IP38 Technical Data EN: Difference between revisions
m (IP38 Features moved to IP38 Features EN) |
|
(No difference)
|
Revision as of 14:26, 6 April 2016
innovaphone® AG | Umberto-Nobile-Str. 15 | 71063 Sindelfingen | Germany | T +49 7031 73009-0 | F +49 7031 73009-9 | info@innovaphone.com | www.innovaphone.com
Errors, delivery times and technical specifications may be subject to change. Copyright © 2023 innovaphone® AG
Illustration
Datasheet
innovaphone IP38
VoIP-Gateway for eight analog trunk lines and platform for innovaphone PBX
Housing
Size: 210 x 144 x 32 mm 1 HE for 19” systems
Weight: 660 g
Interfaces
1 x Ethernet: RJ 45 interface 10/100-BASE-TX (auto negotiation), Power over Ethernet (802.3af, Class 1)
8 x a/b interface, FXO, international RJ-11, two PINs in the middle used
Hardware
Power supply:
Power over Ethernet (802.3af, Class 1) or external power supply
Power Consumption: see wiki-article „HowTo:Power Consumption“
Digital Signal Processor (DSP) for codecs up to eight voice channels
32 MB SDRAM, 16 MB Flash
Operation temperature: 0 °C to +45 °C
Humidity: 10% to 90% (not condensed)
Storage temperature: -10 °C to +70 °C
innovaphone PBX
Platform for up to 50 registrations resp. 15 myPBX clients
VoIP protocols
H.323 Version 5
H.323 over UDP, TCP, TLS
SIP Version 2 conform RFC 3261
SIP over UDP, TCP, TLS
RTP, SRTP, RTCP
T.38 (Fax)
CLIP
Voice Codecs
G.711 A-law / µ-law, G723.1 (5.3), G.729A
VAD (Voice Activity Detection), CNG (Comfort Noise Generation)
Dynamic Jitter Buffering
Echo Compensation: G.168
Data modem support
Network
PPPoE, manual or automatic connection after boot
PPTP Tunneling up to 32 tunnels simultaneously, encoding via MPPE
NAT, H.323-NAT
RSTP, IEEE 802.1x
VLAN-ID acc. to IEEE 802.1q
DHCP and LLDP/MED support
NTP support
Administration
Password protected administration via web-browser, Kerberos server
Log and trace files, Display of interface and connection status, Ping – connection test for Internet Protocol, Sending SNMP Traps
Save and reload config files, Boot code and firmware update via HTML upload, Automatic update via update server
Supplementary services
- Calling Line Identification
- DTMF tone generation
- Separate volume settings for external devices
- Detection of dialtones
- Detection of busy tones
- Detection of ringing tones and ringing currents
Order number
01-00038-001
Datenblatt
innovaphone IP38
VoIP-Gateway für acht analoge Amtsanschlüsse und Plattform für die innovaphone PBX
Gehäuse
Abmessungen: 210 x 144 x 32 mm eine Höheneinheit für 19“ Systeme
Gewicht: 660 g
Schnittstellen
1 x Ethernet: RJ 45 Schnittstelle 10/100-BASE-TX (auto negotiation) mit „Power over Ethernet“ nach 802.3af, Class 1
8 x a/b Schnittstellen (FXO): für einen Anschluss von jeweils einem RJ-11 Stecker pro analogem Kanal, Belegung auf den mittleren PINs
Hardware
Stromversorgung:
Power over Ethernet nach 802.3af, Class 3 oder Steckernetzteil
Leistungsaufnahme: siehe Wiki-Artikel „HowTo:Power Consumption“
Digital Signal Processor (DSP) für Sprachverarbeitung bis zu 8 Kanäle
32 MB SDRAM, 16 MB Flash
Betriebstemperatur: 0 °C bis +45 °C
Luftfeuchtigkeit: 10% bis 90% (nicht kondensierend)
Lagertemperatur: -10 °C bis +70 °C
innovaphone PBX
Plattform für bis zu 50 Registrierungen resp. 15 myPBX Nutzer
VoIP-Protokolle
H.323 Version 5
H.323 über UDP, TCP, TLS
SIP Version 2 konform RFC 3261
SIP über UDP, TCP, TLS
RTP, SRTP, RTCP
T.38 (Fax)
CLIP
Sprach-Codecs
G.711 A-law / µ-law, G.723.1 (5.3), G.729A
VAD (Voice Activity Detection), CNG (Comfort Noise Generation)
Dynamic Jitter Buffering
Echo Kompensation: G.168
Modemunterstützung
Netzwerk
PPPoE-Protokoll, manueller / automatischer Verbindungsaufbau nach Start
PPTP bis zu 32 Tunnel parallel, Verschlüsselung mit MPPE
NAT, H.323-NAT
RSTP, IEEE 802.1x
VLAN-ID nach IEEE 802.1q
DHCP und LLDP/MED Unterstützung
NTP Unterstützung
Administration
Passwortgeschützter Zugriff über Web-Browser, Kerberos-Server
Log- und Trace-Dateien, Statusanzeigen
Ping – Verbindungstest, Senden von SNMP-Traps
Speichern und Einlesen der Konfiguration, Aktualisierung Boot-Code und Firmware über HTML-Upload, Automatische Aktualisierung über Update-Server
Leistungsmerkmale
- Rufnummernidentifizierung
- DTMF Ton Generierung
- separate Lautstärkeeinstellung für extern angeschlossene Geräte
- Erkennung von Wahlbereitschaftstönen
- Erkennung von Besetzttönen
- Erkennung von Klingeltönen und Klingelspannungen
Bestellnummer
01-00038-001
CE-Declarations
Conformities
{{{1}}}
WEEE-Number
innovaphone WEEE-Number
DE 31703754