Reference13r1:Apps/PbxManager/Trunks
Configure your Trunklines
Add Trunk
Create a new Trunk object on the PBX
- Name
- The Long Name of the PBX object
- SIP
- The name of the PBX object
- Number
- The number of the object
- Loopback
- target number, when the called number is the trunk-number
- See Trunk specific configurations
- Incomplete
- target number, when the called number is incomplete
- See Trunk specific configurations
- Invalid
- target number, when an incomming call was received
- See Trunk specific configurations
- Busy
- target number, when an incomming call was received with: busy
- See Trunk specific configurations
- Rejected
- target number, when an incomming call was received with: rejected
- See Trunk specific configurations
- No anwser
- target number, when an incomming call was received with: no answer
- See Trunk specific configurations
- Interfaces/SBC
- You have first to create the Trunk and klick OK. Afterwards you can reopen the Trunk configuration and configure the connected Interface/SBC
Edit Trunk
- Interfaces/SBC
- Select the target Gateway and the Interface (BRI/PRI/TEL) or an SBC Interface (SIP1-SIP16) for the Trunk
Known issues
- defintion of protocol mode PtP (default PtmP) in PBXManager has no effect to the physical interface settings
- adjustment has to be done via AdvancedUI