Reference:Configuration/Registration/Directories
Jump to navigation
Jump to search
There are also other versions of this article available:
Reference (this version) | Reference9 | Reference10 | Reference12r1 | Reference13r1
In this menu, there are three options for how the telephone can access telephone directories.
local enable
- A private telephone directory can be created on the device itself and used.
PBX enable
- Furthermore, all subscribers of the innovaphone PBX can be made available as a telephone directory entry.
- User name: User name required for registration that is stored on the innovaphone PBX.
- Password: Password for the user name, which you confirm in the Retype box.
An external database is usable as a telephone directory via the LDAP protocol.
External LDAP server
- Here, you enter the LDAP access parameters for the external telephone directory.
- Server: IP address of the LDAP server.
- Port: Matching part to the IP address.
- User name: User name for authentication at the LDAP server.
- Password: Password that goes with the user name.
- Retype: Confirmation of the password.
The following parameters are necessary for searching within the external database. Contact the administrator of the remote database for information.
- Search base
- Mode
- Object filter
- Sort results (by 1st LDAP name attribute)
- Name attributes
- Number attributes
- H.323 ID attributes
Dialling location
- In order that the call numbers obtained from the databases may be converted into diallable telephone numbers, the parameters for your own connection must be made known.
- Country code: Own country code without prefix or special characters.
- Area code: Own area code / traffic discrimination digits.
- National line (carrier-specific): Sequence of digits to obtain a national exchange access line.
- International line (carrier-specific): Sequence of digits to obtain an international exchange access line.
- External prefix: Sequence of digits to obtain an external access line.
- Root numbers (pbx-specific): For the conversion of complete internal numbers, you can enter here the root numbers to be removed for the internal dialling of the call number.