Howto:Initial Deployment of IP72: Difference between revisions
No edit summary |
|||
Line 1: | Line 1: | ||
* Configure the WLAN access point temporarily to match IP72's default (factory) WLAN settings. Than use the web browser to access the IP72 and change to "real" production-use WLAN config | * Configure the WLAN access point temporarily to match IP72's default (factory) WLAN settings. Than use the web browser to access the IP72 and change to "real" production-use WLAN config |
Revision as of 17:24, 27 November 2009
- Configure the WLAN access point temporarily to match IP72's default (factory) WLAN settings. Than use the web browser to access the IP72 and change to "real" production-use WLAN config
- Enter the WLAN configuration on the phone using the phone keyboard
- Connect the USB cradle to the Windows PC and use usbload.exe application to configure the WLAN phone through command line interface
Configuring the access point to match IP72's factory WLAN settings
Default IP72 WLAN config:
SSID : innovaphone_ip72 Encryption : static WEP 128 WEP-Key (ASCII) : innovaphoneag WEP-Key (Hex) : 696e6e6f766170686f6e656167 WEP-Key Index : 1 Doamin : 802.11d (World mode)
Check if the IP72 has successfully joined the "innovaphone_ip27" SSID by navigating to Menu -> Administration -> Information -> Network.
If DHCP server is available, the first line displays the assigned IP address. For static IP address configuration, go to Menu -> Administration -> Network. There change the DHCP Mode to "Off", than enter IP address submenu, enter the IP address and the netmask and save changes and leave all screens by pressing the "Save" button in the softkey-line, left.
Now use the IP address to access the phone with a browser. Default user and password:
User : admin Password : ip72
Proceed with WLAN configuration in browser.
Configuring WLAN using the phone keyboard
WLAN settings are reached through Menu -> Administration -> WLAN.
Make sure to use the "Save" softkey to save changes.
Configuring WLAN using the USB cradle and usbload.exe
Install IP72 Drivers
When inserting the IP72 into the USB cradle, Windows will ask for the location of drivers. tel72.zip from http://download.innovaphone.com contains following driver files:
usbio.sys usbio98.sys ip72_usbio.sys kathy_usbio.sys
Point windows to a directory containing these files in order to complete the installation.
Usbload
Usbload.exe is a simple command line application started from a DOS box, and used to write WLAN configuration into IP72 in a USB cradle connected to a PC. The application cam be found in tel72.zip from http://download.innovaphone.com.
Here the usbload help page:
usbload config /login user,pass (default:ip72,admin) /ssid <ssid> /wep-key <hex-wep-key> /wep-index [1-4] /cipher <none|wep|wep128|tkip|aes-wrap|aes-ccmp|ckip> /assoc none|wpa|wpa2 /auth eap-md5|leap|peap-mschapv2 /passphrase <passphrase> /user <user> /password <password> /regdomain world|usa|canada|etsi|spain|france /power-save active|poll|uapsd /power-mode active|short-doze|long-doze /power-mode-call active|short-doze|long-doze /prot h323|sip /gk-addr <gk-IP-addr> /e164 <registration number> /h323 <registration name>
Here some examples:
WEP128 cipher, Open Authentication:
usbload.exe config /ssid myssid /wep-key 9512c9cc94b0fbab30e242dc7f /cipher wep128 /wep-index 1 /prot h323 /gk-addr 192.168.0.10 /e164 501
TKIP cipher, WPA-PSK Authentication:
usbload config /ssid another-ssid /cipher tkip /assoc wpa /passphrase abcd1234 /regdomain etsi /prot h323 /gk-addr 192.168.1.10 /e164 501
AES-CCMP cipher, WPA2-PSK Authentication:
usbload.exe config /ssid somessid /cipher aes-ccmp /assoc wpa2 /passphrase busybee /power-save uapsd /power-mode long-doze /regdomain etsi /prot h323 /gk-addr 172.16.100.1 /e164 8989
TKIP cipher, WPA2 with PEAP-MSCHAPv2
usbload config /ssid another-ssid /cipher tkip /assoc wpa2 /auth peap-mschapv2 /user usr /password pass /regdomain etsi /prot h323 /gk-addr 192.168.1.10 /e164 501
Saving the configuration may sometimes require an automatic IP72 reset.
Please not that you have to run the IP72 in normal mode (not in charger mode) in order to use usbload.
Note: All strings must be latin1 url encoded, You may encounter problems with special characters in passwords, passphrases and user names.
Example: /user joe cmp /password 1+1 is illegal and should be url-encoded to /user joe%20cmp /password 1%2B1