Reference10:Concept Provisioning

Starting with version 10, innovaphone devices connect automatically with http://config.innovaphone.com/init during commissioning or after resetting to the initial state. This process serves to simplify provisioning.

In the future, this mechanism can be used by innovaphone partners to significantly reduce configuration work. You can set up an individual update server that contains pre-prepared configurations for innovaphone devices. These can then be assigned to a specific project in my.innovaphone. A corresponding update URL is all that is stored for this purpose. The allocated update server applies to new devices that are assigned via the MAC address to this project in my.innovaphone.

If an innovaphone device then connects with http://config.innovaphone.com/init, an enquiry is made in my.innovaphone to see whether an update server is available for the MAC address. If this is the case, the device can automatically connect automatically to it via the update URL to retrieve the local configuration - fully automated, without further intervention by the administrator.

A connection is always established automatically to http://config.innovaphone.com/init. If you would like to avoid this procedure, the innovaphone device must be booted in an environment without a public internet connection.

The following information is transmitted to innovaphone upon connection with http://config.innovaphone.com/init: The version and serial number of the device and the public IP address. This information is managed in accordance with innovaphone's data protection policy.