ReleaseNotes10:Firmware

This is the Firmware V10 Roadmap Document.

The release date of the next beta is planed for the third monday of a month. Please note that this a scheduled and no fix date.

This article is generated automatically. Do not edit! Please see the disclaimer before using the information presented here!

V10 Beta 2

Changes included in Version 10 beta2 Definition

New Features

PBX: Show conference object online state

Status	Closed
Id	89440

The PBX broadcast conference object supports the online state in myPBX dependent on its configuration and its group members' online state now.

Encoding of conference video stream

Status	To-decide
Id	89455

If a participant starts a 3rd party conference while it is already receiving a video conference stream, it has to adapt the conference stream to fit the encoder size. We have to downscale the image.

H.323: Automatically connect signaling TCP if NAT router is detected

Status	Closed
Id	89497

When regestering an endpoint from a private network to a PBX within the public network, the signaling TCP connection must be established and maintained by the endpoint. Otherwise calls to the endpoint are not possible.

myPBX: Pickup calls

Status	Closed
Id	89536

Pickup calls that are alerting at a favourite contact.

myPBX: Show needed browser features that are deactivated

Status	Closed
Id	89542

To be implemented in version 10.

PRI-QSIG: Interop config for channel numbering

Status	Closed
Id	89578

The QSIG standard defines to use Channel numbers (1-30) instead of timeslot (1-15, 16-31) as it is defined for EDSS1. There are many 'old' QSIG implementations around, which do it wrong. The QSIG-ECMA1 protocol setting is used for these 'old' implementations and the QSIG-ECMA2 setting for standard conform inplementations.

With the QSIG-ECMA1 also 'old' facility coding is used. There is also the combination of standard facility coding and timeslots for channels around so an independent mechanism to configure the channel numbering is needed.

Bug Fixes

myPBX: Dial directly from outlook

Status	Closed
Id	87416

Start call immediately instead of copying the number/URI to myPBX.

myPBX: Select im session when focusing chat window

Status	Closed
Id	89490

In order to simplify adding users to the chat.

PBX Mobility: Conference ID not set for outgoing calls initiated by myPBX

Status	Closed
Id	89502

This could cause several problems:
- When the call was sent to a local user with multiple registrations, the call to each registration had a different conferenceID, so myPBX could not match these calls to actually being only a single call, so multiple calls were dissplayed
- The CDRs created for this call could not be matched

SIP: Auto answer with SDP in ACK

Status	To-decide
Id	89539

Auto answer results into no-audio when INVITE comes w/o SDP offer.

SIP: Don't tell application that registration is down when handling redirect response

Status	To-decide
Id	89582

Don't tell application that registration is down when handling redirect response for REGISTER.

Gateway: Missed FAX pages received with the FAX interface

Status	Closed
Id	89587

If the FAX interface is used to receive a FAX document with ECM mode and the transmitting terminal appends additional EOLs, the page counter is wrong and document pages are not written. This is fixed now.

SIP: No T.38 parameter when indicating capabilitity only

Status	To-decide
Id	89617

No T.38 parameter when indicating capabilitity only.

Offer
\tv=0
\to=- 2 1 IN IP4 172.16.16.124
\ts=-
\tt=0 0
\tm=audio 16386 RTP/SAVP 8 101 13
\tc=IN IP4 172.16.16.124
\ta=rtpmap:101 telephone-event/8000
\ta=fmtp:101 0-15
\ta=ptime:20
\ta=silenceSupp:off - - - -
\ta=sendrecv
\ta=crypto:1 AES_CM_128_HMAC_SHA1_80 inline:WJl714I+mpSr47ld1YjYMf8t9xQo0xYHUng1CnDi
\tm=image 0 udptl t38
\tc=IN IP4 172.16.16.124

Instead of
\tv=0
\to=- 2 1 IN IP4 172.16.16.124
\ts=-
\tt=0 0
\tm=audio 16394 RTP/SAVP 8 101 13
\tc=IN IP4 172.16.16.124
\ta=rtpmap:101 telephone-event/8000
\ta=fmtp:101 0-15
\ta=ptime:20
\ta=silenceSupp:off - - - -
\ta=sendrecv
\ta=crypto:1 AES_CM_128_HMAC_SHA1_80 inline:sPngj1zoO9wI1pc1tMTymWCzTgwMoamPuJAFIhga
\tm=image 0 udptl t38
\tc=IN IP4 172.16.16.124
\ta=T38FaxVersion:0
\ta=T38MaxBitRate:14400
\ta=T38FaxFillBitRemoval:0
\ta=T38FaxTranscodingMMR:0
\ta=T38FaxTranscodingJBIG:0
\ta=T38FaxRateManagement:transferredTCF
\ta=T38FaxUdpEC:t38UDPRedundancy

OS: Potential trap when starting a timer, which is already deleted

Status	Closed
Id	89628

Could result in a strange trap with PBX transfer/recall

myPBX launcher: Multi-screen support for video window

Status	Closed
Id	89630

Detect if the window has been moved to a different screen.

PBX Admin UI: Reconfiguring user visibility (Access) did not work correctly

Status	Closed
Id	89636

If a setting for a user/group was deleted, it could happen that some of the settings (Group, Online, Presence, Dialog, Ids) where copied to the next entry.

Media: Redirecting SRTP streams for NAT clients only after successful SRTP authentication

Status	To-decide
Id	89661

Media endpoints support NAT.
If receiving RTP/SRTP from an address other than negotiated one
media endpoints redirecting their media stream towards source of incoming media stream.
In case of SRTP, this NAT workaround is only executed if incoming media stream has passed authentication.
For securitiy reasons.

Office2010 Integration: Own presence did always show the IM presence

Status	Closed
Id	89722

Outlook always showed the IM presence. It should display the mixed presence from all sources.

IP-DECT: Trap with call transfer

Status	Closed
Id	89786

A trap occurs if a call transfer is received in the IP-DECT radio module. This is fixed now.

myPBX: IE8 script error in chat window

Status	Closed
Id	89788

Focusing invisible elements causes an exception in IE8

Zeile: 386
Zeichen: 9
Code: 0
Fehlermeldung: Das Steuerelement kann den Fokus nicht erhalten, da dieses unsichtbar oder nicht aktiviert ist oder keinen Fokus zulässt.
URL: http://xxx.xxx.xxx.xxx/PBX0/MY/mypbx10_im.js?lang=de

IP-DECT: Trap with anonymous login

Status	Closed
Id	89814

A trap can occur during login feature in the IP-DECT radio module. This is fixed now.

Other Bug Fixes

89840

dde

Restart COM-Server after failed method call to an Office application