Howto:Restrictions when configuring the relay: Difference between revisions

From innovaphone wiki
Jump to navigation Jump to search
Rotodt (talk | contribs)
New page: ==Applies To== This information applies to * All innovaphone devices There are various restrictions when configuring the relay: * the total size of the config file (all that starts wit...
 
 
(3 intermediate revisions by one other user not shown)
Line 1: Line 1:
#REDIRECT [[Howto:Config_size_Limitations]]
==Applies To==
==Applies To==
This information applies to
This information applies to


* All innovaphone devices
* All innovaphone gateways




===Problem Details===
There are various restrictions when configuring the relay:
There are various restrictions when configuring the relay:


Line 11: Line 14:
* the number of words on a config line is limited
* the number of words on a config line is limited


So if there is a problem, you can try to use shorter aliases, leave out the e164 (redundant anyway) or split it into 2 GWx entries. Nevertheless, it is ugly.
So if there is a problem, you can try to use shorter aliases, shorter Descriptions or leave out the e164 (redundant anyway) or split it into several Routes or GWs.


<!-- Keywords: config line size lenght configline alias maximum number max config conf line relay maximum characters -->
<!-- Keywords: config line size lenght configline alias maximum number max config conf line relay maximum characters -->

Latest revision as of 12:14, 12 February 2018

Applies To

This information applies to

  • All innovaphone gateways


Problem Details

There are various restrictions when configuring the relay:

  • the total size of the config file (all that starts with "config change") must not exceed 29kB
  • the total line length of a config file line must not exceed 8kB
  • the number of words on a config line is limited

So if there is a problem, you can try to use shorter aliases, shorter Descriptions or leave out the e164 (redundant anyway) or split it into several Routes or GWs.