Howto:Innovaphone Phones on FritzBox: Difference between revisions
Jump to navigation
Jump to search
Line 28: | Line 28: | ||
If this is changed by user or manufacturer, configuration below has to be adapted. | If this is changed by user or manufacturer, configuration below has to be adapted. | ||
Control of MWI-LED and voicemail access via function key requires definition of both number and name as follows: | Control of MWI-LED and voicemail access via function key requires definition of both number '''and''' name as follows: | ||
* Number: <FritzBox-VM>@fritz.box - default **600@fritz.box ; do NOT tick Append Own Number | * Number: <FritzBox-VM>@fritz.box - default **600@fritz.box ; do NOT tick Append Own Number | ||
* Name: <username>@fritz.box | * Name: <username>@fritz.box |
Revision as of 10:56, 21 March 2018
Applies To
This information applies to
innovaphone IP Phones User Configuration for registering on FritzBox
More Information
Configuration FritzBox User
Configurate a User on FritzBox like this:
Configuration innovaphone User Config
Configurate innovaphone User like this:
Configuration Message Waiting Key
innovaphone phones support RFC 3842 which defines SIP based message waiting procedure.
This enables definition and use of message waiting function key and lamp to access FritzBox-built-in voicemail service.
By default, FritzBox-VM owns number **600. Any further described configuration assume this as default. If this is changed by user or manufacturer, configuration below has to be adapted.
Control of MWI-LED and voicemail access via function key requires definition of both number and name as follows:
- Number: <FritzBox-VM>@fritz.box - default **600@fritz.box ; do NOT tick Append Own Number
- Name: <username>@fritz.box