Howto:Siemens Gigaset S685IP - Siemens -Testreport

Certification Status

This product is being tested right now. The test is not yet completed.

Test Setup

Device Setup

Tested feature	Result
Register Device w/o specific configuration (requires DHCP)	No
DHCP is default	Yes
DHCP yields timeserver and time displays correctly	No, set static to public NTP server
SNTP config has TZ string for timezone/dst autoconfig	No, set static to public NTP server
DHCP yields correct default gateway	Yes
Device supports magic registration (e.g. by serial)	No
Fixed registrations works	Yes
Device registers w/o Extension (just by name)	Yes
Device registers by extension	Yes
Device registers with password	Yes
Device registers multiple identities	Yes
Device supports STUN protocol	Yes
Device sends NAT - keepalive messages	Yes
Device refreshes the PBX registration	Yes
Device supports SIP over TCP	No
Device supports SRTP	No
Device supports SIPS (SIP over TLS)	No
Device supports HTTPS	No
Device supports VAD (Voice activity detection)	not tested
Supported menu languages	Yes

Test Results

Basic Call

Tested feature	Result
call using g711a	Yes
call using g711u	Yes
call using g729	Yes
Overlapped sending	No
Early media channel	Yes
Device shows called id number	Yes
Device shows called id name	Yes
Device shows called id display info	Yes
Fax using T.38	N/A
CGPN can be supressed	Yes
Reverse Media Negotiaton	Yes
Device shows CDPN/CGPN on incoming call	Yes
Device shows CDPN/CGPN on outgoing call	Yes
Device shows connected number	No
Device shows diverting number	Yes
Device supports distinctive ringing	No
Device supports asymetric codec negotiation	not tested
Device supports codec renegotiation during a conversation	Yes
Device shows correct display message in case of busy CDPN	Yes
Device shows correct display message in case of not existing CDPN	Yes
Device shows correct display message in case that the call is declined	Yes
SOAP Call works?	Yes, no auto answer
Long Time Call (>30 min) works?	Yes
Voice Quality OK?	Yes

DTMF

Tested feature	Result
DTMF tones sent correctly	Yes
DTMF tones received correctly	Yes

Hold/Retrieve

Tested feature	Result
Device handles incoming hold correctly	Yes
Device can put a call on hold using correctly(inactive or sendonly)	Yes (not by R-key but by menu option)

Transfer with consultation

Tested feature	Voice Ok?	MoH Ok?
inno1 calls inno2. inno2 transfers to testphone.	Yes	Yes
inno1 calls inno2. inno1 transfers to testphone.	Yes	Yes
inno1 calls testphone. inno1 transfers to inno2.	Yes	Yes
inno1 calls testphone. testphone transfers to inno2.	Yes	Yes
testphone calls inno1. inno1 transfers to inno2.	Yes	Yes
testphone calls inno1. testphone transfers to inno2.	Yes	Yes

Transfer with consultation (alerting only)

Tested feature	Voice Ok?	MoH Ok?
inno1 calls inno2. inno2 transfers to testphone.	Yes	Yes
inno1 calls inno2. inno1 transfers to testphone.	Yes	Yes
inno1 calls testphone. inno1 transfers to inno2.	Yes	Yes
inno1 calls testphone. testphone transfers to inno2.	Yes	Yes
testphone calls inno1. inno1 transfers to inno2.	Yes	Yes
testphone calls inno1. testphone transfers to inno2.	Yes	Yes

Blind Transfer

Tested feature	Voice Ok?
inno1 calls inno2. inno2 transfers to testphone.	Yes
inno1 calls inno2. inno1 transfers to testphone.	Yes
inno1 calls testphone. inno1 transfers to inno2.	Yes
inno1 calls testphone. testphone transfers to inno2.	No
testphone calls inno1. inno1 transfers to inno2.	Yes
testphone calls inno1. testphone transfers to inno2.	No

Blind Transfer (alerting only)

Tested feature	Voice Ok?
inno1 calls inno2. inno2 transfers to testphone.	Yes
inno1 calls testphone. testphone transfers to inno2.	No
testphone calls inno1. inno1 transfers to inno2.	Yes

Broadcast Group & Waiting Queue

Tested feature	Result
testphone makes call to a Broadcast Group. inno1 picks up.	Yes
inno1 makes call to a Broadcast Group. testphone picks up.	Yes
testphone makes call to a Waiting Queue. inno1 picks up before announcement is played.	Yes
testphone makes call to a Waiting Queue. inno1 picks up after announcement is played.	Yes
inno1 makes call to a Waiting Queue. testphone picks up.	Yes

Other Features

Directory

Tested feature	Result
Device built-in directory	not possible to connect to a LDAP phonebook(Estos Metadir)
Exists	Yes, only local
Can be dialled from	Yes
Does CLI resolution	Yes

Hands free

Tested feature	Result
Loudspeaker operation works fine	Yes
Hands free works fine	Yes
Volume adjustable during call	Yes

Keys

Tested feature	Result
Device has speed dial keys	Yes
Device has programmable function keys	Yes
Device has partner keys	No

Configuration

innovaphone configuration

Add a new PBX object of type "user":

3rd party product configuration

Telephony Connection

First you have to create a registration from the DECT/IP base-station to the PBX. Go to Telephony->Connections and edit the first entry. Remember to click on Show advanced settings in order to enter as Domain name the IP address of your innovaphone PBX.

Number Assignment

If you have more than one DECT handset registered to your base-station, you can use the Telephony->Number Assignment menu to assign a DECT handset to a specific PBX registration.

Voicemail

To get the current voicemail status displayed on your DECT handset, you have to enter the coresponding innovaphone voicemail number in the Telephony->Network Mailbox menu.