All public logs

Combined display of all available logs of innovaphone wiki. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).

16:38, 4 September 2024 Mpu talk contribs deleted page Howto:How can I find application which converts promts and music files to the needed format like g729, g711 etc? (content was: "please go to the related articel below == Related Articles == [http://wiki.innovaphone.com/index.php?title=Howto:How_to_convert_wave_files_in_to_G7xx_coder_files_for_the_HTTP_interface how to convert wav files in to G7xx] {{PAGENAME}}", and the only contributor was "Tsr" (talk))
16:37, 4 September 2024 Mpu talk contribs deleted page Howto:How can I explicitly cancel a certain call in the gateway that is indicated via Gateway/Calls or PBX/Calls menu? (content was: "'''FAQ:''' How can I explicitly cancel a certain call in the gateway that is indicated via Gateway/Calls or PBX/Calls menu? '''Answer:''' There is no possibility at the moment. Aberrant calls which are connected between unreachable endpoints, like two external calls which had been transferred together, can only be removed by a reboot. == Related Articles == <!--*Main_Page|wiki-in...", and the only contributor was "Afi" (talk))
16:37, 4 September 2024 Mpu talk contribs deleted page Howto:How can I access unreleased soft- and firmware (a.k.a. hotfixes)? (content was: "==More Information== All available download material, released or unreleased, can be found at the innovaphone download page. Refer to section Related External Links. == Related External Links == [http://download.innovaphone.com innovaphone download page]  {{PAGENAME}}")
15:34, 2 September 2024 Mpu talk contribs deleted page Howto:Do you have a Windows CE and windows mobile (5) version of your softphone client? (content was: "'''FAQ:''' Do you have a Windows CE and windows mobile (5) version of your softphone client? '''Answer:''' No, it has been discontinued for the following reasons: # Battery-lifetime with WLAN turned on (disabled sleep mode) about 2 hours only (iPaq 41xx) # Without headset, the other endpoint will experience really bad and annoying echo. We should port our acoustic echo canceler to ARM which could be a problem with 400MHz. # WindowsCE 4.20 does not support bluetooth headsets...")
15:28, 2 September 2024 Mpu talk contribs deleted page Howto:Do you recommend any optical signalling devices for people with impaired hearing? (content was: "'''FAQ:''' Do you recommend any optical signalling devices for people with impaired hearing? '''Answer:''' innovaphone does not have recommended products in this area. For more information on available solutions, check the vendor sites below or search the web for '''SIP flashlight''' == External Links == * [http://www.trizwo.de/voipio/ Voipio] * [http://www.humantechnik.com Humantechnik] * [http://www.ghe.ch/ghe/e/default-e_mf.asp ghe-ces electronic ag] * [http://www.telc...")
15:27, 2 September 2024 Mpu talk contribs deleted page Howto:DECT solution using CallManager (content was: "The IP1200 and the IP1500 can communicate directly to Cisco's CM using Skinny. This setup '''is not supported''' by innovaphone. If one of your customers needs this solution, please contact [http://www.kirktelecom.com Kirk Telecom], since they support/sell this solution. {{PAGENAME}}", and the only contributor was "Sga" (talk))
15:22, 2 September 2024 Mpu talk contribs deleted page Howto:Can innovaphone be integrated with Lotus Sametime? (content was: "Compatibility has been reported between innovaphone PBX and ilink's Sametime solution ''ilink CTI''. ==Applies To== This information applies to * innovaphone PBX V7.0 and later * TAPI soap-appl/tapi/5.00 08-5992 and later The solution has not been tested against the new V7 TAPI driver. <!-- Keywords: CTI Plug-in IOC Click-to-dial TeamCallAudio Conference Konferenzbrücke multipoint V...", and the only contributor was "Ckl" (talk))
15:21, 2 September 2024 Mpu talk contribs deleted page Howto:CTI for Apple Mac OS and Innovaphone (content was: "'''FAQ:''' I have an innovaphone IP800, and Id like to know if you have or you know some software like innovaphone PBX Operator, IXI-Call for Mac OS? '''Answer:''' For MAC OS software integration into innovaphone enviroment contact: :Ingenieurbüro Sauerzapf :An der Fahrt 2 :55124 Mainz : :Tel.: +49 6131 9719302 :Fax: +49 6131 9719307 :eMail: maccti@netdoc.de (oder juergen@sauerzapf.name) : : :[http://www.maccti.eu/31.0.html MacCTI]  ...")
15:20, 2 September 2024 Mpu talk contribs deleted page Howto:CE-Declarations (content was: "Where can i find innovaphone's gateway and telephone declarations of conformity (CE Declaration)? ==Applies To== This information applies to * All innovaphone gateways and telephones ==More Information== The "declarations of conformity" (CE Declaration) can be found here: http://download.innovaphone.com/pub/6.00 .  {{PAGENAME}}", and the only contributor was "Gpa" (talk))
15:19, 2 September 2024 Mpu talk contribs deleted page Howto:Bluetooth Headsets hissing on the other side? (content was: "This short document explains what to do when Bluetooth Headsets hissing on the other side. ==Applies To== This information applies to * SoftwarePhone, V5.01 build 04-5667 and later. ==More Information== ===System Requirements=== In case of hissing problems with bluetooth headsets please don’t use and load up your headset at the same time. This is forbidden in most headset user manua...", and the only contributor was "Gpa" (talk))
15:17, 2 September 2024 Mpu talk contribs deleted page Howto:Are there special IP21 analogue telephone adapters for Switzerland? (content was: "No, if pin assignment differs from the standard assignment, a special cable has to be crimped. {{PAGENAME}}", and the only contributor was "Ckl" (talk))
15:17, 2 September 2024 Mpu talk contribs deleted page Howto:Are there headsets recommended for the IP200 or Software Phone? (content was: "There are many excellent headsets in the market and product suitability varies with customer requirements. However, we have worked with some headsets of GN-Netcom and found them to be quite good. We especially did use the GN2100 (which is a "normal" headset) and the GN9020 which features wireless, DECT based operation. For use with the IP200, just order an "innovaphone IP200 kit". For use with the Software Phone, the optional USB support GN8110 is useful. In Germany,...")
15:15, 2 September 2024 Mpu talk contribs deleted page Howto:Are there any known problems with Asterisk drivers in OpenH323 gateways? (content was: "Disabling faststart won’t work with the Asterisk gateways. Only one media channel will be established without faststart! {{PAGENAME}}", and the only contributor was "Afi" (talk))
15:15, 2 September 2024 Mpu talk contribs deleted page Howto:Are 'Call Accept keys' supported for Bluetooth headsets? (content was: "This short document explains if ‘Call Accept keys’ are supported for Bluetooth headsets ==Applies To== This information applies to * SoftwarePhone, V5.01 build 04-5667 and later. ==More Information== ===Problem Details=== No, ‘Call Accept keys’ are not supported.  {{PAGENAME}}", and the only contributor was "Gpa" (talk))
15:14, 2 September 2024 Mpu talk contribs deleted page Howto:A while ago i found a publication by Innovaphone called Understanding and Selling IP Telephony. Is it possible to access this doc online? (content was: "'''FAQ:''' Hi, A while ago i found a publication by Innovaphone called Understanding and Selling IP Telephony, (in association with Comms. Business magazine. Back in the day this document was found to be very useful. Is it possible to access this doc online?? '''Answer:''' It is useful indeed ;-) Unfortunately, there is no online version at all. However, you may order a hardcopy from...", and the only contributor was "Sga" (talk))
15:12, 2 September 2024 Mpu talk contribs deleted page Howto:I want to send log information from internal calls. I now how to read logs, but how i get these internal calls send information to log? (content was: "Up to and including version 6 service release 1 (V6 sr1), CDRs are only sent by the RELAY component, which is the gateway routing controlled be the applets voice routes. This will change along version 6 service release 4 (V6 sr4 ) For now, to learn about intra-PBX calls, you will need to set up a SOAP client (cf. the PBX SOAP Api). {{PAGENAME}}", and the only contributor was "Tsr" (talk))
15:08, 2 September 2024 Mpu talk contribs deleted page Howto:How to register a V6 IP200 with a V6 PBX via SIP (content was: "To register an V6 IP200 with a V6 pbx via SIP, you need to configure the PBX's IP address as "Server address" and the "Name" configured in the PBX as "Name" (alternatively, you can use the configured "Number" as Number or use both Number and Name). Also, you will need to configure the PBX's gatekeeper id as "Domain/Realm". {{PAGENAME}}", and the only contributor was "Tsr" (talk))
15:07, 2 September 2024 Mpu talk contribs deleted page Howto:In which way can I a route with a timeout value? In V5 firmware there is a timeout field but in V6 I dont find It. Thanks. (content was: "This function is obsolete, please use V6 PBX Features for those purposes.  {{PAGENAME}}", and the only contributor was "Gpa" (talk))
09:45, 28 August 2024 Mpu talk contribs deleted page Howto:Can I use just any HTTP server to stream PBX announcements to the waiting queue, or does it have to be IIS? (content was: "#REDIRECT Howto:Can I use just any HTTP server to stream PBX announcements to the waiting queue, or does it have to be IIS", and the only contributor was "Tfu" (talk))
14:38, 23 August 2024 Mpu talk contribs deleted page Howto:I want to program some "short numbers" in my ip800 (ex : 8000 calls 0032479445656). Im sure the routing table isnt the only place were i can do this ? (content was: "'''FAQ:''' Hi all , i want to program some "short numbers" in my ip800 (ex : 8000 calls 0032479445656). Im sure the routing table isnt the only place were i can do this , probably the ldap-server is the answer but im not sure. Has anyone implemented this kind of "short dial list" ? Thanks , John '''Answer:''' You would rather use the Number MAP object in the PBX. The idea is to create a...", and the only contributor was "Sga" (talk))
14:38, 23 August 2024 Mpu talk contribs deleted page Howto:Can IP800 with v.6 firmware support MGCP protocol? (content was: "Well, yes and no. ==V6== We have implemented (amongst other protocols) MGCP server side to support MGCP based endpoints (a.k.a telephones). However, such telephones are rare and the only one we have ever come across is not recommended by us. Moreover, supporting MGCP for telephones requires some individual tweaking for each model, so other models may work somehow, but will not satisfy customer requirements most likely. We have never tested MGCP gateways and I doubt that t...")
14:58, 22 August 2024 Mpu talk contribs deleted page Howto:Can your phone show you a wrong missed call, ie the person hasnt called you but a missed call is shown on phone. (content was: "'''FAQ:''' Can your phone show you a wrong missed call, ie the person hasnt called you but a missed call is shown on phone? '''Answer:''' Missed calls could only be made by calls. That means a h323 registration has to setup a call to another registration. If the first registration is a phone or a application doesn't matter. == Related Articles == <!--*wiki-innovaphone--...", and the only contributor was "Afi" (talk))
14:58, 22 August 2024 Mpu talk contribs deleted page Howto:Can the analog adapters IP21 (and coming new products) send CLI information to analog device? (content was: "The IP21 supports CLIP towards the analog device. You will need to use recent firmware for this to work. Upcoming analog adapters (IP2x) will support this too. {{PAGENAME}}", and the only contributor was "Sga" (talk))
14:56, 22 August 2024 Mpu talk contribs deleted page Howto:Can i configure time based routes in v5? (content was: "Can I configure in your gateway (e.g. IP800) a "time of day" routes? My target is to a time of day routes to different locations based on the time of day when a call is made. For example, during business hours, calls can route to an office, and after hours, calls can go directly to a voice-messa ==Applies To== This information applies to * all innovaphone gateways All Version 5 builds. ==More Information== No this is not possible, but with '''V6''' you can make based on time...")
14:55, 22 August 2024 Mpu talk contribs deleted page Howto:Can i add a route to a specific ISDN channel? (content was: "'''FAQ:''' Can i add a route to a specific ISDN channel? For example from GW1 to TEL1-L1 or TEL1-L2. '''Answer:''' No, there is no way to address the channel in our ISDN implementation (and there is rarely a need for it). With primary rate interfaces, you can configure the allocation strategy (bottom up or top down). also, in CAS, when used in channel bank mode, there is a feature to m...", and the only contributor was "Afi" (talk))
14:54, 22 August 2024 Mpu talk contribs deleted page Howto:Can I use just any HTTP server to stream PBX announcements to the waiting queue, or does it have to be IIS (content was: "'''FAQ:''' Can I use just any HTTP server to stream PBX announcements to the waiting queue, or does it have to be IIS? '''Answer:''' The type of web server doesn't matter, as long as it performs as follows: * for streaming of announcements, the server must support HTTP GET requests * for storing audio streams and to use the save/backup functions of the update server mechanism, the server must support HTTP put requests * for the voice mail, the server must support WebDav (wh...")
14:53, 22 August 2024 Mpu talk contribs deleted page Howto:Can I set ISDN bearer capability (speech or 3.1kHz) on my IP800 GW with v6.00 firmware? (content was: "FAQ: Can I set ISDN bearer capability (speech or 3.1kHz) on my IP800 GW with v6.00 firmware? Thanks. No, the bearer cap is always set appropriately depending on the calls nature (xparent or voice). {{PAGENAME}}", and the only contributor was "Sga" (talk))
14:52, 22 August 2024 Mpu talk contribs deleted page Howto:Can I configure an IP secondary on ethernet interface of my IP800 gateways? If It is possible, can I configure different 802.1Q VLAN id to primary IP and secondary IP (like CISCO sub interfaces)? (content was: "'''FAQ:''' Can I configure an IP secondary on ethernet interface of my IP800 gateways? If It is possible, can I configure different 802.1Q VLAN id to primary IP and secondary IP (like CISCO sub interfaces)? '''Answer:''' No that's actually not possible. {{PAGENAME}}", and the only contributor was "Sga" (talk))
14:51, 22 August 2024 Mpu talk contribs deleted page Howto:Can IP800 gateway support RADIUS protocol? (content was: "FAQ: Can IP800 gateway support RADIUS protocol? Actually, there is no support for the RADIUS protocol. {{PAGENAME}}", and the only contributor was "Sga" (talk))
14:48, 22 August 2024 Mpu talk contribs deleted page Howto:I am developing a web (content was: "#REDIRECT Howto:Retreave PBX User Info form a Web Application", and the only contributor was "Afi" (talk))
14:13, 22 August 2024 Mpu talk contribs deleted page Howto:Is it possible with Innovaphone PBX to make "bigger" conference than just 3 party call? (content was: "Sure it is, there are 3 ways to do it. User can of course "cascade" 3-way conferences, that is, one user creates a conference, the 2 others in turn create a conference with another 3 users and so forth. "poor mans multiparty conference" if you like ;-) The other option is to use a 3rd party conferencing application, such as te-systems Colloquium.IP. See the "related article". ==V6 Sr2== From V6 Sr2 it is possible to use the conference interface on IP6000 for up to 60...")
14:12, 22 August 2024 Mpu talk contribs deleted page Howto:Is there any Tool available to maintain a LDAP Database? (content was: "For LDAP Databases you can use the Softerra LDAP Browser in Version 2.6 . It is a freeware tool an should match most requirements. See the links below for more information. == Related Articles == * [http://www.ldapadministrator.com/download.htm Softerra LDAP Browser] {{PAGENAME}}")
14:10, 22 August 2024 Mpu talk contribs deleted page Howto:It is possible to connect a external device like outlook, and use other CTI devices with TAPI protocol. This I know is possible with standard H.323 devices from your own product portfolio. (content was: "1. when doing an outgoing call (seen from api, lineMakeCall), then what happens is that the PBX will call the originating device (which will let the device ring) and once the user picks up will transfer the call to the real destination (as specified in the lineMakeCall). innovaphone devices will detect this situation and silently accept the call and go into handsfree mode. 3rd party devic...", and the only contributor was "Sga" (talk))
14:10, 22 August 2024 Mpu talk contribs deleted page Howto:Is totalrecall voice recording compatible with innovaphone? (content was: "==Applies To== This information applies to * all innovaphone devices, [http://www.totalrecallvr.com/ comsec's Total Recall Voice Logger] products  ==More Information== The product has not been tested by innovaphone. However, it is a purely passive solution that needs access to un-en...", and the only contributor was "Ckl" (talk))
14:08, 22 August 2024 Mpu talk contribs deleted page Howto:I have the phones IP202, IP 200 and IP100. How can I start a Phonebook Server? I hab seen this funktion on the Web Interface of IP100. (content was: "The IP110 , IP202 and IP200 support LDAP based phone directories. Please refer to the Related Articel below. The IP100 only has access to the built-in PBX directory (providing entries for all configured PBX users). If you are running the latest firmware from the web and use it with an innovaphone PBX, the IP100's directory should work right away. == Related Articles == [http://...", and the only contributor was "Tsr" (talk))
14:08, 22 August 2024 Mpu talk contribs deleted page Howto:Retrieve PBX User Info from a Web Application (content was: "'''FAQ:''' I am developing a web application to handling all the calling data from IP800 to webuser, and what I need to do next is: I want to read users in pbx. Can I do this in http => GET or POST command, or can IP800 send me some way this data? '''Answer:''' You should use the SOAP Interface for this. Have a look at the Reference:SOAP_API#UserInfo.5B.5D_FindUser.28string_v501.2C_string_cn.2C_string_h323.2C_string_e164.2C_integer_count.2C_integer_next.29|FindUser function...")
14:08, 22 August 2024 Mpu talk contribs deleted page Howto:Retrieve PBX User Info form a Web Application (content was: "#REDIRECT Howto:Retrieve PBX User Info from a Web Application", and the only contributor was "Ckl" (talk))
14:08, 22 August 2024 Mpu talk contribs deleted page Howto:Retreave PBX User Info form a Web Application (content was: "#REDIRECT Howto:Retrieve PBX User Info form a Web Application", and the only contributor was "Ckl" (talk))
14:07, 22 August 2024 Mpu talk contribs deleted page Howto:I am currently working with ANT engineer and they have problem that they can not adjust the db(voice level) on IP21. How we can adjust the level. (content was: "There is an option in the config applet called "Volume [-31...32]" for each TEL Interface. Try to increse the volume by entering an appropriate level. {{PAGENAME}}", and the only contributor was "Sga" (talk))
14:07, 22 August 2024 Mpu talk contribs deleted page Howto:I use IXI-Call Version 2.02.0024 Can I download Hotfixes or newer releases of this Software anywhere? Or how can I get hotfixes at all? (content was: "You will need to contact support. There is currently no download mechanism in place for 3rd party software. {{PAGENAME}}", and the only contributor was "Sga" (talk))
14:05, 22 August 2024 Mpu talk contribs deleted page Howto:I have the following problem according the Pickup list. When there is several ongoing active calls you can see them in the pickup list, but if one call is transferred to a GSM phone it disappears (content was: "'''FAQ:''' I have the following problem according the Pickup list. When there is several ongoing active calls you can see them in the pickup list, but if one call is transferred to a GSM phone it disappears '''Answer:''' Not sure if I fully understand the requirement, but if you want to see the status of the GSM, then you must make sure that the GSM does not make any calls bypassing the...", and the only contributor was "Gpa" (talk))
14:04, 22 August 2024 Mpu talk contribs deleted page Howto:I have provisioned 2 ip230s from you. I cannot find the default login information in your documentation. (content was: "'''FAQ:''' I have recently provisioned 2 ip230s from you for the purpose of evaluating them for recommendation and deployment to our customers. I have a unit powered up with an IP address fine. Unfortunately I cannot find the default login information in any of your documentation. '''Answer:''' The default login credentials for all innovaphone products are user: admin pw: type where...", and the only contributor was "Sga" (talk))
14:04, 22 August 2024 Mpu talk contribs deleted page Howto:I have a problem with a ip21 and a fax. It can receive incoming fax but not send any. I think the problem is the dialing. (content was: "'''FAQ:''' I have a problem with a ip21 and a fax. It can receive incoming fax but not send any. I think the problem is the dialing. The fax sends out one digit at the time and the PBX (ip800 fw 6), directy dials up the trunkline (SIP). How do I solve this problem? '''Answer:''' It looks like an overlap dialing problem force the IP21 to enblock dialing. So in the route from the IP21 t...", and the only contributor was "Sga" (talk))
14:03, 22 August 2024 Mpu talk contribs deleted page Howto:I have a IP-202 that seemed to fail during firmware . Red lamp is on, notheing else. I have been told that GWload should help. But in the description, it tels you to start with a "long reset". There (content was: "Press the ALT button while powering on the IP200/202. Keep it pressed for a while (10 seconds). == Related Articles == Howto:How to Reset IPXXX , factory default, led behaviour, tftp mode,clear config,gwload Howto:How_to_use_gwload {{PAGENAME}}")
14:03, 22 August 2024 Mpu talk contribs deleted page Howto:I am hearing a gap in an audio stream when i minimize or maximize a window? (content was: "==Summary== This short document explains a Windows error (before XP) while minimizing or maximizing a window. ==Applies To== This information applies to * SoftwarePhone ==More Information== ===Known Problems=== This is a Windows problem, blocking the sound device for 200ms or even longer when minimizing or maximizing a window. There is no workaround or fix for systems before Window...", and the only contributor was "Sga" (talk))
14:01, 22 August 2024 Mpu talk contribs deleted page Howto:Is innovaphone compatible with Skype? (content was: "No, Skype is using a proprietary protocol which they do not disclose or license for third parties to implement. {{PAGENAME}}", and the only contributor was "Sga" (talk))
14:00, 22 August 2024 Mpu talk contribs deleted page Howto:I deal since some weeks with an ISDN provider about this thing called CLIP no screening, because I like to see the caller ID if I have set a diversion to my mobile. What is CLIP no screening? (content was: "'''FAQ:''' I deal since some weeks with an ISDN provider about this thing called CLIP no screening, because I like to see the caller ID if I have set a diversion to my mobile. What is CLIP no screening? '''Answer:''' Technically spoken, CLIP no screening allows an endpoint (in this case the ipxxx attached to the ISDN trunk) to send calling party information which is not verified ("scre...", and the only contributor was "Sga" (talk))
14:00, 22 August 2024 Mpu talk contribs deleted page Howto:I can see articles titles in my RSS reader, but I receive an error when I try to follow the link to the article (content was: "This is because you will see the titles of ALL articles in the RSS feed, even those, you have no access to. To read the full text, special authorization may be required. == Related Articles == {{PAGENAME}}")
16:32, 19 August 2024 Mpu talk contribs created page Reference15r1:Concept Innovaphone Virtual Appliance (Created page with "{{PAGENAME}}  ==Applies To== This information applies to: *V14r1 *innovaphone Virtual Appliance *Intel/AMD CPUs * Virtualization platforms **VMware *** Workstation *** Player *** vSphere 4.x-6.x *** ESXi 6.0 **Microsoft Hyper-V ([[{{NAMESPACE}}:Concept IPVA On Hyper-V]]) *** Windows 8.1 *** Windows 10 *** Windows Server 2012 R2 *** Windows Server 2016 CTP4 **Linux based Hypervisors with [https://en.wikipedia.org/wik...")
08:58, 30 May 2022 Mpu talk contribs moved page Reference13r3:Apps/PbxManager/App Kuando Connector to Reference13r3:Apps/PbxManager/App Connector for Kuando

All public logs

Navigation menu

Search