Summary
Certification Status
<internal>
Beim Abschluss des Tests (egal ob gut, schlecht oder abgebrochen) bitte Nachricht an ckl!
</internal>
Version
Firmware Version:
1.0.2.3
Hardware Version:
1.0.0.1
innovaphone Firmware:
SR2 HF5
Test Setup
 
Device Setup
| Tested feature | Result | 
| Register Device w/o specific configuration (requires DHCP) |  | 
| DHCP is default |  | 
| DHCP yields timeserver and time displays correctly |  | 
| SNTP config has TZ string for timezone/dst autoconfig |  | 
| DHCP yields correct default gateway |  | 
| Device supports magic registration (e.g. by serial) |  | 
| Fixed registrations works |  | 
| Device registers w/o Extension (just by name) |  | 
| Device registers by name with non-latin1 characters (e.g. UserÄÖÜ) |  | 
| Device registers by extension |  | 
| Device registers with password |  | 
| Device registers multiple identities |  | 
| 2nd GK is supported (mit SIP??) |  | 
| Changing registrations between GK1 and GK2 (mit SIP??) |  | 
| PBX redirect (UserObject on Master/Phone at Slave registered) |  | 
| Physical Location (@PBX) correct? |  | 
| Device supports STUN protocol |  | 
| Device sends NAT - keepalive messages |  | 
| Device usable in  hosting scenarios? |  | 
| Device refreshes the PBX registration |  | 
| Device supports SIP over TCP |  | 
| Device supports SRTP |  | 
| Device supports SIPS (SIP over TLS) |  | 
| Device supports HTTPS |  | 
| Device supports VAD (Voice activity detection) |  | 
| Device supports Auto-Answer (needed when used with CTI client) |  | 
| Supported menu languages |  | 
Test Results
|   | FIXME: Note: Possible test results are Ok, Nok, Not tested, N/A(not available). Ok, Nok, N/A are self explanatory. "Not tested" is more a temporary note - if its still in the test after finishing, then the summary should explain why the feature was not tested. Remove this note in the final report | 
 
Basic Call
| Tested feature | Result | 
| call using g711a |  | 
| call using g711u |  | 
| call using g729 |  | 
| call using g722 |  | 
| Overlapped sending |  | 
| Device sets up an early media channel for incoming calls |  | 
| Device sets up an early media channel for outgoing calls |  | 
| Device shows called id number |  | 
| Device shows called id name |  | 
| Device shows called id display info |  | 
| Fax using T.38 |  | 
| CGPN can be suppressed |  | 
| Reverse Media Negotiation |  | 
| Device shows CDPN/CGPN on incoming call |  | 
| Device shows CDPN/CGPN on outgoing call |  | 
| Device shows connected number |  | 
| Device shows diverting number |  | 
| Device supports distinctive ringing |  | 
| Device supports asymetric codec negotiation |  | 
| Device supports codec renegotiation during a conversation |  | 
| Device shows correct display message in case of busy CDPN |  | 
| Device shows correct display message in case of not existing CDPN |  | 
| Device shows correct display message in case that the call is declined |  | 
| 3party conference possible |  | 
| Device supports display updates during call(needed for Directory Search object) |  | 
| Long Time Call (>30 min) works? |  | 
| Registration redirecting works? |  | 
| Incoming SRTP call - SRTP not enabled on DUT |  | 
| Incoming SRTP call - SRTP enabled on DUT |  | 
| Voice Quality OK? |  | 
DTMF
| Tested feature | Result | 
| DTMF tones sent correctly |  | 
| DTMF tones received correctly |  | 
Hold/Retrieve
| Tested feature | Result | 
| Device handles incoming hold correctly |  | 
| Device can put a call on hold using correctly(inactive or sendonly) |  | 
Transfer with consultation
| Tested feature | Voice Ok? | MoH Ok? | 
| inno1 calls inno2. inno2 transfers to testphone. |  |  | 
| inno1 calls inno2. inno1 transfers to testphone. |  |  | 
| inno1 calls testphone. inno1 transfers to inno2. |  |  | 
| inno1 calls testphone. testphone transfers to inno2. |  |  | 
| testphone calls inno1. inno1 transfers to inno2. |  |  | 
| testphone calls inno1. testphone transfers to inno2. |  |  | 
Transfer with consultation (alerting only)
| Tested feature | Voice Ok? | MoH Ok? | 
| inno1 calls inno2. inno2 transfers to testphone. |  |  | 
| inno1 calls inno2. inno1 transfers to testphone. |  |  | 
| inno1 calls testphone. inno1 transfers to inno2. |  |  | 
| inno1 calls testphone. testphone transfers to inno2. |  |  | 
| testphone calls inno1. inno1 transfers to inno2. |  |  | 
| testphone calls inno1. testphone transfers to inno2. |  |  | 
Blind Transfer
| Tested feature | Voice Ok? | 
| inno1 calls inno2. inno2 transfers to testphone. |  | 
| inno1 calls inno2. inno1 transfers to testphone. |  | 
| inno1 calls testphone. inno1 transfers to inno2. |  | 
| inno1 calls testphone. testphone transfers to inno2. |  | 
| testphone calls inno1. inno1 transfers to inno2. |  | 
| testphone calls inno1. testphone transfers to inno2. |  | 
Blind Transfer (alerting only)
| Tested feature | Voice Ok? | 
| inno1 calls inno2. inno2 transfers to testphone. |  | 
| inno1 calls testphone. testphone transfers to inno2. |  | 
| testphone calls inno1. inno1 transfers to inno2. |  | 
Broadcast Group & Waiting Queue
| Tested feature | Result | 
| testphone makes call to a Broadcast Group. inno1 picks up. |  | 
| inno1 makes call to a Broadcast Group. testphone picks up. |  | 
| testphone makes call to a Waiting Queue. inno1 picks up before announcement is played. |  | 
| testphone makes call to a Waiting Queue. inno1 picks up after announcement is played. |  | 
| inno1 makes call to a Waiting Queue. testphone picks up. |  | 
DTMF Features
| Tested feature | Result | 
| CFU Activate/Deactivate |  | 
| CFB Activate/Deactivate |  | 
| CFNR Activate/Deactivate |  | 
| Pickup Group |  | 
| Pickup Directed |  | 
| Park/Unpark |  | 
| Park To/Unpark From |  | 
| Call Completion Busy |  | 
| Call Completion Cancel |  | 
| Join Group/Leave Group |  | 
| Join All Groups/Leave All Groups |  | 
| Enable mobility/Disable mobility |  | 
| Enable mobility cw/Disable mobility cw |  | 
| Set presence |  | 
Other Features
Directory
| Tested feature | Result | 
| Device built-in directory | 
| Exists |  | 
| Can be dialled from |  | 
| Does CLI resolution |  | 
| display update if directory object is used? |  | 
| Tested feature | Result | 
| External LDAP Server supported |  | 
| Can be dialled from |  | 
| Does CLI resolution |  | 
| display update if directory object is used? |  | 
Keys
| Tested feature | Result | 
| Device has speed dial keys |  | 
| Device has programmable function keys |  | 
| Device has partner keys |  | 
CTI Features (with SOAP / TAPI / myPBX)
| Tested feature | Result | 
| User Call - outgoing call |  | 
| User Connect - Answer incoming call |  | 
| User Reject - Reject alerting call |  | 
| User Disconnect - Disconnect active call |  | 
| User Hold - Put connected call on hold |  | 
| User Hold Retrieve - Retrieve call on hold |  | 
| User Transfer - Transfer with Consult |  | 
| User Transfer - Transfer with Consult (Alerting only) |  | 
| User Transfer - Blind Transfer |  | 
| 3PTY - Make 3rd Party Call |  | 
| Connected Number Update on Display |  | 
UC Features
| Tested feature | Result | 
| Video calls possible? |  | 
| Video conference possible? (max. amount of participants) |  | 
| Video Codecs |  | 
| enable/disable video during call |  | 
| Set own presence possible? |  | 
| See presence of others possible? |  | 
| chat with mypbx client possible? |  | 
| chat with same vendor client possible? |  | 
| send IM - messages to phones possible? |  | 
Configuration
innovaphone configuration
3rd party product configuration
Related Articles