Reference:Administration/PBX/Objects/DECT System: Difference between revisions
Jump to navigation
Jump to search
(New page: To be able to register a DECT system in the innovaphone PBX, a DECT System PBX object is required. All DECT-specific information is stored in this DECT System PBX object. During initial st...) |
No edit summary |
||
| Line 1: | Line 1: | ||
An innovaphone IP-DECT system stores system parameters in the so called DECT system LDAP object. If the DECT system runs standalone this object is created automatically. In a setup where the users are replicated from an innovaphone PBX, it cannot be created automatically, because a replication client is not allowed to create objects. In this case it has to be created on the PBX. For this purpose this object type is used. | |||
The Long Name of this object must match the DECT System Name as configured under Configuration/DECT/System on the IP-DECT devices. | |||
Revision as of 17:28, 24 April 2007
An innovaphone IP-DECT system stores system parameters in the so called DECT system LDAP object. If the DECT system runs standalone this object is created automatically. In a setup where the users are replicated from an innovaphone PBX, it cannot be created automatically, because a replication client is not allowed to create objects. In this case it has to be created on the PBX. For this purpose this object type is used.
The Long Name of this object must match the DECT System Name as configured under Configuration/DECT/System on the IP-DECT devices.