-phone transfers to inno2.
|
|OK
|----
|----
|sip-provider-phone calls inno1. inno1 transfers to inno2.
|sip-provider-phone calls inno1. inno1 transfers to inno2.
|
|OK
|----
|----
|sip-provider-phone calls inno1. sip-provider-phone transfers to inno2.
|sip-provider-phone calls inno1. sip-provider-phone transfers to inno2.
|
|OK
|}
 
=== CFU/ CFB Transfer ===
 
{| border="1"
!Tested feature
!Result
|----
|'''Call can be forward'''
|'''OK''' <ref name='div'/>
|----
|'''Held end hears dialling tone'''
|'''OK'''
|}
|}


=== Blind Transfer (alerting only)===
 
 
=== CFNR/Blind Transfer (alerting only)===


{| border="1"  
{| border="1"  
Line 284: Line 292:
!Result  
!Result  
|----
|----
|Call can be transferred
|'''Call can be transferred or forward'''
|
|'''OK''' <ref name='div'/>
|----
|----
|Held end hears dialling tone
|'''Held end hears dialling tone'''
|
|'''OK'''
|}
|}


The following tests are made to test if call transfer is working.
The following tests are made to test if call transfer is working.
Line 298: Line 308:
|----
|----
|inno1 calls inno2. inno2 transfers to sip-provider-phone.
|inno1 calls inno2. inno2 transfers to sip-provider-phone.
|
|OK
|----
|----
|inno1 calls sip-provider-phone. sip-provider-phone transfers to inno2.
|inno1 calls sip-provider-phone. sip-provider-phone transfers to inno2.
|
|OK
|----
|----
|sip-provider-phone calls inno1. inno1 transfers to inno2.
|sip-provider-phone calls inno1. inno1 transfers to inno2.
|
|OK
|}
|}


Line 314: Line 324:
|----
|----
|'''Caller can make a call to a Broadcast Group'''
|'''Caller can make a call to a Broadcast Group'''
|
|'''OK'''
|----
|----
|'''Caller can make a call to a Waiting Queue'''
|'''Caller can make a call to a Waiting Queue'''
|
|'''OK'''
|----
|----
|'''Announcement if nobody picks up the call'''
|'''Announcement if nobody picks up the call'''
|
|'''OK'''
|}
|}


Line 327: Line 337:
===Firmware version===
===Firmware version===


All innovaphone devices use Vx build xx-xxxxx as firmware.
All innovaphone devices use V9 hf19 as firmware.


=== SIP - Trunk ===
=== SIP - Trunk ===


[[Image:Skype_Connect_-_SIP_Testreport_1.png]]


=== Number Mapping ===
=== Number Mapping ===


[[Image:Skype_Connect_-_SIP_Testreport_2.png]]
The Skype ''Caller ID'' for outgoing calls is defined on the ''Skype Manager'' page. For this reason, we don't define any ''CGPN Out'' value.


=== Route Settings ===
=== Route Settings ===


[[Image:Skype_Connect_-_SIP_Testreport_3.png]]
You must set the ''Force enblock'' (b) option on the route for outgoing calls.


=== Media Relay ===
== Known Issues ==


[[Image:Skype_Connect_-_SIP_Testreport_4.png]]<ref name="div"/>


=== Fax ===
<references/>


[[Category:Compat|{{PAGENAME}}]]
[[Category:Compat|{{PAGENAME}}]]

Latest revision as of 10:23, 13 February 2018

Innovaphone Compatibility Test Report

Summary

SIP Provider: Skype

  • The mandatory feature Early Media is not supported by Skype Connect, the provider never sends any Session Progress message to the PBX before call establishment.
  • Skype connect rejects calls with Diverting-info, special configuration is required[1].


  • Caller identification using your Skype Number is available in:
    • USA
    • UK
    • Chile
    • Denmark
    • Estonia
    • Hong Kong
    • Poland
    • Sweden
  • As alternative we could verify a landline number using the Verify Procedure of Skype or use a mobile phone as Caller ID. However even these verified numbers are only available for limited countries.

Current test state

The tests for this product could not be completed or not all mandatory tests were passed. See the Summary section for more details.

Testing of this product has been finalized December 20th, 2012.

Testing Enviroment

This scenario describes a setup where the PBX and phones are in a private network.

  • the SIP trunk is configured without Media Relay and without exclusive coder.

Test Results

For more information on the test procedure, please read the following wiki article: SIP Interop Test Description. Bold lines in the test results indicate a KO-criteria.

Basic Call

Tested feature Result
call using g711a OK
call using g711u OK
call using g723 NOK
call using g729 OK
call using g722 NOK
Overlapped sending NOK
early media channel NOK, no SDP in 18x messages.
Fax using T.38 Not supported as written on product description, not tested
Reverse Media Negotiation OK
CGPN can be suppressed OK
CLIP no screening NOK
Long time call possible(>30 min) OK
External Transfer OK
NAT Detection OK
Redundancy Not tested
SIP over TCP NOK, no _tcp serv ice record in skype.com domain
Voice Quality OK? OK

Direct Dial In

Tested feature Result
Inbound(Provider -> Innovaphone via SkypeIn Number) OK
Inbound(Provider -> Innovaphone via Skype User) OK
Outbound(Innovaphone -> Provider) OK

DTMF

Tested feature Result
DTMF tones sent correctly OK
DTMF tones sent correctly via SIP-Info NOK
DTMF tones received correctly OK

Hold/Retrieve

Tested feature Result
Call can be put on hold OK
Held end hears music on hold / announcement from PBX OK

Transfer with consultation

Tested feature Result
Call can be transferred OK
Held end hears music on hold OK

The following tests are made to test if call transfer is working.

Tested feature Voice Ok? MoH Ok?
inno1 calls inno2. inno2 transfers to sip-provider-phone. OK OK
inno1 calls sip-provider-phone. inno1 transfers to inno2. OK OK
inno1 calls sip-provider-phone. sip-provider-phone transfers to inno2. OK OK
sip-provider-phone calls inno1. inno1 transfers to inno2. OK OK
sip-provider-phone calls inno1. sip-provider-phone transfers to inno2. OK OK

Transfer with consultation (alerting only)

Tested feature Result
Call can be transferred OK
Held end hears music on hold or dialling tone OK
Call returns to transferring device if the third

Endpoint is not available

OK

The following tests are made to test if call transfer is working.

Tested feature Voice Ok? MoH Ok?
inno1 calls inno2. inno2 transfers to sip-provider-phone. OK OK
inno1 calls sip-provider-phone. inno1 transfers to inno2. OK OK
inno1 calls sip-provider-phone. sip-provider-phone transfers to inno2. OK OK
sip-provider-phone calls inno1. inno1 transfers to inno2. OK OK
sip-provider-phone calls inno1. sip-provider-phone transfers to inno2. OK OK

Blind Transfer

Tested feature Result
Call can be transferred OK
Held end hears dialling tone OK

The following tests are made to test if call transfer is working.

Tested feature Voice Ok?
inno1 calls inno2. inno2 transfers to sip-provider-phone. OK
inno1 calls sip-provider-phone. inno1 transfers to inno2. OK
inno1 calls sip-provider-phone. sip-provider-phone transfers to inno2. OK
sip-provider-phone calls inno1. inno1 transfers to inno2. OK
sip-provider-phone calls inno1. sip-provider-phone transfers to inno2. OK

CFU/ CFB Transfer

Tested feature Result
Call can be forward OK [1]
Held end hears dialling tone OK


CFNR/Blind Transfer (alerting only)

Tested feature Result
Call can be transferred or forward OK [1]
Held end hears dialling tone OK


The following tests are made to test if call transfer is working.

Tested feature Voice Ok?
inno1 calls inno2. inno2 transfers to sip-provider-phone. OK
inno1 calls sip-provider-phone. sip-provider-phone transfers to inno2. OK
sip-provider-phone calls inno1. inno1 transfers to inno2. OK

Broadcast Group & Waiting Queue

Tested feature Result
Caller can make a call to a Broadcast Group OK
Caller can make a call to a Waiting Queue OK
Announcement if nobody picks up the call OK

Configuration

Firmware version

All innovaphone devices use V9 hf19 as firmware.

SIP - Trunk

Number Mapping

The Skype Caller ID for outgoing calls is defined on the Skype Manager page. For this reason, we don't define any CGPN Out value.

Route Settings

You must set the Force enblock (b) option on the route for outgoing calls.

Known Issues

[1]

  1. ↑ 1.0 1.1 1.2 1.3 It is necessary to enable the Set Calling=Diverting No option on the Trunk Line object. If not, a diverted call is rejected by the provider with SIP 403 Forbidden because it contains Diverting Info.
Retrieved from "https://wiki.innovaphone.com/index.php?title=Howto:Skype_Connect_-_SIP_Testreport&oldid=49145"