Howto:Siemens Gigaset S685IP - Siemens -Testreport: Difference between revisions

From innovaphone wiki
Jump to navigation Jump to search
← Older editNewer edit →
VisualWikitext
Line 112: Line 112:
|----
|----
|Overlapped sending
|Overlapped sending
|?, No
|No
|----
|----
|Early media channel
|Early media channel
Line 133: Line 133:
|----
|----
|Reverse Media Negotiaton
|Reverse Media Negotiaton
|?
|Yes
|----
|----
|Device shows CDPN/CGPN on incoming call
|Device shows CDPN/CGPN on incoming call
Line 151: Line 151:
|----
|----
|Device supports asymetric codec negotiation
|Device supports asymetric codec negotiation
|?
|not tested
|----
|----
|Device supports codec renegotiation during a conversation
|Device supports codec renegotiation during a conversation
Line 166: Line 166:
|----
|----
|SOAP Call works?  
|SOAP Call works?  
|?
|Yes, no auto answer
|----
|----
|Long Time Call (>30 min) works?
|Long Time Call (>30 min) works?

Revision as of 17:44, 30 March 2010

Summary

Certification Status

This product is being tested right now. The test is not yet completed.


Version

Firmware Version: 

1.0.2.3

Hardware Version: 

1.0.0.1

innovaphone Firmware: 

SR2 HF5

Test Setup

Device Setup

Tested feature Result
Register Device w/o specific configuration (requires DHCP) No
DHCP is default Yes
DHCP yields timeserver and time displays correctly No, set static to public NTP server
SNTP config has TZ string for timezone/dst autoconfig No, set static to public NTP server
DHCP yields correct default gateway Yes
Device supports magic registration (e.g. by serial) No
Fixed registrations works Yes
Device registers w/o Extension (just by name) Yes
Device registers by extension Yes
Device registers with password Yes
Device registers multiple identities Yes
Device supports STUN protocol Yes
Device sends NAT - keepalive messages Yes
Device refreshes the PBX registration Yes
Device supports SIP over TCP No
Device supports SRTP No
Device supports SIPS (SIP over TLS) No
Device supports HTTPS No
Device supports VAD (Voice activity detection) not tested
Supported menu languages Yes

Test Results

Basic Call

Tested feature Result
call using g711a Yes
call using g711u Yes
call using g729 Yes
Overlapped sending No
Early media channel Yes
Device shows called id number Yes
Device shows called id name Yes
Device shows called id display info Yes
Fax using T.38 N/A
CGPN can be supressed Yes
Reverse Media Negotiaton Yes
Device shows CDPN/CGPN on incoming call Yes
Device shows CDPN/CGPN on outgoing call Yes
Device shows connected number No
Device shows diverting number Yes
Device supports distinctive ringing ?
Device supports asymetric codec negotiation not tested
Device supports codec renegotiation during a conversation Yes
Device shows correct display message in case of busy CDPN Yes
Device shows correct display message in case of not existing CDPN Yes
Device shows correct display message in case that the call is declined Yes
SOAP Call works? Yes, no auto answer
Long Time Call (>30 min) works? ?
Voice Quality OK? Yes

DTMF

Tested feature Result
DTMF tones sent correctly Yes
DTMF tones received correctly ?


Hold/Retrieve

Tested feature Result
Device handles incoming hold correctly Yes
Device can put a call on hold using correctly(inactive or sendonly) Yes, nicht r taste

Transfer with consultation

Tested feature Voice Ok? MoH Ok?
inno1 calls inno2. inno2 transfers to testphone. Yes Yes
inno1 calls inno2. inno1 transfers to testphone. Yes Yes
inno1 calls testphone. inno1 transfers to inno2. Yes Yes
inno1 calls testphone. testphone transfers to inno2. Yes Yes
testphone calls inno1. inno1 transfers to inno2. Yes Yes
testphone calls inno1. testphone transfers to inno2. Yes Yes

Transfer with consultation (alerting only)

Tested feature Voice Ok? MoH Ok?
inno1 calls inno2. inno2 transfers to testphone. Yes Yes
inno1 calls inno2. inno1 transfers to testphone. Yes Yes
inno1 calls testphone. inno1 transfers to inno2. Yes Yes
inno1 calls testphone. testphone transfers to inno2. Yes Yes
testphone calls inno1. inno1 transfers to inno2. Yes Yes
testphone calls inno1. testphone transfers to inno2. Yes Yes

Blind Transfer

Tested feature Voice Ok?
inno1 calls inno2. inno2 transfers to testphone. Yes
inno1 calls inno2. inno1 transfers to testphone. Yes
inno1 calls testphone. inno1 transfers to inno2. Yes
inno1 calls testphone. testphone transfers to inno2. No
testphone calls inno1. inno1 transfers to inno2. Yes
testphone calls inno1. testphone transfers to inno2. No

Blind Transfer (alerting only)

Tested feature Voice Ok?
inno1 calls inno2. inno2 transfers to testphone. Yes
inno1 calls testphone. testphone transfers to inno2. No
testphone calls inno1. inno1 transfers to inno2. Yes

Broadcast Group & Waiting Queue

Tested feature Result
testphone makes call to a Broadcast Group. inno1 picks up. Yes
inno1 makes call to a Broadcast Group. testphone picks up. Yes
testphone makes call to a Waiting Queue. inno1 picks up before announcement is played. Yes
testphone makes call to a Waiting Queue. inno1 picks up after announcement is played. Yes
inno1 makes call to a Waiting Queue. testphone picks up. Yes

Other Features

Directory

Tested feature Result
Device built-in directory keine Einbindung eines Firmenverzeichnisses
Exists Yes, only local
Can be dialled from Yes
Does CLI resolution Yes

Hands free

Tested feature Result
Loudspeaker operation works fine Yes
Hands free works fine Yes
Volume adjustable during call Yes

Keys

Tested feature Result
Device has speed dial keys Yes
Device has programmable function keys Yes
Device has partner keys No

Configuration

innovaphone configuration

3rd party product configuration

Related Articles

Retrieved from "https://wiki.innovaphone.com/index.php?title=Howto:Siemens_Gigaset_S685IP_-_Siemens_-Testreport&oldid=16923"