IP1130 Technical Data EN: Difference between revisions

From innovaphone wiki
Jump to navigation Jump to search
No edit summary
(No difference)

Revision as of 12:19, 5 April 2016

innovaphone® AG | Umberto-Nobile-Str. 15 | 71063 Sindelfingen | Germany | T +49 7031 73009-0 | F +49 7031 73009-9 | info@innovaphone.com | www.innovaphone.com
Errors, delivery times and technical specifications may be subject to change. Copyright © 2023 innovaphone® AG

Illustration

IP1130.png

Datasheet

innovaphone IP1130

Media Gateway for one ISDN PRI interface plus reverse proxy and SBC functionalities

Firmware

Device operated with Version 11r2sr10 or higher

Housing

Size: 210 x 148 x 32 mm

one height unit (HU) for 19” systems

Weight: 1050 g

Interfaces

1 x PRI-interface (S2M): for connection of ISDN-PRI-trunkline, use on E1 or T1 lines, RJ-45 (modular Jack 8P8C), TE or NT mode operation


2 x Gigabit Ethernet: 1000-BASE-T (auto negotiation), RJ-45 (modular Jack 8P8C)

„Power over Ethernet“ according to IEEE 802.3af, Class 3

Energy Efficient according to IEEE 802.3az

Hardware

Power supply: Power over Ethernet according to IEEE 802.3af, Class 3


800 MHz CPU, 0.25 GB RAM, 32 MB Flash


Operation temperature: 0 °C to +45 °C

Humidity: 10% to 90% (not condensed)

Storage temperature: -10 °C to +70 °C


Digital Signal Processor (DSP) for up to 30 voice/audio conference channels

Seven channels for the innovaphone faxserver using T.38 or via G.711. In case of G.711, each faxtransmission consumes 2 DSP channels.

Voice Codecs

G.711 A-law / µ-law,

G.722,

G.723.1 (5.3),

G.729A and

Opus-NB

incl. VAD (Voice Activity Detection), CNG (Comfort Noise Generation)

Dynamic Jitter Buffering

Echo cancellation according to G.168

Modem support

Generic Features

generic features V11 innovaphone gateways

generic features V12 innovaphone gateways

Order number

01-01130-001

Datenblatt

innovaphone IP1130

Media-Gateway für einen ISDN-S2M Anschluss sowie Reverse Proxy und SBC Funktionalitäten

Firmware

Gerät betreibbar mit Version 11r2sr10 oder höher

Gehäuse

Gehäuse

Abmessungen: 210 x 148 x 32 mm

eine Höheneinheit (HE) für 19“ Systeme

Gewicht: 1050 g

Schnittstellen

1 x S2M-Schnittstelle (PRI): für Anschluss an ISDN-S2M-Amtsleitungen, Nutzung an E1 oder T1 Verbindungen, RJ-45 (modular Jack 8P8C), TE oder NT Betrieb


2 x Gigabit-Ethernet: 1000-BASE-T (auto negotiation), RJ-45 (modular Jack 8P8C)

„Power over Ethernet“ nach IEEE 802.3af, Class 3

Energy Efficient nach IEEE 802.3az

Hardware

Stromversorgung: Power over Ethernet entsprechend IEEE 802.3af, Class 3


800 MHz CPU, 0.25 GB RAM, 32 MB Flash


Betriebstemperatur: 0 °C bis +45 °C,

Luftfeuchtigkeit: 10% bis 90% (nicht kondensierend)

Lagertemperatur: -10 °C bis +70 °C


Digitaler Signalprozessor (DSP) für bis zu 30 Sprach/Konferenzkanäle

7 Kanäle für den innovaphone Faxserver mit T.38 oder über G.711. Im Falle von G.711 werden bei pro Faxübertragung 2 DSP-Kanäle belegt.

Sprach Coder

G.711 A-law / µ-law,

G.722,

G.723.1 (5.3),

G.729A und

Opus-NB

mit VAD (Voice Activity Detection), CNG (Comfort Noise Generation)

Dynamic Jitter Buffering,

Echo Kompensation: G.168

Modemunterstützung

Allgemeine Leistungsmerkmale

allgemeine Leistungmerkmale V11 innovaphone Gateways

allgemeine Leistungmerkmale V12 innovaphone Gateways

Bestellnummer

01-01130-001

CE-Declarations

Conformities

{{{1}}}

{{{2}}}

WEEE-Number

innovaphone WEEE-Number

DE 31703754