Reference9:Services/SNMP: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
mNo edit summary |
||
(2 intermediate revisions by 2 users not shown) | |||
Line 1: | Line 1: | ||
The VoIP device allows the operating state to be monitored using '''SNMP''' (Simple Network Management Protocol with version 1.0). Standard MIB II and a manufacturer-specific MIB (Management Information Base) are supported. Detailed information about this MIB can be obtained from a certified innovaphone dealer or | The VoIP device allows the operating state to be monitored using '''SNMP''' (Simple Network Management Protocol with version 1.0). Standard MIB II and a manufacturer-specific MIB (Management Information Base) are supported. Detailed information about this MIB can be obtained from a certified innovaphone dealer or as [http://download.innovaphone.com/ice/download/p/6.00/apps/6000063%20(Voice%20Mail,%20TAPI,%20SoftwarePhone,%20Operator%20final)/tools.zip zip-package] from the download area of the innovaphone homepage. File name: INNO-MIB-V7.TXT. | ||
innovaphone uses the standard Ports for SNMP, UDP Port 161 and UDP Port 162 for SNMP traps, and they are not changeable. | innovaphone uses the standard Ports for SNMP, UDP Port 161 and UDP Port 162 for SNMP traps, and they are not changeable. |
Latest revision as of 12:38, 20 December 2023
The VoIP device allows the operating state to be monitored using SNMP (Simple Network Management Protocol with version 1.0). Standard MIB II and a manufacturer-specific MIB (Management Information Base) are supported. Detailed information about this MIB can be obtained from a certified innovaphone dealer or as zip-package from the download area of the innovaphone homepage. File name: INNO-MIB-V7.TXT.
innovaphone uses the standard Ports for SNMP, UDP Port 161 and UDP Port 162 for SNMP traps, and they are not changeable.
Note: SNMP traps will not be send before an uptime of 90 seconds(will be collected in this time). Due to DHCP negotiation awaiting
Community: | If the standard community name public is not being used, a different community name can be entered in this field. |
Device Name: | For more detailed information, a device name can be specified here for the SNMP agent. |
Contact: | As can a contact person (Contact). |
Location: | As can a location (Location). |
Authentication Trap: | Access via SNMP is only possible if the correct community name is entered. If this check box is checked, a trap is generated in the case of access with an incorrect community name. |
Trap Destination: | Destinations for trap messages also have to be defined if the device is to trigger the traps defined in the manufacturer-specific innovaphone MIB. |
Allowed Networks: | To increase security, access to the device can be restricted by restricting SNMP access to a defined list of computers or IP address ranges. To disable SNMP access completely just enter 0.0.0.0 as Address and 255.255.255.255 as Mask. |
In V7 the SNMP Traps are enhanced
All events with type =Alarm are send via SNMP traps. SNMP Trap delivers: code,severity,txt (e.g interface down) and Alarm –source (e.g IP0/ETH1)
innoDiagAlarm TRAP-TYPE ENTERPRISE innovaphone VARIABLES { trapGaugeParm, -- Alarm Code trapDisplayStringParm, -- Alarm Source trapGaugeParm, -- Severity: indeterminate(0),major(1),critical(2) trapDisplayStringParm -- Alarm Text } DESCRIPTION "This trap corresponds to an alarm under Administration/Diagnostics/Alarms" ::= 6
innoDiagAlarmClear TRAP-TYPE ENTERPRISE innovaphone VARIABLES { trapGaugeParm, -- Alarm Code trapDisplayStringParm -- Alarm Source } DESCRIPTION "This trap corresponds to an alarm clearing under Administration/Diagnostics/Alarms" ::= 7