Reference7:Configuration/General/SNMP: Difference between revisions
Jump to navigation
Jump to search
mNo edit summary |
mNo edit summary |
||
Line 27: | Line 27: | ||
All events with type =Alarm are send via SNMP traps. | All events with type =Alarm are send via SNMP traps. | ||
SNMP Trap delivers: code,severity, | SNMP Trap delivers: code,severity,txt (e.g interface down) and Alarm –source (e.g IP0/ETH1) | ||
Revision as of 10:59, 14 August 2008
The VoIP device allows the operating state to be monitored using SNMP (Simple Network Management Protocol with version 1.0). Standard MIB II and a manufacturer-specific MIB (Management Information Base) are supported. Detailed information about this MIB can be obtained from a certified innovaphone dealer or downloaded directly in the download area of the innovaphone homepage. It is included in the folder "tools" together with other applications and firmware. File name: INNO-MIB.TXT (http://www.download.innovaphone.com).
Community: | If the standard community name public is not being used, a different community name can be entered in this field. |
Device Name: | For more detailed information, a device name can be specified here for the SNMP agent. |
Contact: | As can a contact person (Contact). |
Location: | As can a location (Location). |
Authentication Trap: | Access via SNMP is only possible if the correct community name is entered. If this check box is checked, a trap is generated in the case of access with an incorrect community name. |
Trap Destination: | Destinations for trap messages also have to be defined if the device is to trigger the traps defined in the manufacturer-specific innovaphone MIB. |
Allowed Networks: | To increase security, access to the device can be restricted by restricting SNMP access to a defined list of computers or IP address ranges. To disable SNMP access completely just enter 0.0.0.0 as Address and 255.255.255.255 as Mask. |
In V7 the SNMP Traps are enhanced
All events with type =Alarm are send via SNMP traps. SNMP Trap delivers: code,severity,txt (e.g interface down) and Alarm –source (e.g IP0/ETH1)
innoDiagAlarm TRAP-TYPE
ENTERPRISE innovaphone VARIABLES { trapGaugeParm, -- Alarm Code trapDisplayStringParm, -- Alarm Source trapGaugeParm, -- Severity: indeterminate(0),major(1),critical(2) trapDisplayStringParm -- Alarm Text } DESCRIPTION "This trap corresponds to an alarm under Administration/Diagnostics/Alarms" ::= 6
innoDiagAlarmClear TRAP-TYPE ENTERPRISE innovaphone VARIABLES { trapGaugeParm, -- Alarm Code trapDisplayStringParm -- Alarm Source } DESCRIPTION "This trap corresponds to an alarm clearing under Administration/Diagnostics/Alarms" ::= 7
|}