Howto:Initial Deployment of IP72: Difference between revisions
Jump to navigation
Jump to search
m (New page: * Configure the WLAN access point temporarily to match IP72's default (factory) WLAN settings. Than use the web browser to access the IP72 and change to "real" production-use WLAN config ...) |
|||
Line 1: | Line 1: | ||
* Configure the WLAN access point temporarily to match IP72's default (factory) WLAN settings. Than use the web browser to access the IP72 and change to "real" production-use WLAN config | * Configure the WLAN access point temporarily to match IP72's default (factory) WLAN settings. Than use the web browser to access the IP72 and change to "real" production-use WLAN config | ||
* Enter the WLAN configuration on the phone using the phone keyboard | * Enter the WLAN configuration on the phone using the phone keyboard | ||
Line 13: | Line 12: | ||
WEP-Key Index : 1 | WEP-Key Index : 1 | ||
Check if the IP72 has successfully joined the "innovaphone_ip27" SSID by navigating to Menu -> Administration -> Information -> Network. | |||
If DHCP server is available, the first line displays the assigned IP address. | |||
For static IP address configuration, go to Menu -> Administration -> Network. There change the DHCP Mode to "Off", than enter IP address submenu, enter the IP address and the netmask and save changes and leave all screens by pressing the "Save" button in the softkey-line, left. | |||
Now use the IP address to access the phone with a browser. | |||
Default user and password: | |||
User : admin | |||
Password : ip72 |
Revision as of 16:54, 27 November 2009
- Configure the WLAN access point temporarily to match IP72's default (factory) WLAN settings. Than use the web browser to access the IP72 and change to "real" production-use WLAN config
- Enter the WLAN configuration on the phone using the phone keyboard
- Connect the USB cradle to the Windows PC and use usbload.exe application to configure the WLAN phone through command line interface
Configuring the access point to match IP72's factory WLAN settings
Default IP72 WLAN config:
SSID : innovaphone_ip72 Encryption : static WEP 128 WEP-Key (ASCII) : innovaphoneag WEP-Key (Hex) : 696e6e6f766170686f6e656167 WEP-Key Index : 1
Check if the IP72 has successfully joined the "innovaphone_ip27" SSID by navigating to Menu -> Administration -> Information -> Network.
If DHCP server is available, the first line displays the assigned IP address. For static IP address configuration, go to Menu -> Administration -> Network. There change the DHCP Mode to "Off", than enter IP address submenu, enter the IP address and the netmask and save changes and leave all screens by pressing the "Save" button in the softkey-line, left.
Now use the IP address to access the phone with a browser. Default user and password:
User : admin Password : ip72