Howto:NL - MOTTO - VaMo Configuration: Difference between revisions

From innovaphone wiki
Jump to navigation Jump to search
VisualWikitext
Wh2a (talk | contribs)
19 edits
Howto register a Motto Sim card to the PBX using a Innovaphone Session Border Controller.
 
mNo edit summary
 
(19 intermediate revisions by 5 users not shown)
Line 1: Line 1:
==Product Name==
Motto Sim card


NL Motto VaMo configuration.
==Certification Status==
{{Template:Compat_Status_referral_product_new}}


This configuration if for registering a Motto Sim card to the PBX using a Innovaphone Session Border Controller.
Vendor test report and configuration hints were received Apr 26th, 2019


'''PBX configuration:'''
==Category==
Create a new user object.
<!-- by inno:
Description: Motto VaMo
  - select one or more of the available recommended product categories
Long Name: Name of the user
    a list of valid Categories can be found in
Display Name:  Name of the user
    Special Pages / Prefix Index / Display pages with prefix = RecProd, Display pages with prefix = Category
Name: (international format of the mobile number example: 31612345678)
    (you need to apply it twice, first as template {{..}}, seconds as category [[..]])
Number: (extension number for this user)
  -->
Password: (password for the SIP registration)
Hardware Id: (international format of the mobile number example: 31612345678)
PBX password: On


[[Category:3rdParty PreviousProducts|{{PAGENAME}}]]


'''Session Border Controller object setup:'''
{{3rdParty PreviousProduct}}
On he SBC create a net Session Border object for the SIM:


Long Name: Name of the user
==Description==
Password: (password for the SIP registration)
Media Relay: On


Gatekeeper Id: ID of the PBX
Integrating a normal mobile cellphone or smartphone to your PBX as a SIP-client.
Primary Adr: IP of the PBX
Name: (international format of the mobile number example: 31612345678)
PBX Password: On


Name: (extension number for this user)
==Features==
PBX Password: Off
Summary of the features:
TLS Only: Off
* Routing options available in the Flux portal:
Press OK
** Route calls to the PBX
** Route calls to mobile
** Mixed
** Scheduled


'''Set Sip config on the PBX and SBC:'''
Use the native dialer of your mobile phone for internal and/or external calls to PSTN as it is a normal internal user on the PBX.
Set this option using Maintenance, Diagnostics, Command.
!config add SIP /take-source-addr-as-contact-addr /x-ice-disabled
!config write
!config activate
reboot the PBX and SBC to be sure these options have been enabled.


'''Motto Flux portal SIM card settings:'''
==Configuration==


Device: SIM card  
This configuration is for registering a Motto Sim card to the PBX using a Innovaphone Session Border Controller.
Registration server: IP or DNS name of the Session Border Controller.
SRV option (disabled)
Port: 5060 (SIP port)
From user: (extension of the user object)


Username: (international format of the mobile number example: 31612345678)
=PBX configuration=
Password: (password of the user object)


DTMF signaling mode: auto
Create a new user object.
Description: Motto VaMo
Long Name: Name of the user
Display Name:  Name of the user
Name: (international format of the mobile number example: 31612345678)
Number: (extension number for this user)
Password: (password for the SIP registration)
Hardware Id: (international format of the mobile number example: 31612345678)
PBX password: On


Register the SIM.
[[Image:MottoVaMoUserObject.png]]
Check the registration on the SBC and PBX using the logging.


Adjust the settings on the portal to route calls to the PBX / mobile or scheduled mixed.
 
 
=Session Border Controller object setup=
 
On he SBC create a net Session Border object for the SIM:
 
Long Name: Name of the user
Password: (password for the SIP registration)
Media Relay: On
Gatekeeper Id: ID of the PBX
Primary Adr: IP of the PBX
Name: (international format of the mobile number example: 31612345678)
PBX Password: On
Name: (extension number for this user)
PBX Password: Off
TLS Only: Off
Press OK
 
[[Image:MottoVaMoSBCObject.png]]
 
 
 
=Set Sip config on the PBX and SBC=
 
Set this option using Maintenance, Diagnostics, Command.
!config add SIP /take-source-addr-as-contact-addr /x-ice-disabled
!config write
!config activate
reboot the PBX and SBC to be sure these options have been enabled.
 
[[Image:MottoVaMoPBXSetting.png]]
 
 
 
=Motto Flux portal SIM card settings=
 
Device: SIM card
Registration server: IP or DNS name of the Session Border Controller.
SRV option (disabled)
Port: 5060 (SIP port)
From user: (extension of the user object)
Username: (international format of the mobile number example: 31612345678)
Password: (password of the user object)
DTMF signaling mode: auto
 
Register the SIM.
 
Check the registration on the SBC and PBX using the logging.
 
Adjust the settings on the portal to route calls to the PBX / mobile or scheduled mixed.
 
[[Image:MottoVaMoReg.png]]
 
[[Image:MottoVaMoSetting.png]]
 
[[Image:MottoVaMoRouting.png]]
 
 
 
=Contact=
 
Aaltjan Evink
 
WH2A B.V.
 
Gildenveld 63
 
3892 DD Zeewolde
 
Flevoland, Nederland
 
Email: info@wh2a.com
 
Support: support@wh2a.com
 
Tel: +31 36 522 7879

Latest revision as of 16:13, 14 August 2025

Product Name

Motto Sim card

Certification Status

This product is listed due to a customer testimonial. No tests have been conducted by innovaphone.

Vendor test report and configuration hints were received Apr 26th, 2019

Category

This is a previously tested third-party product. The information provided here may no longer be up to date.

Use of the product in combination with current innovaphone products is at your own responsibility.

innovaphone does not offer technical support for this product. If you have any questions, please contact the third-party provider directly using the contact details provided below.

Description

Integrating a normal mobile cellphone or smartphone to your PBX as a SIP-client.

Features

Summary of the features:

  • Routing options available in the Flux portal:
    • Route calls to the PBX
    • Route calls to mobile
    • Mixed
    • Scheduled

Use the native dialer of your mobile phone for internal and/or external calls to PSTN as it is a normal internal user on the PBX.

Configuration

This configuration is for registering a Motto Sim card to the PBX using a Innovaphone Session Border Controller.

PBX configuration

Create a new user object. 

Description: 	Motto VaMo
Long Name: 	Name of the user
Display Name:   Name of the user	
Name:		(international format of the mobile number example: 31612345678)
Number:	 	(extension number for this user)
Password:	(password for the SIP registration)	
Hardware Id:	(international format of the mobile number example: 31612345678)
PBX password:	On


Session Border Controller object setup

On he SBC create a net Session Border object for the SIM: 

Long Name: 	Name of the user
Password:	(password for the SIP registration)
Media Relay: 	On
Gatekeeper Id:	ID of the PBX
Primary Adr:	IP of the PBX
Name:		(international format of the mobile number example: 31612345678)
PBX Password:	On
Name:		(extension number for this user)
PBX Password:	Off
TLS Only:	Off

Press OK


Set Sip config on the PBX and SBC

Set this option using Maintenance, Diagnostics, Command. 

!config add SIP /take-source-addr-as-contact-addr /x-ice-disabled
!config write
!config activate

reboot the PBX and SBC to be sure these options have been enabled.


Motto Flux portal SIM card settings

Device: 		SIM card 
Registration server:	IP or DNS name of the Session Border Controller.
SRV option 	 	(disabled)
Port: 			5060 (SIP port)
From user: 		(extension of the user object)
Username: 		(international format of the mobile number example: 31612345678)
Password: 		(password of the user object)
DTMF signaling mode: 	auto

Register the SIM.

Check the registration on the SBC and PBX using the logging.

Adjust the settings on the portal to route calls to the PBX / mobile or scheduled mixed.


Contact

Aaltjan Evink

WH2A B.V.

Gildenveld 63

3892 DD Zeewolde

Flevoland, Nederland

Email: info@wh2a.com

Support: support@wh2a.com

Tel: +31 36 522 7879

Retrieved from "https://wiki.innovaphone.com/index.php?title=Howto:NL_-_MOTTO_-_VaMo_Configuration&oldid=77575"