Reference8:Configuration/DECT/Master: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 14: | Line 14: | ||
* '''STUN Server:''' STUN server to be used if DECT master has no public ip address and SIP server is outside the local network. | * '''STUN Server:''' STUN server to be used if DECT master has no public ip address and SIP server is outside the local network. | ||
* '''Name for Authentication:''' Some SIP PBXs need authentication name different from the registration id. This enables the number being used as id and the name for authentication. | * '''Name for Authentication:''' Some SIP PBXs need authentication name different from the registration id. This enables the number being used as id and the name for authentication. | ||
* '''Redirection with GK ID''' If enabled and the user registration is redirected, the GK ID of the redirecting PBX is appended to the registration to the redirected PBX. | * '''Redirection with GK ID:''' If enabled and the user registration is redirected, the GK ID of the redirecting PBX is appended to the registration to the redirected PBX. | ||
* '''Enbloc Dialing''' If enabled, the dialed numbers will be sent together within the setup message after timeout. | * '''Enbloc Dialing:''' If enabled, the dialed numbers will be sent together within the setup message after timeout. | ||
* '''Send inband DTMF''' If enabled, DTMF will be sent as inband DTMF. | * '''Send inband DTMF:''' If enabled, DTMF will be sent as inband DTMF. | ||
* '''Allow DTMF through RTP''' If enabled, DTMF capability through RTP is allowed. | * '''Allow DTMF through RTP:''' If enabled, DTMF capability through RTP is allowed. | ||
* '''Enable messaging to PBX''' Message will be send via SIP or H.323, if disabled messages will be sent via the Polycom MSF-Module. | * '''Enable messaging to PBX:''' Message will be send via SIP or H.323, if disabled messages will be sent via the Polycom MSF-Module. | ||
* '''Idle Display Update''' Enables idle display updates. | * '''Idle Display Update:''' Enables idle display updates. | ||
* '''Disable broadcast delay''' For small installations it is not necessary to delay the broadcasts for incoming calls to the radios. Enabling this option is not recommended for big systems. | * '''Disable broadcast delay:''' For small installations it is not necessary to delay the broadcasts for incoming calls to the radios. Enabling this option is not recommended for big systems. | ||
* '''Response timeout''' If the timeout is configured and the handset does not answer, the call is released with cause 'No user responding' after the timeout. | * '''Response timeout:''' If the timeout is configured and the handset does not answer, the call is released with cause 'No user responding' after the timeout. | ||
* '''LDAP Directory Search'''If enabled and a Ldap server is configured, the IP1200 does a LDAP directory look up for incoming calls. Shows up the callers name on the Dect phones. | * '''LDAP Directory Search:'''If enabled and a Ldap server is configured, the IP1200 does a LDAP directory look up for incoming calls. Shows up the callers name on the Dect phones. | ||
Revision as of 10:13, 11 June 2010
It is necessary to configure the operating mode of the DECT system. A gatekeeper must also be specified here, on which the innovaphone PBX component is operated.
- Mode: Active switches on the DECT master function. In every DECT system, there must be a DECT master.
- Off switches off the DECT master function.
- Active switches on the DECT master function.
- Standby switches on the standby function for the DECT master.
- Primary Master IP Address: This field is only visible if this device has been configured as Standby-Master (Mode = Standby). The IP address of the DECT-Master has to be configured here.
- Prot: The protocol to be used for the communication. There is a choice between:
- H.323 (RFC 1889), which is the recommended protocol for innovaphone VoIP devices, since it implements most features.
- SIP (RFC 3261).
- GK: The IP address of the primary gatekeeper. The device on which the innovaphone PBX component is operated.
- Alt GK: The IP address of the secondary, alternative gatekeeper.
- GK ID: The gatekeeper ID of the gatekeeper to be used.
- STUN Server: STUN server to be used if DECT master has no public ip address and SIP server is outside the local network.
- Name for Authentication: Some SIP PBXs need authentication name different from the registration id. This enables the number being used as id and the name for authentication.
- Redirection with GK ID: If enabled and the user registration is redirected, the GK ID of the redirecting PBX is appended to the registration to the redirected PBX.
- Enbloc Dialing: If enabled, the dialed numbers will be sent together within the setup message after timeout.
- Send inband DTMF: If enabled, DTMF will be sent as inband DTMF.
- Allow DTMF through RTP: If enabled, DTMF capability through RTP is allowed.
- Enable messaging to PBX: Message will be send via SIP or H.323, if disabled messages will be sent via the Polycom MSF-Module.
- Idle Display Update: Enables idle display updates.
- Disable broadcast delay: For small installations it is not necessary to delay the broadcasts for incoming calls to the radios. Enabling this option is not recommended for big systems.
- Response timeout: If the timeout is configured and the handset does not answer, the call is released with cause 'No user responding' after the timeout.
- LDAP Directory Search:If enabled and a Ldap server is configured, the IP1200 does a LDAP directory look up for incoming calls. Shows up the callers name on the Dect phones.