Datasheet IP38

innovaphone IP38

Analog VoIP gateway with 8 analog interfaces (FXO)

Size: 210 x 148 x 32 mm

one height unit (HU) for 19” systems

Weight: 660 g

Interfaces

8 x a/b interface, FXO, RJ-11 (modular Jack 6P2C), two PINs in the middle used

1 x Ethernet: 10/100-BASE-TX (auto negotiation), RJ-45 (modular Jack 8P8C)

„Power over Ethernet“ according to IEEE 802.3af, Class 3

Energy Efficient according to IEEE 802.3az

Hardware

Power supply: Power over Ethernet according to IEEE 802.3af, Class 3

125 MHz CPU, 0.03 GB RAM, 16 MB Flash

recommended ambient working temperature: 0 °C to +45 °C

Humidity: 10% to 90% (not condensed)

Storage temperature: -10 °C to +70 °C

Digital Signal Processor (DSP) for up to 8 voice channels

Voice Codecs

G.711 A-law / µ-law, G.729A

Dynamic Jitter Buffering

Echo compensation

Voice Activity Detection

Comfort Noise Generation

Modem support

innovaphone PBX

Platform for up to 10 PBX Users (all-in-one)

VoIP Protocols

H.323 Version 5, including proprietary extensions

H.323 over UDP, TCP, TLS 1.3

SIP Version 2, conform RFC 3261

SIP over UDP, TCP, TLS

RTP, SRTP (SDES, DTLS 1.2), RTCP, ICE

T.38 Fax (supported rates 9.6k and 14.4k) incl. fallback to G.711 (device dependent)

ISDN protocols

valid for gateways including S0/S2M interfaces

Euro ISDN D-channel protocol (E-DSS1)

QSIG D-channel protocols: ECMA1, ECMA2

US D-channel protocols: USA-National-ISDN-1, USA-5ESS, USA-DMS100

Connection modes: Point-to-Point (PtP), Point-to-Multipoint (PtMP)

S0: up to 2 speech channels per interface

S20 E1/T1: up to 30/23 ISDN-speech channels per interface

Operation mode TE/NT adjustable per interface

myApps Application Platform

Universal system platform for application services and client operation

Can be operated on gateway models xx11/xx13 (not 1130) or as a virtual solution

Platform services (excerpt)

Device and user management
Contact directory
Call reporting
Voice recording
Conferencing
Alarm and event management
File management
Calendar integration
Various third-party services

myApps client services (excerpt)

Business applications – Social Intranet, Project Management, Time Tracking
UC applications – Softphone, Video, Chat, Fax, Voicemail
Two-factor authenticated access
Client versions for Windows, macOS, iOS, Android, Browser
Virtual desktop versions for Citrix Workspace, Windows Remote Desktop, Linux (Ubuntu, IGEL, Rangee)

Network

IPv4/IPv6 Support

NAT, H.323-NAT, STUN, TURN over UDP/TCP

RSTP, EAP-TLS/EAP-MD5 acc. to IEEE 802.1X

LDAP/S support

DHCP support

NTP support

VLAN-ID acc. to IEEE 802.1Q

LLDP support for VLAN configuration

PPPoE, manual or automatic connection after boot

PPTP Tunneling up to 32 tunnels simultaneously, encoding via MPPE

Reverse Proxy, various SBC-functionalities (IPxx11/IPxx13/11xx recommended)

Administration

Password protected administration access via web-browser

Store and restore configuration files

System-wide automatic upgrade of firmware and configuration data via the myApps Devices app

Automatic ping connection test

Display of interface and connection status

Generation of log and trace files and SNMPv3-traps

Supplementary Features

Calling Line Identification
DTMF tone generation
Separate volume settings for external devices
Detection of dialtones
Detection of busy tones
Detection of ringing tones and ringing currents

Device-specific licences

Depending on the model, additional PBX channels licences (02-00020-007) for soft conferencing can be extended.

Conformities

see separate information sheet

Order Number: 01-00038-001

This product is end of life.