Howto:Step-by-step faxserver installation

This document explains a step-by-step installation and configuration of the innovaphone fax solution.

Applies To

This information applies to the innovaphone firmware V10 final and Linux application innovaphone Fax V10 final.

Installation

• If the innovaphone Linux Application Platform is not yet running, install it with this instructions.
• Download the latest innovaphone Fax application file and upload it to the innovaphone Linux Application Platform:

Configuration

• Add a PBX Gateway object with a number and the enabled prefix option.
• If there is not yet a TAPI login in the PBX, add a PBX User object for it with at least group CF rights and a set password.
• The TAPI login and the gateway object must be in the same group and the TAPI login object must have active group notifications:

• Add the registration in the Gateway FAX interface to the PBX Gateway object with the enabled T.38 option:

• Add the HTTP login credentials for the fax server Webdav folder at the HTTP client:

• Configure at least one email address for each user, here the system name is used as domain:

• And enable the fax license for each user which is allowed to send or receive fax documents:

• Add a new fax server configuration at the Fax application page with the add link:

• Enter the server specific issues:

• Enter the SMTP authentication credentials to send an email to the internal mail server, the fax server domain and an administrator email address:

• Enter the PBX-SOAP and gateway object informations. Please test the connection with the Connection Test button:

• Enter fax specific configurations. The subscriber id includes the fax gateway object number:

• Send an email to the fax server as SMTP server with SMTP authorisation with the recipient address public number@fax server domain.
• This fails if the innovaphone-linux certificate is not yet trusted. Trust it at the innovaphone device:

Related Articles

Reference:Linux Application Platform

Reference:Faxserver