Version
Firmware Version:
0.0.62
Hardware Version:
530v2
Certification Status
This product is being tested right now. The test is not yet completed.
Device Setup
| Tested feature
|
Result
|
| Register Device w/o specific configuration (requires DHCP)
|
no
|
| DHCP is default
|
yes
|
| DHCP yields timeserver and time displays correctly
|
no
|
| SNTP config has TZ string for timezone/dst autoconfig
|
no
|
| DHCP yields correct default gateway
|
yes
|
| Device supports magic registration (e.g. by serial)
|
no
|
| Fixed registrations works
|
yes
|
| Device registers w/o Extension (just by name)
|
yes
|
| Device registers by extension
|
no
|
| Device registers with password
|
yes
|
| Device registers multiple identities
|
no
|
| Device supports STUN protocol
|
no
|
| Device sends NAT - keepalive messages
|
no
|
| Device refreshes the PBX registration
|
yes
|
| Device supports SIP over TCP
|
no
|
| Device supports SIPS (SIP over TLS)
|
no
|
| Device supports HTTPS
|
no
|
| Device supports VAD (Voice activity detection)
|
?
|
Test Results
Basic Call
| Tested feature
|
Result
|
| call using g711a
|
yes
|
| call using g711u
|
yes
|
| call using g729
|
no
|
| Overlapped sending
|
?
|
| Early media channel
|
no
|
| Device shows called id number
|
no
|
| Device shows called id name
|
no
|
| Device shows called id display info
|
no
|
| Fax using T.38
|
no
|
| CGPN can be supressed
|
no
|
| Reverse Media Negotiaton
|
?
|
| Device shows CDPN/CGPN on incoming call
|
no
|
| Device shows CDPN/CGPN on outgoing call
|
no
|
| Device shows connected number
|
no
|
| Device shows diverting number
|
no
|
| Device supports distinctive ringing
|
?
|
| Device supports asymetric codec negotiation
|
no
|
| Device supports codec renegotiation during a conversation
|
yes
|
| Device shows correct display message in case of busy CDPN
|
no
|
| Device shows correct display message in case of not existing CDPN
|
no
|
| Device shows correct display message in case that the call is declined
|
no
|
| Voice Quality OK?
|
yes
|
DTMF
| Tested feature
|
Result
|
| DTMF tones sent correctly
|
no
|
| DTMF tones received correctly
|
no
|
Hold/Retrieve
| Tested feature
|
Result
|
| Device handles incoming hold (inactive) correctly
|
yes
|
| Device handles incoming hold (sendonly) correctly
|
yes
|
| Device can put a call on hold using correctly(inactive or sendonly)
|
no
|
Transfer with consultation
| Tested feature
|
Voice Ok?
|
MoH Ok?
|
| inno1 calls inno2. inno2 transfers to testphone.
|
|
|
| inno1 calls inno2. inno1 transfers to testphone.
|
|
|
| inno1 calls testphone. inno1 transfers to inno2.
|
|
|
| inno1 calls testphone. testphone transfers to inno2.
|
|
|
| testphone calls inno1. inno1 transfers to inno2.
|
|
|
| testphone calls inno1. testphone transfers to inno2.
|
|
|
Transfer with consultation (alerting only)
| Tested feature
|
Voice Ok?
|
MoH Ok?
|
| inno1 calls inno2. inno2 transfers to testphone.
|
|
|
| inno1 calls inno2. inno1 transfers to testphone.
|
|
|
| inno1 calls testphone. inno1 transfers to inno2.
|
|
|
| inno1 calls testphone. testphone transfers to inno2.
|
|
|
| testphone calls inno1. inno1 transfers to inno2.
|
|
|
| testphone calls inno1. testphone transfers to inno2.
|
|
|
Blind Transfer
| Tested feature
|
Voice Ok?
|
| inno1 calls inno2. inno2 transfers to testphone.
|
|
| inno1 calls inno2. inno1 transfers to testphone.
|
|
| inno1 calls testphone. inno1 transfers to inno2.
|
|
| inno1 calls testphone. testphone transfers to inno2.
|
|
| testphone calls inno1. inno1 transfers to inno2.
|
|
| testphone calls inno1. testphone transfers to inno2.
|
|
Blind Transfer (alerting only)
| Tested feature
|
Voice Ok?
|
| inno1 calls inno2. inno2 transfers to testphone.
|
|
| inno1 calls inno2. inno1 transfers to testphone.
|
|
| inno1 calls testphone. inno1 transfers to inno2.
|
|
| inno1 calls testphone. testphone transfers to inno2.
|
|
| testphone calls inno1. inno1 transfers to inno2.
|
|
| testphone calls inno1. testphone transfers to inno2.
|
|
Broadcast Group & Waiting Queue
| Tested feature
|
Result
|
| testphone makes call to a Broadcast Group. inno1 picks up.
|
yes
|
| inno1 makes call to a Broadcast Group. testphone picks up.
|
?
|
| testphone makes call to a Waiting Queue. inno1 picks up before announcement is played.
|
yes
|
| testphone makes call to a Waiting Queue. inno1 picks up after announcement is played.
|
yes
|
| inno1 makes call to a Waiting Queue. testphone picks up.
|
?
|
Other Features
Directory
| Tested feature
|
Result
|
| Device built-in directory exists?
|
no
|
| Can be dialled from
|
no
|
| Does CLI resolution
|
no
|
Hands free
| Tested feature
|
Result
|
| Loudspeaker operation works fine
|
yes
|
| Hands free works fine
|
yes
|
| Volume adjustable during call
|
no
|
Keys
| Tested feature
|
Result
|
| Device has speed dial keys
|
yes
|
| Device has programmable function keys
|
no
|
Known Problems
timezone settings can not be received via DHCP,
Cat-cable is connected via screw terminals not via LSA Plus,
installation is quiet filigreed and should only be done by qualified personal,
Related Articles