Reference:Configuration/General/SNMP: Difference between revisions
Jump to navigation
Jump to search
m How to disable SNMP completely |
m link to INNO-MIB.TXT file |
||
| Line 1: | Line 1: | ||
The VoIP device allows the operating state to be monitored using '''SNMP''' (Simple Network Management Protocol with version 1.0). Standard MIB II and a manufacturer-specific MIB (Management Information Base) are supported. Detailed information about this MIB can be obtained from a certified innovaphone dealer or downloaded directly in the download area of the innovaphone homepage (http://www.innovaphone.com). | The VoIP device allows the operating state to be monitored using '''SNMP''' (Simple Network Management Protocol with version 1.0). Standard MIB II and a manufacturer-specific MIB (Management Information Base) are supported. Detailed information about this MIB can be obtained from a certified innovaphone dealer or downloaded directly in the download area of the innovaphone homepage. It is included in the folder "tools" together with other applications and firmware. File name: INNO-MIB.TXT (http://www.download.innovaphone.com). | ||
{| | {| | ||
Revision as of 13:25, 7 August 2008
The VoIP device allows the operating state to be monitored using SNMP (Simple Network Management Protocol with version 1.0). Standard MIB II and a manufacturer-specific MIB (Management Information Base) are supported. Detailed information about this MIB can be obtained from a certified innovaphone dealer or downloaded directly in the download area of the innovaphone homepage. It is included in the folder "tools" together with other applications and firmware. File name: INNO-MIB.TXT (http://www.download.innovaphone.com).
| Community: | If the standard community name public is not being used, a different community name can be entered in this field. |
| Device Name: | For more detailed information, a device name can be specified here for the SNMP agent. |
| Contact: | As can a contact person (Contact). |
| Location: | As can a location (Location). |
| Authentication Trap: | Access via SNMP is only possible if the correct community name is entered. If this check box is checked, a trap is generated in the case of access with an incorrect community name. |
| Trap Destination: | Destinations for trap messages also have to be defined if the device is to trigger the traps defined in the manufacturer-specific innovaphone MIB. |
| Allowed Networks: | To increase security, access to the device can be restricted by restricting SNMP access to a defined list of computers or IP address ranges. To disable SNMP access completely just enter 0.0.0.0 as Address and 255.255.255.255 as Mask. |