IP1130 Technical Data EN
innovaphone® AG | Umberto-Nobile-Str. 15 | 71063 Sindelfingen | Germany | T +49 7031 73009-0 | F +49 7031 73009-9 | info@innovaphone.com | www.innovaphone.com
Errors, delivery times and technical specifications may be subject to change. Copyright © 2023 innovaphone® AG
Illustration
Datasheet
innovaphone IP1130
Media Gateway for one ISDN PRI interface plus reverse proxy and SBC functionalities
Firmware
Device operated with Version 11r2sr10 or higher
Housing
Size: 210 x 148 x 32 mm
one height unit (HU) for 19” systems
Weight: 1050 g
Interfaces
1 x PRI-interface (S2M): for connection of ISDN-PRI-trunkline, use on E1 or T1 lines, RJ-45 (modular Jack 8P8C), TE or NT mode operation
2 x Gigabit Ethernet: 1000-BASE-T (auto negotiation), RJ-45 (modular Jack 8P8C)
„Power over Ethernet“ according to IEEE 802.3af, Class 3
Energy Efficient according to IEEE 802.3az
Hardware
Power supply: Power over Ethernet according to IEEE 802.3af, Class 3
800 MHz CPU, 0.25 GB RAM, 32 MB Flash
Operation temperature: 0 °C to +45 °C
Humidity: 10% to 90% (not condensed)
Storage temperature: -10 °C to +70 °C
Digital Signal Processor (DSP) for up to 30 voice/audio conference channels
Seven channels for the innovaphone faxserver using T.38 or via G.711. In case of G.711, each faxtransmission consumes 2 DSP channels.
Voice Codecs
G.711 A-law / µ-law,
G.722,
G.723.1 (5.3),
G.729A and
Opus-NB
incl. VAD (Voice Activity Detection), CNG (Comfort Noise Generation)
Dynamic Jitter Buffering
Echo cancellation according to G.168
Modem support
Generic Features
generic features V11 innovaphone gateways
generic features V12 innovaphone gateways
Order number
01-01130-001
Datenblatt
innovaphone IP1130
Media-Gateway für einen ISDN-S2M Anschluss sowie Reverse Proxy und SBC Funktionalitäten
Firmware
Gerät betreibbar mit Version 11r2sr10 oder höher
Gehäuse
Gehäuse
Abmessungen: 210 x 148 x 32 mm
eine Höheneinheit (HE) für 19“ Systeme
Gewicht: 1050 g
Schnittstellen
1 x S2M-Schnittstelle (PRI): für Anschluss an ISDN-S2M-Amtsleitungen, Nutzung an E1 oder T1 Verbindungen, RJ-45 (modular Jack 8P8C), TE oder NT Betrieb
2 x Gigabit-Ethernet: 1000-BASE-T (auto negotiation), RJ-45 (modular Jack 8P8C)
„Power over Ethernet“ nach IEEE 802.3af, Class 3
Energy Efficient nach IEEE 802.3az
Hardware
Stromversorgung: Power over Ethernet entsprechend IEEE 802.3af, Class 3
800 MHz CPU, 0.25 GB RAM, 32 MB Flash
Betriebstemperatur: 0 °C bis +45 °C,
Luftfeuchtigkeit: 10% bis 90% (nicht kondensierend)
Lagertemperatur: -10 °C bis +70 °C
Digitaler Signalprozessor (DSP) für bis zu 30 Sprach/Konferenzkanäle
7 Kanäle für den innovaphone Faxserver mit T.38 oder über G.711. Im Falle von G.711 werden bei pro Faxübertragung 2 DSP-Kanäle belegt.
Sprach Coder
G.711 A-law / µ-law,
G.722,
G.723.1 (5.3),
G.729A und
Opus-NB
mit VAD (Voice Activity Detection), CNG (Comfort Noise Generation)
Dynamic Jitter Buffering,
Echo Kompensation: G.168
Modemunterstützung
Allgemeine Leistungsmerkmale
allgemeine Leistungmerkmale V11 innovaphone Gateways
allgemeine Leistungmerkmale V12 innovaphone Gateways
Bestellnummer
01-01130-001
CE-Declarations
Conformities
{{{1}}}
WEEE-Number
innovaphone WEEE-Number
DE 31703754