Reference14r1:Settings/Phone settings/Device settings
There are also other versions of this article available:
Reference7 | Reference14r1 (this version)
Applies to
- innovaphone deskphones (IP1xx, IP2x2) with at least firmware 14r1sr5
More information
Starting with firmware 14r1sr5, energy saving options for display can be applied.
Configuration options
Manually via Phone
Step to Settings / Phone settings / Device settings
- LCD light : Set current display brightness. 0 (off) - 15 (max)
- LCD light (idle state) : Display brightness applied 30s after last action. 0 (off) - 15 (max)
- Energy saving : Time frame in which the display is switched off. Format <sh>-<eh> whereas sh = starthours and eh=endhours.
- E.g. 17-09 turns off display between 17 o'clock (5pm) until 9 o'clock (9am). Default is 18-06.
To prevent display dimming, either define Energy saving to 00-00, or set LCD light and LCD light (idle state) to same level.
Configfile entries for automated deployment
- LCD light :
vars create PHONE/LCD-BACKLIGHT p 8
- LCD light (idle state) :
vars create PHONE/LCD-IDLE-BACKLIGHT p 2
- Energy saving :
vars create PHONE/ENERGY-SAVING-TIME p 17-09
Known issues
With some display types, deactivation of the default energy saving time settings is at expense of the service life.