Howto:Messaging with IP Phones: Difference between revisions

From innovaphone wiki
Jump to navigation Jump to search
No edit summary
Line 21: Line 21:
At least 2 innovaphone Telephones H.323/SIP registered at innovaphone PBX.
At least 2 innovaphone Telephones H.323/SIP registered at innovaphone PBX.


==Configuration==
==Usage==


Activate messaging through command line interface (http or usbload interactive)
===Sending messages through Messages Menu===
 
#  In Main Menu, go to "Messages" submenu
  <nowiki>http://x.x.x.x/!config change PHONE USER /text-messaging</nowiki>
#  Choose "New Message"
  <nowiki>http://x.x.x.x/!config write</nowiki>
# Type in the destination number (alias) in the top-most entry field
  <nowiki>http://x.x.x.x/!config activate</nowiki>
# Type message
 
# Send by pressing Menu/Send key
'''Note:''' Messaging has to be activated on both (sending/receiving) phones.
#  Popup screen informs if the message has been sent sucessfully
 
==Usage==


===Sending messages===
===Sending messages through prepared Dial===
#  Type destination number or H.323/SIP alias
#  Type destination number or H.323/SIP alias
#  Press Menu key - New Message
#  Press Menu key - "Send Message"
#  Type message
#  Type message
#  The destination number (alias) can be edited in the topmost entry field
#  The destination number (alias) can be edited in the top-most entry field
#  Send by pressing Menu/Send key
#  Send by pressing Menu/Send key
#  Popup screen informs if the message has been sent sucessfully
#  Popup screen informs if the message has been sent sucessfully


'''Notes:'''
===Receiving messages===
* The message is currently not stored in a Sent-Messages list
# In idle mode, the incoming message is being displayed on a screen. Special message ring tone is played. Pressing any key stops the ring. The message sending party can be called back by pressing the hook key.
# With at least one connected call, the incoming message number/alias is displayed in the status line. Special intrusion tone is played. The missed message counter is incremented.
# In dialing and ringing states, the message is received silently. The missed message counter is incremented.


===Receiving messages===
===Managing incoming messages===
# In idle mode, the incoming message is being displayed on a screen. Special message ring tone is played.
# In Main Menu, go to "Messages" submenu
# In active mode, the incoming is being displayed on a screen. Special intrusion tone is played.
#  Choose "Messages (incoming)" subemnu
# Pressing any key stops the ring. The message sending party can be called back by pressing the hook key.
##  The missed messages counter is resetted upon enetering this menu
# Scroll up and down in the chronologically sorted list, activate messages to see the text
## The message sending party can be called back by pressing the hook key.
# Invoke Action key, from here:
## The sending party number can be used as a prepared dial string ("Indirect dialling")
## An answer to the sending party can be sent ("Reply Message")
## Delete this message
## Delete all messages


===Managing messages===
===Managing outgoing messages===
#  Navigate to Menu-Call Lists-Messages (incoming)
#  In Main Menu, go to "Messages" submenu
#  Activate messages to see the text
#  Choose "Messages (outgoing)" subemnu
# The message sending party can be called back by pressing the hook key.
##  The missed messages counter is resetted upon enetering this menu
# Invoke Action key, from here:
#  Scroll up and down in the chronologically sorted list, activate messages to see the text
## The sending party number can be used as a prepared dial string
## The message sending party can be called back by pressing the hook key.
## An answer to the sending party can be sent
# Invoke Action key, from here:
## The sending party number can be used as a prepared dial string ("Indirect dialling")
## The message can be resent (not immediately, but being used as a template in the first step) ("Send Message")
## Delete this message
## Delete this message
## Delete all messages
## Delete all messages
Line 62: Line 71:
# Navigate thorough main menu to User List -> User -> Ring Melody -> Ring Melody (ring)
# Navigate thorough main menu to User List -> User -> Ring Melody -> Ring Melody (ring)
# Configure the ring tone and save changes by pressing the Menu button
# Configure the ring tone and save changes by pressing the Menu button
==Known Problems==
* Some older PBX versions caused problems with H.323 based registrations, change the registration to use SIP or upgrade the PBX firmware




Revision as of 18:43, 27 May 2008

Applies To

This information applies to

  • IP200, IP202, IP110, IP200A, IP230, IP72
  • innovaphone PBX
  • V6SR2

Build 08-60900.18 and later.


More Information

Latest innovaphone builds contain an initial messaging implementation. The basic idea is the ability to send and receive messages using innovaphone telephones. Interoperability with other 3rd party messaging systems and GSM - SMS service is in the first step not an issue. This may be addressed afterwards.

For Messaging Server (Avics) messaging mode, see Howto:Innovaphone_Messaging_Server_Interface.

System Requirements

At least 2 innovaphone Telephones H.323/SIP registered at innovaphone PBX.

Usage

Sending messages through Messages Menu

  1. In Main Menu, go to "Messages" submenu
  2. Choose "New Message"
  3. Type in the destination number (alias) in the top-most entry field
  4. Type message
  5. Send by pressing Menu/Send key
  6. Popup screen informs if the message has been sent sucessfully

Sending messages through prepared Dial

  1. Type destination number or H.323/SIP alias
  2. Press Menu key - "Send Message"
  3. Type message
  4. The destination number (alias) can be edited in the top-most entry field
  5. Send by pressing Menu/Send key
  6. Popup screen informs if the message has been sent sucessfully

Receiving messages

  1. In idle mode, the incoming message is being displayed on a screen. Special message ring tone is played. Pressing any key stops the ring. The message sending party can be called back by pressing the hook key.
  2. With at least one connected call, the incoming message number/alias is displayed in the status line. Special intrusion tone is played. The missed message counter is incremented.
  3. In dialing and ringing states, the message is received silently. The missed message counter is incremented.

Managing incoming messages

  1. In Main Menu, go to "Messages" submenu
  2. Choose "Messages (incoming)" subemnu
    1. The missed messages counter is resetted upon enetering this menu
  3. Scroll up and down in the chronologically sorted list, activate messages to see the text
    1. The message sending party can be called back by pressing the hook key.
  4. Invoke Action key, from here:
    1. The sending party number can be used as a prepared dial string ("Indirect dialling")
    2. An answer to the sending party can be sent ("Reply Message")
    3. Delete this message
    4. Delete all messages

Managing outgoing messages

  1. In Main Menu, go to "Messages" submenu
  2. Choose "Messages (outgoing)" subemnu
    1. The missed messages counter is resetted upon enetering this menu
  3. Scroll up and down in the chronologically sorted list, activate messages to see the text
    1. The message sending party can be called back by pressing the hook key.
  4. Invoke Action key, from here:
    1. The sending party number can be used as a prepared dial string ("Indirect dialling")
    2. The message can be resent (not immediately, but being used as a template in the first step) ("Send Message")
    3. Delete this message
    4. Delete all messages

Managing the message ring tone

  1. Navigate thorough main menu to User List -> User -> Ring Melody -> Ring Melody (ring)
  2. Configure the ring tone and save changes by pressing the Menu button
Retrieved from "https://wiki.innovaphone.com/index.php?title=Howto:Messaging_with_IP_Phones&oldid=9753"