Howto:Power Consumption

Supply via Power over Ethernet (PoE)

Power level

The power consumption of PoE devices is separated into several classes for power sourcing equipment (PSE) and the powered device (PD).

Class	Usage	Power level PSE [W]	Power level PD [W]
0	default	15,4	0,44 - 12,95
1	optional	4	0,44 - 3,84
2	optional	7	3,84 - 6,49
3	optional	15,4	6,49 - 12,95
4	optional	30	12,95-25,5 W (802.3at/Typ 2)

Power level of innovaphone devices

Gateways:

Device	PoE-Class	average total input power [mW]*	max total input power [mW]*
IP22	3	3000	4600
IP24	3	3600	6800
IP28	3	4000	12900
IP38	1	2800	3800
IP302	3	3000	4800
IP305	2	2900	3000
IP800 up to HW201	0
IP800 ex HW300	3	4700	10500
IP2000	3	5900	6500
IP6000	3	9800	10000
IP1200	0	5000	8000
IP1202/IP1203	2		5000
IP0010	3	8000	12500
IP3010	3	8000	12500
IP6010	3	8000	12500
IP1060	3	8000	12500
IP810	3	8000	12500
IP311/IP411/IP811/IP29/IP0011	3	5000	12500
IP1130/IP3011	3	8000	12500
IP29-2/4/8	3	May vary in dependency of FXS usage.	12500
IP29-20	4	May vary in dependency of FXS usage.	25500
IP6013	4	n.a.	25500

Phones:

Device	PoE-Class	idle state [mW]****	average total input power [mW]*	max total input power [mW]*	manufacturing check [mW]**
IP110	1		2500	2700	3500
IP200A	1		2900	3200	3500
IP230	2		2600	2900	3500
IP240	2		3100	3800	4000
IP150	1		2800	3000	3500
IP240-1000	2		4900	5900	6500
IP230-x	extension module		1000	1000
IP241	HW < 402 = 3 HW >= 402 = 2	2400	< 3500
IP222	2	2500	4800***
IP232	2	2600	4900***
IP111(A)	1	1400	2000	3800	2500
IP112(A)	2	1800	2100	4000	2500
IP101	1			2000
IP102	2			3500

*These values were averaged results from simulating normal and maximum use. 
 To have an official max total input power value please orientate on the upper limit of the associated PoE class.

**All devices leaving the manufacturing process are checked whether the cunsumption is under this value.

***LAN and PC interface connected with 1Gbit/s. 4xUSB connected (only IP2x2).

****LAN connected with 100Mbit/s. PC not connected. EEE active if supported. LCD light (idle state) == 0

Estimated worst case power consumption for operation of a 240-1000 with 3 IP230-X

5.9W +3*1W= 8.9W

Estimated worst case power consumption for operation of a 240 with 3 IP230-X

3.8W +3*1W= 6.8W

PoE Injector Capacity

All PoE injectors offered by innovaphone (order code 03-00010-228 and 03-00010-231) fullfill the power demand PoE capable innovaphone devices need (generally 15W at PSE side). This is good for any device up to PoE class 3.

Supply via Power Supply Unit (PSU)

Most of the innovaphone devices can be supplied by an external PSU (exception: IP800; IP2000; IP6000 with build in power supply). All testreadings were determined by measuring the power consumption of the PSU. They are no official numbers. The following tables are showing different phone modes. All values in mW.

12V PSU for phones

Without using switch functionality (only LAN is connected 100Mbit/s):

Device	Standby	On-Hook	Active (handsfree with max loudness)	Ringing
IP110	2900	3000	3400	3000
IP200A	3400	3500	3900	3500
IP230	3000	3300	3500	3300
IP240	3400	3700	3800	3700
IP240-1000	5200	5500	5700	5500
IP241	< 3500
IP222	2500
IP232	2600

Using switch functionality (PC + LAN is connected 100Mbit/s):

Device	Standby	On-Hook	Active (handsfree with max loudness)	Ringing
IP110	3300	3400	3700	3400
IP200A	3900	3900	4400	3900
IP230	3400	3600	3800	3600
IP240	3800	4100	4200	4100
IP240-1000	7400	7700	7900	7700
IP241	4500***
IP222	4200***
IP232	4300***

Use of extension modules

• IP230/IP24x plus up to three IP230-X: a more efficient PSU is needed. Please use the 40V Gateway PSU or PoE injector from innovaphone (order no 03-00010-231)
• IP2x2 plus up to two IP2x2x: same as above - a more efficient PSU is needed. Please use the 40V Gateway PSU or PoE injector from innovaphone (order no 03-00010-231)
• IP2x2 plus one IP2x2x: POE Class 2 is sufficient if no other USB loads are present

40V PSU for IP adapters and gateways

Note as of May 2018: This product is End-of-life and no more offered by innovaphone.

The 40V PSU (order no. 03-00010-226) can be used for all gateways and adapters with small housing. In detail these are IP22, IP24, IP28, IP38, IP302 and IP305.

Releated notes

Heat output (BTU)

Sometimes we receive inquiries about the heat output (BTU - British Thermal Unit) of our devices.

innovaphone itself does not provide any information about this.

With afore mentioned power consumption values (! units are in mW) and corresponding converters (e.g. here), the BTU can be calculated on your own responsibility.