There are also other versions of this article available:
Reference (this version) | Reference9
WLAN
SSID:
|
The SSID for the WLAN.
|
Security
Cipher:
|
The The encryption type mode the WLAN. (Old WEP Styles in 64 and 128 bit versions, obsoleted Cisco CKIP, WPA - TKIP and WPA2-AES-CCMP).
|
WEP Key index:
|
The WEP key index (1-4) used when transmitting data.
|
WEP Key:
|
WEP key for the WLAN.
|
Security Mode
Association Mode:
|
The association mode the WLAN (None, WPA or WPA2).
|
Authentication Mode:
|
The authentication mode the WLAN (EAP - without dynamic key exchange, LEAP - with and without dymanic key exchage, and PEAP-MSCHAPv2 with dymanic key exchange).
|
Passphrase:
|
The passphrase used for WPA-PSK.
|
User:
|
The user name used for EAP (PEAP, LEAP) authentication.
|
Password:
|
The password used for EAP (PEAP, LEAP) authentication.
|
Supported WLAN Configurations
Cipher |
Auth |
Assoc |
Security |
|
None |
None |
None |
None |
|
WEP or WEP128 |
None |
None |
WEP-Key and WEP-Index |
|
WEP or WEP128 |
EAP-MD5 |
None |
WEP-Key and WEP-Index, User and Password |
|
WEP or WEP128 |
LEAP |
None |
WEP-Key and WEP-Index, User and Password |
|
TKIP |
LEAP |
None |
User and Password |
|
TKIP |
None |
WPA or WPA2 |
Passphrase |
|
TKIP |
PEAP-MSCHAPv2 |
WPA or WPA2 |
User and Password |
|
AES-CCMP |
None |
WPA2 |
Passphrase |
|
AES-CCMP |
PEAP-MSCHAPv2 |
WPA2 |
User and Password |
|
Power Management
Power Save:
|
Power save options for WLAN.
|
Power management in idle mode:
|
Power management
|
Power management in call mode:
|
Power management.
|
Regulatory Domain
Domain:
|
Regulatory domain.
|
Roaming
RSSI Threshold:
|
RSSI Threshold when to start roaming.
|
Channel Mask:
|
Channel bitmask. Provide here a HEX number for channels that should be scanned by handset. Is used to increase roaming performance.
Examples:
0x1FFF = 1111111111111 scan all 13 Channels
0x7FF = 11111111111 scan all 11 Channels
0x421 = 10000100001 scan only 11,6,1
0x1020 = 1000000100000 scan only 13 and 6
|