Reference13r1:App-Platform/Installation
Jump to navigation
Jump to search
The innovaphone App Platform can be automatically installed in one single step here.
Prerequisites
- IP settings configured under App Platform/IP
- Proxy ARP enabled under IP4/ETH/IP
- mSATA module for an IPx11 or a CF card on an IPx10
Installation
The default image URL is found by searching for a linux.json file on https://store.innovaphone.com/release/download.htm In this case, your device must have internet access!
You can also enter a direct URL to a remote or local webserver with the image file, e.g. http://store.innovaphone.com/beta/download/app-platform/80003/app-platform-armel.img
The following steps are executed during installation:
- download of the image through HTTP
- upload of the image to the SSD/CF card
- configuration of ram disk and starting of the ramdisk
- the ram disk creates a new partition with the real size of the disk
- starting of the new rootfs partition
After the installation, the App Platform can be directly accessed through it's IP address.
Related Articles
Reference13r1:Concept_App_Platform
Known issues
This can't be used to install the former Linux Application Platform! Please refer to Concept Linux Application Platform in this case.