IP6010 Technical Data: Difference between revisions
mNo edit summary |
mNo edit summary |
||
Line 46: | Line 46: | ||
T.38 (Fax, supported rates 9.6k and 14.4k) | T.38 (Fax, supported rates 9.6k and 14.4k) | ||
===Voice Codecs=== | ===Voice Codecs=== | ||
{{Template:Leistungsmerkmale EN - Sprach Codecs}} | {{Template:Leistungsmerkmale EN - Sprach Codecs GW}} | ||
Data modem support | Data modem support | ||
Line 102: | Line 102: | ||
T.38 (Fax, unterstützte Raten 9.6k und 14.4k) | T.38 (Fax, unterstützte Raten 9.6k und 14.4k) | ||
===Sprach-Codecs=== | ===Sprach-Codecs=== | ||
{{Template:Leistungsmerkmale DE - Sprach Codecs}} | {{Template:Leistungsmerkmale DE - Sprach Codecs GW}} | ||
Modemunterstützung | Modemunterstützung |
Revision as of 09:32, 10 December 2014
innovaphone® AG | Umberto-Nobile-Str. 15 | 71063 Sindelfingen | Germany | T +49 7031 73009-0 | F +49 7031 73009-9 | info@innovaphone.com | www.innovaphone.com
Errors, delivery times and technical specifications may be subject to change. Copyright © 2023 innovaphone® AG
Illustration
Datasheet
innovaphone IP6010
VoIP gateway for four ISDN PRI interface and platform for innovaphone PBX and Linux applications
Housing
Size: 210 x 184 x 32 mm 1 HE for 19” systems
Weight: 1050 g
Interfaces
4 x ISDN PRI: TE and NT mode to insert in trunk lines, „Power-off-loop“ interconnect two PRI interface in power off status, total 60 channels
1 x ISDN interface in TE and NT mode, for routing, admin, synchronizing, backup or other
2 x Ethernet: RJ 45 interface 10/100-BASE-TX (auto negotiation), Power over Ethernet (802.3af, Class 3)
Slot for one Compact Flash Card Type I
Hardware
Power supply: Power over Ethernet (802.3af, Class 3)
Power Consumption: see wiki-article „HowTo:Power Consumption“
Digital Signal Processor (DSP) for codec's up to 60 voice channels
2 HDLC channels
512 MB SDRAM, 32 MB Flash
Operation temperature: 0 °C to +45 °C
Humidity: 10% to 90% (not condensed)
Storage temperature: -10 °C to +70 °C
innovaphone PBX
Platform for up to 3200 registrations resp. 1000 myPBX clients
Conference server, up to 60 subscribers
Linux Application Platform
for additional applications like Reporting, Faxserver and Exchange Calender Connector
VoIP protocols
H.323 Version 5
H.323 over UDP, TCP, TLS
SIP Version 2 conform RFC 3261
SIP over UDP, TCP, TLS
RTP, SRTP, RTCP
T.38 (Fax, supported rates 9.6k and 14.4k)
Voice Codecs
G.711 A-law / µ-law, G.723.1 (53), G.729A
VAD (Voice Activity Detection), CNG (Comfort Noise Generation)
Dynamic Jitter Buffering
Echo Compensation according to G.168
Data modem support
Network
PPPoE, manual or automatic connection after boot
PPTP Tunneling up to 32 tunnels simultaneously, encoding via MPPE
NAT, H.323-NAT
RSTP, IEEE 802.1x
VLAN-ID acc. to IEEE 802.1q
DHCP and LLDP/MED support
NTP support
ISDN
Routing VOIP-ISDN, ISDN-ISDN, VOIP-VOIP
Automatic dial tone European and US Standard
ENUM for H.323 and SIP protocols
Plays recorded messages deposed on CF card or on a web server
Protocols EDSS1, QSIG, T1-CAS, E1-CAS
Administration
Password protected administration via web-browser, Kerberos server
Log and trace files, Display of interface and connection status, Ping – connection test for Internet Protocol, Sending SNMP Traps
Save and reload config files, Boot code and firmware update via HTML upload, Automatic update via update server
Order number
01-06010-001
Datenblatt
innovaphone IP6010
VoIP-Gateway mit vier S2M-Schnittstellen für innovaphone PBX und Linux Application Platform
Gehäuse
Abmessungen: 210 x 184 x 32 mm eine Höheneinheit für 19“ Systeme
Gewicht: 1050 g
Schnittstellen
4 x S2M-Schnittstellen: TE oder NT-Modus für Einschleifbetrieb, zusätzliche „Power-off-Loop“ schaltet jeweils 2 ISDN PRI im stromlosen Zustand durch, insgesamt 60 Kanäle
1 x S0-Schnittstelle: ISDN-Anschluss für Routing, Admin, Synchronisation, Backup o.ä. TE- oder NT-Modus
2 x Ethernet: RJ 45 Schnittstelle 10/100-BASE-TX (auto negotiation) mit „Power over Ethernet“ nach 802.3af, Class 3
Aufnahmeschacht für eine Compact Flash-Karte Typ I
Hardware
Stromversorgung: Power over Ethernet nach 802.3af, Class 3
Leistungsaufnahme: siehe Wiki-Artikel „HowTo:Power Consumption“
Digital Signal Processor (DSP) für Sprachverarbeitung bis zu 60 Kanäle
2 HDLC Kanäle
512 MB SDRAM, 32 MB Flash
Betriebstemperatur: 0 °C bis +45 °C
Luftfeuchtigkeit: 10% bis 90% (nicht kondensierend)
Lagertemperatur: -10 °C bis +70 °C
innovaphone PBX
Plattform für bis zu 3200 Registrierungen resp. 1000 myPBX Nutzer
Konferenzserver für bis zu 60 Teilnehmer
Linux Application Platform
für Zusatzapplikationen wie Reporting, Faxserver und Exchange-Kalenderanbindung
VoIP-Protokolle
H.323 Version 5
H.323 über UDP, TCP, TLS
SIP Version 2 konform RFC 3261
SIP über UDP, TCP, TLS
RTP, SRTP, RTCP
T.38 (Fax, unterstützte Raten 9.6k und 14.4k)
Sprach-Codecs
G.711 A-law / µ-law, G723.1 (53), G.729A
VAD (Voice Activity Detection), CNG (Comfort Noise Generation)
Dynamic Jitter Buffering
Echo Kompensation nach G.168
Modemunterstützung
Netzwerk
PPPoE-Protokoll, manueller / automatischer Verbindungsaufbau nach Start
PPTP bis zu 32 Tunnel parallel, Verschlüsselung mit MPPE
NAT, H.323-NAT
RSTP, IEEE 802.1x
VLAN-ID nach IEEE 802.1q
DHCP und LLDP/MED Unterstützung
NTP Unterstützung
ISDN
Routing VOIP-ISDN, ISDN-ISDN, VOIP-VOIP
Automatische Rufton-Generierung nach Europäischem- und US-Standard
ENUM für H.323 und SIP Einträge
Einspielen von Ansagen, die als Datei auf CF-Karte oder einem Webserver hinterlegt sind
Protokolle EDSS1, QSIG, T1-CAS, E1-CAS
Administration
Passwortgeschützter Zugriff über Web-Browser, Kerberos-Server
Log- und Trace-Dateien, Statusanzeigen
Ping – Verbindungstest, Senden von SNMP-Traps
Speichern und Einlesen der Konfiguration, Aktualisierung Boot-Code und Firmware über HTML-Upload, Automatische Aktualisierung über Update-Server
Bestellnummer
01-06010-001
CE-Declarations
Conformities
{{{1}}}
WEEE-Number
innovaphone WEEE-Number
DE 31703754