Reference13r1:Apps/PbxManager/Trunks
Jump to navigation
Jump to search
Configure your Trunklines
Add Trunk
Create a new Trunk object on the PBX
- Name
- The Long Name of the PBX object
- SIP
- The name of the PBX object
- Number
- The number of the object
- Loopback
- target number, when the called number is the trunk-number
- See Trunk specific configurations
- Incomplete
- target number, when the called number is incomplete
- See Trunk specific configurations
- Invalid
- target number, when an incomming call was received
- See Trunk specific configurations
- Busy
- target number, when an incomming call was received with: busy
- See Trunk specific configurations
- Rejected
- target number, when an incomming call was received with: rejected
- See Trunk specific configurations
- No anwser
- target number, when an incomming call was received with: no answer
- See Trunk specific configurations
- Interfaces/SBC
- You have first to create the Trunk and klick OK. Afterwards you can reopen the Trunk configuration and configure the connected Interface/SBC
Edit Trunk
- Interfaces/SBC
- Klick (+ Add) to select the target Gateway.
- Klick on the Gateway, you wont to use.
- Chuse if you wont to connect an ISDN-Interface (BRI/PRI/TEL) or an SBC Interface (SIP) to this Trunk.
- Interface
- All possible interfaces where lited. Chuse one, by clicking on them.
- Select a protocoll
- Point to Point (most ISDN with a number area)
- Point to Multipoint (most ISDN with single numbers)
- Manual (Setting was not changed, standart: Point to Multipoint); no wizzard for numbermapping
- After selecting a protocol a wizzard opend to configure the "numbermapping" of the interface.
- The same protocol you have to configure manual in the Admin UI in interfaces.
- SBC (SIP)
- Klick on the country code where the provider of your SIP came from.
- Select the SIP wizzard of your SIP contract.
Known issues
- defintion of protocol mode PtP (default PtmP) in PBXManager has no effect to the physical interface settings
- adjustment has to be done via AdvancedUI
- Line-bound SIP connections are not listed.
- More options for the trunk objekt you find in the Admin UI / PBX / Objects / trunk-object.