Reference:Configuration/Registration/Directories

In this menu, there are three options for how the telephone can access telephone directories.

local enable

• A private telephone directory can be created on the device itself and used.

PBX enable

• Furthermore, all subscribers of the innovaphone PBX can be made available as a telephone directory entry.
  • User name: User name required for registration that is stored on the innovaphone PBX.
  • Password: Password for the user name, which you confirm in the Retype box.

An external database is usable as a telephone directory via the LDAP protocol.

External LDAP server

• Here, you enter the LDAP access parameters for the external telephone directory.
  • Server: IP address of the LDAP server.
  • Port: Matching part to the IP address.
  • User name: User name for authentication at the LDAP server.
  • Password: Password that goes with the user name.
  • Retype: Confirmation of the password.

The following parameters are necessary for searching within the external database. Contact the administrator of the remote database for information.

• Search base
• Mode
• Object filter
• Sort results (by 1st LDAP name attribute)
• Name attributes
• Number attributes
• H.323 ID attributes

Dialling location

• In order that the call numbers obtained from the databases may be converted into diallable telephone numbers, the parameters for your own connection must be made known.
  • Country code: Own country code without prefix or special characters.
  • Area code: Own area code / traffic discrimination digits.
  • National line (carrier-specific): Sequence of digits to obtain a national exchange access line.
  • International line (carrier-specific): Sequence of digits to obtain an international exchange access line.
  • External prefix: Sequence of digits to obtain an external access line.
  • Root numbers (pbx-specific): For the conversion of complete internal numbers, you can enter here the root numbers to be removed for the internal dialling of the call number.