Howto:NL - MOTTO - VaMo Configuration

From innovaphone wiki
Jump to navigation Jump to search

Product Name

Motto Sim card

Certification Status

This product is listed due to a customer testimonial. No tests have been conducted by innovaphone.

Vendor test report and configuration hints were received Apr 26th, 2019

Category

This is a previously tested third-party product. The information provided here may no longer be up to date.

Use of the product in combination with current innovaphone products is at your own responsibility.

innovaphone does not offer technical support for this product. If you have any questions, please contact the third-party provider directly using the contact details provided below.

Description

Integrating a normal mobile cellphone or smartphone to your PBX as a SIP-client.

Features

Summary of the features:

  • Routing options available in the Flux portal:
    • Route calls to the PBX
    • Route calls to mobile
    • Mixed
    • Scheduled

Use the native dialer of your mobile phone for internal and/or external calls to PSTN as it is a normal internal user on the PBX.

Configuration

This configuration is for registering a Motto Sim card to the PBX using a Innovaphone Session Border Controller.

PBX configuration

Create a new user object. 

Description: 	Motto VaMo
Long Name: 	Name of the user
Display Name:   Name of the user	
Name:		(international format of the mobile number example: 31612345678)
Number:	 	(extension number for this user)
Password:	(password for the SIP registration)	
Hardware Id:	(international format of the mobile number example: 31612345678)
PBX password:	On


Session Border Controller object setup

On he SBC create a net Session Border object for the SIM: 

Long Name: 	Name of the user
Password:	(password for the SIP registration)
Media Relay: 	On
Gatekeeper Id:	ID of the PBX
Primary Adr:	IP of the PBX
Name:		(international format of the mobile number example: 31612345678)
PBX Password:	On
Name:		(extension number for this user)
PBX Password:	Off
TLS Only:	Off

Press OK


Set Sip config on the PBX and SBC

Set this option using Maintenance, Diagnostics, Command. 

!config add SIP /take-source-addr-as-contact-addr /x-ice-disabled
!config write
!config activate

reboot the PBX and SBC to be sure these options have been enabled.


Motto Flux portal SIM card settings

Device: 		SIM card 
Registration server:	IP or DNS name of the Session Border Controller.
SRV option 	 	(disabled)
Port: 			5060 (SIP port)
From user: 		(extension of the user object)
Username: 		(international format of the mobile number example: 31612345678)
Password: 		(password of the user object)
DTMF signaling mode: 	auto

Register the SIM.

Check the registration on the SBC and PBX using the logging.

Adjust the settings on the portal to route calls to the PBX / mobile or scheduled mixed.


Contact

Aaltjan Evink

WH2A B.V.

Gildenveld 63

3892 DD Zeewolde

Flevoland, Nederland

Email: info@wh2a.com

Support: support@wh2a.com

Tel: +31 36 522 7879

Retrieved from "https://wiki.innovaphone.com/index.php?title=Howto:NL_-_MOTTO_-_VaMo_Configuration&oldid=77575"