There are also other versions of this article available:
Reference (this version) | Reference9
WLAN
| SSID:
|
The SSID for the WLAN.
|
Security
| Cipher:
|
The The encryption type mode the WLAN.
|
| WEP Key index:
|
The WEP key index (1-4) used when transmitting data.
|
| WEP Key:
|
WEP key for the WLAN.
|
Security Mode
| Association Mode:
|
The association mode the WLAN (None, WPA or WPA2).
|
| Authentication Mode:
|
The authentication mode the WLAN (EAP - without dynamic key exchange, LEAP - with and without dymanic key exchage, and PEAP-MSCHAPv2 with dymanic key exchange).
|
| Passphrase:
|
The passphrase used for WPA-PSK.
|
| User:
|
The user name used for EAP (PEAP, LEAP) authentication.
|
| Password:
|
The password used for EAP (PEAP, LEAP) authentication.
|
Supported WLAN Configurations
| Cipher |
Auth |
Assoc |
Security |
|
| None |
None |
None |
None |
|
| WEP or WEP128 |
None |
None |
WEP-Key and WEP-Index |
|
| WEP or WEP128 |
EAP-MD5 |
None |
WEP-Key and WEP-Index, User and Password |
|
| WEP or WEP128 |
LEAP |
None |
WEP-Key and WEP-Index, User and Password |
|
| TKIP |
LEAP |
None |
User and Password |
|
| TKIP |
None |
WPA or WPA2 |
Passphrase |
|
| TKIP |
PEAP-MSCHAPv2 |
WPA or WPA2 |
User and Password |
|
| AES-CCMP |
None |
WPA2 |
Passphrase |
|
| AES-CCMP |
PEAP-MSCHAPv2 |
WPA2 |
User and Password |
|
Power Management
| Power Save:
|
Power save options for WLAN.
|
| Power management:
|
Power management.
|
Regulatory Domain
| Domain:
|
Regulatory domain.
|
Roaming
| RSSI Threshold:
|
RSSI Threshold when to start roaming.
|
| Channel Mask:
|
Channel bitmask. Provide here a HEX number for channels that should be scanned by handset. Is used to increase roaming performance.
Examples:
0x1FFF = 1111111111111 scan all 13 Channels
0x7FF = 11111111111 scan all 11 Channels
0x421 = 10000100001 scan only 11,6,1
0x1020 = 1000000100000 scan only 13 and 6
|