Datasheet IP170: Difference between revisions

From innovaphone wiki
Jump to navigation Jump to search
mNo edit summary
 
Line 60: Line 60:
* Display of interface and connection status
* Display of interface and connection status
* Generation of log and trace files and SNMP.V3-traps
* Generation of log and trace files and SNMP.V3-traps
 
===Supplementary Services (Excerpt)===
* Dialogue guidance in 20 languages, can be extended
**Cestina, Dansk, Deutsch, Eesti, English, Español, Français, Hrvatski, Italiano, Latviešu, Magyar, Nederlands, Norsk, Polski, Português, Slovenija, Suomi, Svenska, ภาษาไทย
* Announcement function, for authorised subscribers
* Display message waiting
* Mute, deactivates microphone for a short time
* Three party conference, also with external subscribers
* DTMF tone recognition
* Call transfer, with/without consultation
* Hold, supported by Music-on-Hold
* Transmit subscriber name along with signalling
* Call waiting, respective signalling of waiting call to caller
* DTMF tone generation
===Supplementary Features===
===Supplementary Features===
* Hands free key – Full duplex handsfree calls
* Hands free key – Full duplex handsfree calls

Latest revision as of 15:51, 18 November 2025

innovaphone IP170
Flush mount intercom station

Firmware

Device operated with Version 16 and higher

Housing

  • Frontside 68mm-Speaker 4Ohm
  • OLED display, 128 x 64 pixels
  • Rubber-made backlighted function keys (3 x dynamic assignable, 3 x navigation)
  • Rubber-made backlighted telephone keypad
  • 3 rubber-made backlighted call mode keys (hands-free, direct/priority, PTT)
  • Call indicator
  • Ambient light sensor
  • Measurements (W x D x H): 94 x 31 x 269 mm
  • Flushmount

Interfaces

  • 10/100-BASE-TX (auto negotiation), RJ-45 (modular Jack 8P8C)
  • 24V PSU external power supply (input)
  • 24V DC output (500mA)
  • Relay (NO/NC)
  • Handset (6-wire)
  • Headset (6-wire) PTT support
  • Speaker (10W)
  • Rear USB port - internal use only

Hardware

  • Power supply: „Power over Ethernet+“ according to IEEE 802.3at, Class 4
  • 128MByte RAM, 16MByte Flash
  • Operation temperature: +5 °C to +55 °C
  • Humidity: 10% to 90% (not condensed)
  • Storage temperature: -10 °C to +70 °C

Voice Codecs

  • G.711 A-law / μ-law, G.722, Opus-NB, Opus-WB
  • Dynamic Jitter Buffering
  • Acoustic echo cancellation
  • Voice Activity Detection
  • Comfort Noise Generation

VoIP Protocols

  • H.323 Version 5, including proprietary extensions
  • H.323 over UDP, TCP, TLS 1.3
  • SIP Version 2, conform RFC 3261
  • SIP over UDP, TCP, TLS
  • RTP, SRTP (SDES, DTLS 1.2), RTCP, ICE

Network

  • IPv4/IPv6 Support
  • NAT, H.323-NAT, STUN, TURN over UDP/TCP
  • RSTP, EAP-TLS/EAP-MD5 acc. to IEEE 802.1X
  • LDAP/S support
  • DHCP support
  • NTP support
  • VLAN-ID acc. to IEEE 802.1Q
  • LLDP support for VLAN configuration
  • PPPoE, manual or automatic connection after boot
  • PPTP Tunneling up to 4 tunnels simultaneously, encoding via MPPE

Administration

  • Password protected administration access via web-browser, optional two-factor authentication
  • Store and restore configuration files
  • System-wide automatic upgrade of firmware and configuration data via the myApps Devices app
  • Automatic ping connection test
  • Display of interface and connection status
  • Generation of log and trace files and SNMP.V3-traps

Supplementary Services (Excerpt)

  • Dialogue guidance in 20 languages, can be extended
    • Cestina, Dansk, Deutsch, Eesti, English, Español, Français, Hrvatski, Italiano, Latviešu, Magyar, Nederlands, Norsk, Polski, Português, Slovenija, Suomi, Svenska, ภาษาไทย
  • Announcement function, for authorised subscribers
  • Display message waiting
  • Mute, deactivates microphone for a short time
  • Three party conference, also with external subscribers
  • DTMF tone recognition
  • Call transfer, with/without consultation
  • Hold, supported by Music-on-Hold
  • Transmit subscriber name along with signalling
  • Call waiting, respective signalling of waiting call to caller
  • DTMF tone generation

Supplementary Features

  • Hands free key – Full duplex handsfree calls
  • Direct in key – Full duplex intrusion to idle or busy (can be disabled)
  • PTT key – Talkback and classic PTT use (mic mute feature)
  • Zone announcements – unlimited zones

Licenses

innovaphone terminals (IP1xx, IP2xx, IP6x, IP7x) do not require any special device licenses

Conformities

see separate information sheet


Order Number: 01-00170-001

innovaphone® AG | Umberto-Nobile-Str. 15 | 71063 Sindelfingen | Germany | T +49 7031 73009-0 | F +49 7031 73009-9 | info@innovaphone.com | www.innovaphone.com
Errors, delivery times and technical specifications may be subject to change. Copyright © 1997-2025 innovaphone® AG