Reference:Administration/Gateway/General: Difference between revisions

From innovaphone wiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 1: Line 1:
'''General''' gateway settings can be made here:
== General Gateway Settings ==
{|
|valign="top" nowrap="true"|'''Gatekeeper ID'''
|The Gatekeeper Identifier. This is used with VOIP interfaces configured as "Gatekeeper/Registrar" as Gatekeeper Identifier (H.323) or Registrar Name (SIP). If multiple Gatekeepers are installed in a network this can be used to find the right gatekeeper using gatekeeper discovery. If a PBX is enabled on the same system a different Gatekeeper Identifier must be used for Gateway and PBX.
|-
|valign="top" nowrap="true"|'''Automatic CGPN Mapping'''
|Enables automatic calling party number mapping. If enabled the calling party number is modified in a way that with the configured routes a call back from the destination interface with this calling party number is routed to the source interface with the right called party number. There is the option of excluding individual routes from the automatic correction of all calling numbers.
|-
|valign="top" nowrap="true"|'''Call Logging'''
|A checked check box enables the output of syslog information in respect of the calls made via the gateway.
|-
|valign="top" nowrap="true"|'''Route Logging'''
|A checked check box enables the output of syslog information in respect of the used voice routes of the gateway.
|-
|valign="top" nowrap="true"|'''Billing CDRs only'''
|If enabled for each call only a single record at the end of the call is send as CDR. This record contains all information needed for billing purposes.
|}


* '''Gatekeeper ID:''' The unique gatekeeper name. If several gatekeepers are used in a network, then different gatekeeper IDs must be allocated. This gatekeeper ID is the ID for VoIP interfaces (see also the chapter entitled "[[Gateway_VOIP|Administration/Gateway/VoIP]]"). This field is displayed only in connection with a gatekeeper licence.
== Feature Codes ==
* '''Automatic CGPN Mapping:''' A checked check box enables automatic call number handling. The modification to the calling number is produced by analysing the routing table. Here a route is searched for, that would enable callback to the current call. There is the option of excluding individual routes from the automatic correction of all calling numbers (see Exclude from Auto CGPN check box in the Settings section of chapter "[[Gateway_Routes|Administration/Gateway/Routes]]").
* '''Call Logging:''' A checked check box enables the output of syslog information in respect of the calls made via the gateway.
* '''Route Logging:''' A checked check box enables the output of syslog information in respect of the used voice routes of the gateway.
* '''Billing CDRs only:''' If, in chapter "[[Gateway_CDR|Administration/Gateway/CDR0-1]]", a method was specified for transmitting so-called Call Detail Records (CDR), only call information that is relevant for billing is transmitted, if this check box is checked.


The '''Licences''' section provides you with a brief overview of the available device depended licences and those that have already been allocated:
If any interface with activated feature codes is configured a table to configure the feature codes is displayed. These feature codes are the same for all interfaces in the system. See [[howto:Feature Codes]] for a description of available features.


* '''Gateway:''' Gateway licences.
== Licenses ==
* '''Gatekeeper6:''' Gatekeeper licences.
* '''BRIs:''' BRI interfaces.
* '''PRIs:''' PRI interfaces.
* '''Channels:''' DSP channels.
* '''aBs:''' AB-interfaces.
* '''Registrations:''' Registratios-licenses.


If feature codes are activated on an interface, the actual codes to be used can be configured on this page as well.
This table displays the installed licenses and the current use of these licenses.


See [[howto:Feature Codes]] for a description of available features.
{|
|valign="top" nowrap="true"|'''Gateway'''
|Valid only if this is an OEM version of the gateway, which by default does not have "Gateway" capabilities. If there are no Gateway capabilities the Interfaces can only be used for a local PBX.
|-
|valign="top" nowrap="true"|'''Gatekeeper6'''
|Gatekeeper licences. Allows VOIP Interfaces of type "Gatekeeper /Registrar" to be configured.
|-
|valign="top" nowrap="true"|'''BRIs'''
|Basic Rate ISDN interfaces. The available licenses are used for the interfaces in the sequence the interfaces are displayed. To use other interfaces it is possible to disable interfaces
|-
|valign="top" nowrap="true"|'''PRIs'''
|Primary Rate ISDN interfaces. The available licenses are used for the interfaces in the sequence the interfaces are displayed. To use other interfaces it is possible to disable interfaces
|-
|valign="top" nowrap="true"|'''Channels'''
|DSP channels.
|-
|valign="top" nowrap="true"|'''ABs'''
|Analog interfaces.
|}

Revision as of 23:45, 29 March 2007

General Gateway Settings

Gatekeeper ID The Gatekeeper Identifier. This is used with VOIP interfaces configured as "Gatekeeper/Registrar" as Gatekeeper Identifier (H.323) or Registrar Name (SIP). If multiple Gatekeepers are installed in a network this can be used to find the right gatekeeper using gatekeeper discovery. If a PBX is enabled on the same system a different Gatekeeper Identifier must be used for Gateway and PBX.
Automatic CGPN Mapping Enables automatic calling party number mapping. If enabled the calling party number is modified in a way that with the configured routes a call back from the destination interface with this calling party number is routed to the source interface with the right called party number. There is the option of excluding individual routes from the automatic correction of all calling numbers.
Call Logging A checked check box enables the output of syslog information in respect of the calls made via the gateway.
Route Logging A checked check box enables the output of syslog information in respect of the used voice routes of the gateway.
Billing CDRs only If enabled for each call only a single record at the end of the call is send as CDR. This record contains all information needed for billing purposes.

Feature Codes

If any interface with activated feature codes is configured a table to configure the feature codes is displayed. These feature codes are the same for all interfaces in the system. See howto:Feature Codes for a description of available features.

Licenses

This table displays the installed licenses and the current use of these licenses.

Gateway Valid only if this is an OEM version of the gateway, which by default does not have "Gateway" capabilities. If there are no Gateway capabilities the Interfaces can only be used for a local PBX.
Gatekeeper6 Gatekeeper licences. Allows VOIP Interfaces of type "Gatekeeper /Registrar" to be configured.
BRIs Basic Rate ISDN interfaces. The available licenses are used for the interfaces in the sequence the interfaces are displayed. To use other interfaces it is possible to disable interfaces
PRIs Primary Rate ISDN interfaces. The available licenses are used for the interfaces in the sequence the interfaces are displayed. To use other interfaces it is possible to disable interfaces
Channels DSP channels.
ABs Analog interfaces.