Reference:Configuration/IP/Routing
Jump to navigation
Jump to search
There are also other versions of this article available:
Reference (this version) | Reference9
The routing table of the current IP configuration of the gateway is displayed here. The table is used for fault analysis by the network administrator. The table is structured as follows:
- Destination Network: The destination network address.
- Network Mask: The associated network mask.
- Gateway: The IP-Adresse of the default router.
- Interface: Displays the interface on which the route was created. Possible interfaces are: ETH0, ETH1, PPP0-31, Local and ISDN.
- State: Possible states are: Up or Down.