This product is being tested right now. The test is not yet completed.
Testing Enviroment
Test Results
For more information on the test procedure, please read the following wiki article: SIP Interop Test Description. Bold lines in the test results indicate a KO-criteria.
FIXME: Note: Possible test results are Ok, Nok, Not tested, N/A(not available). Ok, Nok, N/A are self explanatory. "Not tested" is more a temporary note - if its still in the test after finishing, then the summary should explain why the feature was not tested. Remove this note in the final report
Basic Call
Tested feature
Result
call using g711a
OK
call using g711u
OK
call using g723
NA
call using g729
OK
call using g722
NA
Overlapped sending
Nok
early media channel
OK
Fax using T.38
OK
T.38 Transcoding by the provider
OK
Reverse Media Negotiation
OK
CGPN can be suppressed
OK
CLIP no screening
OK
Long time call possible(>30 min)
OK
External Transfer
OK
NAT Detection
OK
Redundancy
NA
SIP over TCP
OK
Voice Quality OK?
OK
Direct Dial In
Tested feature
Result
Inbound(Provider -> Innovaphone)
OK
Outbound(Innovaphone -> Provider)
OK
Loop In call(Innovaphone -> Provider -> Innovaphone)
OK
DTMF
Tested feature
Result
DTMF tones sent correctly via RTP-events(RFC 2833)
OK
DTMF tones sent correctly via SIP-Info
OK
DTMF tones received correctly via RTP-events(RFC 2833)
OK
Hold/Retrieve
Tested feature
Result
Call can be put on hold
OK
Held end hears music on hold / announcement from PBX
OK
Transfer with consultation
Tested feature
Result
Call can be transferred
OK
Held end hears music on hold
OK
The following tests are made to test if call transfer is working.
Tested feature
Voice Ok?
MoH Ok?
inno1 calls inno2. inno2 transfers to PSTN-phone.
OK
OK
inno1 calls PSTN-phone. inno1 transfers to inno2.
OK
OK
inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
OK
OK
PSTN-phone calls inno1. inno1 transfers to inno2.
OK
OK
PSTN-phone calls inno1. PSTN-phone transfers to inno2.
OK
OK
PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
OK
OK
Transfer with consultation (alerting only)
Tested feature
Result
Call can be transferred
OK
Held end hears music on hold or dialling tone
OK
Call returns to transferring device if the third
Endpoint is not available
Not Tested
The following tests are made to test if call transfer is working.
Tested feature
Voice Ok?
MoH Ok?
inno1 calls inno2. inno2 transfers to PSTN-phone.
OK
inno1 calls PSTN-phone. inno1 transfers to inno2.
OK
inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
OK
PSTN-phone calls inno1. inno1 transfers to inno2.
OK
PSTN-phone calls inno1. PSTN-phone transfers to inno2.
OK
PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
OK
Blind Transfer
Tested feature
Result
Call can be transferred
OK
Held end hears dialling tone
OK
The following tests are made to test if call transfer is working.
Tested feature
Voice Ok?
MOH Ok?
inno1 calls inno2. inno2 transfers to PSTN-phone.
OK
OK
inno1 calls PSTN-phone. inno1 transfers to inno2.
OK
OK
inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
OK
OK
PSTN-phone calls inno1. inno1 transfers to inno2.
OK
OK
PSTN-phone calls inno1. PSTN-phone transfers to inno2.
OK
OK
PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
OK
OK
CFU / CFB Transfer
Tested feature
Result
Call can be forward
OK
Held end hears dialling tone
OK
CFNR / Blind Transfer (alerting only)
Tested feature
Result
Call can be transferred or forward
OK
Held end hears dialling tone
OK
The following tests are made to test if call transfer is working.
Tested feature
Voice Ok?
inno1 calls inno2. inno2 transfers to PSTN-phone.
OK
inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
OK
PSTN-phone calls inno1. inno1 transfers to inno2.
OK
PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.