Howto:M-net SIP Provider Compatibility Test

Innovaphone Compatibility Test Report

Summary

SIP Provider: M-net

The provider supports all required innovaphone features and is therefore qualified as recommended SIP Provider.

That being said, the provider has achieved 81,88% of all possible test points (131/160). For more information on the test rating, please refer to Test Description

The SIP Provider supports NAT Detection and does not require media-relay, however doesnt support T.38 what doesn't make the SIP trunk usable in hosting scenarios.

The support for G711 coder it's mandatory, this provider support G711a and not G711u what is acceptable.

Current test state

The tests for this product have been completed and it has been approved as a recommended product (Certification document).

Testing of this product has been finalized December 10th, 2013.

Testing Enviroment

This scenario describes a setup where the PBX and phones are in a private network.

• the SIP trunk is configured without Media Relay and without exclusive coder. This is the case if all tests were successful

Test Results

For more information on the test procedure, please read the following wiki article: SIP Interop Test Description. Bold lines in the test results indicate a KO-criteria.

Basic Call

Tested feature	Result
call using g711a	OK
call using g711u	NOK
call using g723	NOK
call using g729	OK
call using g722	NOK
Overlapped sending	NOK
early media channel	OK
Fax using T.38	NOK
Reverse Media Negotiation	OK
CGPN can be suppressed	OK
CLIP no screening	OK
Long time call possible(>30 min)	OK
External Transfer	OK
NAT Detection	OK
Redundancy	NOK
SIP over TCP	NOK
Voice Quality OK?	OK

Direct Dial In

Tested feature	Result
Inbound(Provider -> Innovaphone)	OK
Outbound(Innovaphone -> Provider)	OK
Loop In call(Innovaphone -> Provider -> Innovaphone)	OK

DTMF

Tested feature	Result
DTMF tones sent correctly	OK
DTMF tones sent correctly via SIP-Info	NOK
DTMF tones received correctly - WQ connect call	OK

Hold/Retrieve

Tested feature	Result
Call can be put on hold	OK
Held end hears music on hold / announcement from PBX	OK

Transfer with consultation

Tested feature	Result
Call can be transferred	OK
Held end hears music on hold	OK

The following tests are made to test if call transfer is working.

Tested feature	Voice Ok?	MoH Ok?
inno1 calls inno2. inno2 transfers to sip-provider-phone.	OK	OK
inno1 calls sip-provider-phone. inno1 transfers to inno2.	OK	OK
inno1 calls sip-provider-phone. sip-provider-phone transfers to inno2.	OK	OK
sip-provider-phone calls inno1. inno1 transfers to inno2.	OK	OK
sip-provider-phone calls inno1. sip-provider-phone transfers to inno2.	OK	OK

Transfer with consultation (alerting only)

Tested feature	Result
Call can be transferred	OK
Held end hears music on hold or dialling tone	OK
Call returns to transferring device if the third Endpoint is not available	OK

The following tests are made to test if call transfer is working.

Tested feature	Voice Ok?	MoH Ok?
inno1 calls inno2. inno2 transfers to sip-provider-phone.	OK	OK
inno1 calls sip-provider-phone. inno1 transfers to inno2.	OK	OK
inno1 calls sip-provider-phone. sip-provider-phone transfers to inno2.	OK	OK
sip-provider-phone calls inno1. inno1 transfers to inno2.	OK	OK
sip-provider-phone calls inno1. sip-provider-phone transfers to inno2.	OK	OK

Blind Transfer

Tested feature	Result
Call can be transferred	OK
Held end hears dialling tone	OK

The following tests are made to test if call transfer is working.

Tested feature	Voice Ok?	Dial Tone Ok?
inno1 calls inno2. inno2 transfers to sip-provider-phone.	OK	OK
inno1 calls sip-provider-phone. inno1 transfers to inno2.	OK	OK
inno1 calls sip-provider-phone. sip-provider-phone transfers to inno2.	OK	OK
sip-provider-phone calls inno1. inno1 transfers to inno2.	OK	OK
sip-provider-phone calls inno1. sip-provider-phone transfers to inno2.	OK	OK

CFU / CFB Transfer

Tested feature	Result
Call can be forward	OK
Held end hears dialling tone	OK

CFNR / Blind Transfer (alerting only)

Tested feature	Result
Call can be transferred or forward	OK
Held end hears dialling tone	OK

The following tests are made to test if call transfer is working.

Tested feature	Voice Ok?
inno1 calls inno2. inno2 transfers to sip-provider-phone.	OK
inno1 calls sip-provider-phone. sip-provider-phone transfers to inno2.	OK
sip-provider-phone calls inno1. inno1 transfers to inno2.	OK

Broadcast Group & Waiting Queue

Tested feature	Result
Caller can make a call to a Broadcast Group	OK
Caller can make a call to a Waiting Queue	OK
Announcement if nobody picks up the call	OK

Configuration

Firmware version

All innovaphone devices use V10 build 10.0941 as firmware.

SIP - Trunk

Number Mapping

Route Settings

• Force enblock it's required for outgoing calls.