Howto:Firmware Upgrade V12r1 V12r2
Jump to navigation
Jump to search
Applies To
This information applies to:
- All PBX devices
- All DECT devices
- Linux Application Platform
Configuration Changes
Changed Semantics of conditional Call Forward
From the beginning, phone numbers used as a condition in an E.164 setup needed to be configured as full numbers starting from the root node. This is obviously wrong so that it has been fixed for v12r2 (see fix 13402 - PBX use adjusted number for checking numbers on call forward).
Hardware restrictions
Following hardware is no more supported by V12r2 due to memory issues:
- IP72
- IP110
- IP150
- IP200A
- IP230
- IP240
- IP302
- IP305
- IP800
- IP2000
- IP6000
Modernized types of above mentioned models (IP110A, IP200B, IP240A) will support V12r2 as well as the devices of the current portfolio.
Related Articles
- Howto:Guideline V5 to V6 upgrade
- Howto:Upgrade Issues V5 to V6
- Howto:Firmware Upgrade V6 V7
- Howto:Firmware Upgrade V7 V8
- Howto:Firmware Upgrade V8 V9
- Howto:Firmware Upgrade V9 V10
- Howto:Firmware Upgrade V10 V11r1
- Howto:Firmware Upgrade V11r1 V11r2
- Support:Special_Precaution_required_when_upgrading_IPxx11_Gateways_from_pre-SR14_Firmware_Versions
- Howto:Firmware Upgrade V11r2 V12r1